• Transactions on Electrical and Electronic Materials
• /
• 제4권6호
• /
• pp.13-16
• /
• 2003

Mn-doped $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) thin film phosphors have been grown using a pulsed laser deposition technique under various growth conditions. The structural characterization carr~ed out on a series of $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) films grown on MgO(l00) substrates usmg Zn-rich ceramic targets. Oxygen pressure was varied from 50 to 200 mTorr and Zn/Ga ratio was the function of oxygen pressure. XRD patterns showed that the lattice constants of the $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) thin film decrease with the substitution of sulfur and selenium for the oxygen in the $ZnGa_2O_4$. Measurements of photoluminescence (PL) properties of $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) thin films have indicated that MgO(100) is one of the most promised substrates for the growth of high quality $ZnGa_2O_{4-x}M_{x}$:$Mn^{2+}$ (M=S, Se) thin films. In particular, the incorporation of Sulfur or Selenium into $ZnGa_2O_4$ lattice could induce a remarkable increase in the intensity of PL. The increasing of green emission intensity was observed with $ZnGa_2O_{3.925}Se_{0.075}:$Mn^{2+}$ and $ZnGa_2O_{3.925}S_{0.05}$:$Mn^{2+}$ films, whose brightness was increased by a factor of 3.1 and 1.4 in comparison with that of $ZnGa_{2}O_{4}$:$Mn^{2+}$ films, respectively. These phosphors may promise for application to the flat panel displays.

• Bulletin of the Korean Chemical Society
• /
• 제27권7호
• /
• pp.1038-1042
• /
• 2006

A new type of DTPA-bis-amides (L1-L4) and their Gd(III)-complexes of the type $[Gd(L)(H_2O)]{\cdot}nH_2O$ (5: L1; 6: L2; 7: L3; 8: L4) have been prepared and characterized by analytical and spectroscopic techniques. The X-ray crystal structure of 8 has been determined for structural confirmation. The coordination geometry adopts a tricapped trigonal prism geometry with L4 acting as a chelate octadentate and a water molecule in the coordination sphere. Crystals are monoclinic, $P2_1$, a = 14.468(3), b = 19.235(4), c = 13.527(2) $\AA$ $\beta$ = $107.245(3)^{\circ}$, V = 3595.2(11) $\AA^3$, Z = 4, $D_{calc}$ = 1.570. Significant increases in relaxivities are observed with 6 and 7 as compared with that of $Omniscan^{(R)}$, a commercial MR agent: R1 = 12.46 $mM^{-1}\;s^{-1}$, R2 = 8.76 $mM^{-1}\;s^{-1}$ for 6; R1 = 12.77 nm-1 s-1, R2 = 7.60 mM-1 s-1 for 7; R1 = 4.9 $mM^{-1}\;s^{-1}$, R2 = 4.8 $mm^{-1}\;s^{-1}$ for $Omniscan^{(R)}$. In the case of 5, however, both R1 and R2 are found to be lower to show 2.09 $mM^{-1}\;s^{-1}$, and 1.82 $mM^{-1}\;s^{-1}$, respectively.

• 한국동물학회지
• /
• 제28권4호
• /
• pp.227-236
• /
• 1985

LDH 동위효소의 4차구조 형성기작을 규명하기 위한 일환으로 웅성 흰쥐 복강내에 여러 가지 농도의 tetrodotoxin을 수차 주사한 후, 전기영동 및 densitometry에 의해 여러 조직내의 5가지 동위효소의 상대적 분포의 변화를 조사하였다. 뇌조직에서는 $H_4$ 동위효소가 현저히 증가하였고, 골격근조직에서 $M_4$ 동위 효소는 약간 증가한 반면 $M_3H$ 및 $M_2H_2$ 동위효소들은 감소되었으며, 심장조직에서는 M/H 비가 급격히 감소되었으며, 간조직에서는 소량의 $H_4$ 동위효소 형성이 나타났다. 이러한 결과들은 Donnan막 평형의 변화가 LDH 동위효소 분포의 변화를 초래할 수 있음을 시사한다. Tetrodotoxin에 노출된 흰쥐의 여러 조직내에서 $M_3H$ 동위효소 형성이 감소되는 사실로 미루어 고유한 세포질내 환경이 변화되면 3M+H 조합은 쉽게 이우러지지 않는 것으로 사료된다. 원형질 막의 어떤 sodium channel은 tetrodotoxin에 민감하지 않다는 사실이 재확인 되었다.

• 유기물자원화
• /
• 제9권4호
• /
• pp.55-60
• /
• 2001

본 연구에서는 음식물 쓰레기의 주입형태에 따른 혐기성 소화조의 메탄가스 발생특성에 대해 알아보고자 하였다. 하수슬러지와 음식물 쓰레기를 각각 1:0, 1:0.1, 1:0.3, 1:0.5, 1:1, 1:2의 비율로 혼합소화시킨 반응조에서의 주입 g VS당 메탄가스 발생량은 40mL, 85mL, 62mL, 67mL, 72mL 및 73mL $CH_4/g$ $VS_{added}$였다. 음식물 쓰레기의 입경을 raw food, 2~4mm 그리고 2mm이하로 주입하여 혼합소화시킨 반응조에서의 메탄함량이 각각 51.1%, 53.1% 및 50.6%로 나타나 별차이를 보이지는 않았으나, 입경이 작을수록 높은 메탄발생량을 나타내는 것으로 조사되었다. 주입 음식물 쓰레기의 세척여부와 회수에 따른 탄발생량은 음식물 쓰레기를 7~8회 세척한 경우가 세척하지 않은 경우보다 약 11mL $CH_4/g$ $VS_{added}$ 많이 발생하였다.

• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.529-536
• /
• 2008

Cyanobacteria Synechocystis PCC 6803 or the extracted thylakoid membrane from this strain was appled to photosynthetic bio-electrochemical fuel cell(PBEFC) for the production of hydrogen under the illumination of 48Klux using halogen lamp. PBEFC was composed of anode, cathode and membrane between them. Electrode material was carbon paper while electron mediator and receptor were added phenazine methosulfate(PMS) and potassium ferricyanide respectively. When water and 50 mM tricine buffer and $300{\mu}M$ PMS were added to the anode under the light condition, PBEFC produced the current density $4.4{\times}10^{-5}\;mA/cm^2$, $1.4{\times}10^{-4}\;mA/cm^2$ and $2.4{\times}10^{-4}\;mA/cm^2$, respectively. And the addition of the thylakoid membrane to the system increased current density to $1.3{\times}10^{-3}\;mA/cm^2$. Two times increase of the thylakoid membrane into the anode doubled the current density to $2.6{\times}10^{-3}\;mA/cm^2$. But the current density was not increased proportionally to the amount of thylakoid membrane increased. The system was unstable to measure the electricity output due to the foam production in the anode. Addition of triton X-100 and tween 80 stabilized the system to measure the electricity output but the current density was not increased higher than $8.4{\times}10^{-4}\;mA/cm^2$ and $2.3{\times}10^{-3}\;mA/cm^2$. When the thylakoid membrane was substituted to Synechocystis PCC 6803 cells of four-day culture which has chlorophyll contents $20.5{\mu}g/m{\ell}$, maximum current density was $1.3{\times}10^{-3}\;mA/cm^2$ with $1\;k{\Omega}$ resistance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.435-436
• /
• 2008

Dye-sensitized Solar Cells(DSSCs) which convert incident sun light into electricity were expected to overcome global warming and depletion of fossil fuels. And it is one of study that is lately getting into the spotlight because manufacturing method is more simple and inexpensive than existing silicon solar cells. In this respect, DSSCs are in the limelight as the next generation solar cells. DSSCs are generally composed of a dye-modified $TiO_2$ photoelectrode, a Pt counter electrode, and an electrolytes containing a redox couple$(I^-/I_3^-)$. Among these elements, pt electrode were prepared by applying electric potential to FTO substrate in the $H_2PtCl_6$ solution. In this study, we report the solar cell efficiency depending on $PtCl_4$ concentration change. $PtCl_4$ concentration was 1mM, 5mM, 10mM, and 20mM, and adhered on FTO glass substrate by sintering process. When applied each $PtCl_4$ counter electrode on DSSC, the best efficiency was found at 10mM of $PtCl_4$ concentration. The catalyst promotes the movement of electron from the counter electrode to the electrolyte the higher the molarity, the better the efficiency. However, in case of 20mM, it is estimated that over-deposited $PtCl_4$ tends to restrict the movement of electron due to its bundle formation.

• Journal of Animal Science and Technology
• /
• 제61권4호
• /
• pp.225-233
• /
• 2019

The aim of this study was to produce porcine tetraploid (4N) parthenogenetic embryos using various methods and evaluate their developmental potential. In method 1 (M1), porcine 4N parthenogenetic embryos were obtained by inhibiting extrusion of both first (PB1) and second (PB2) polar bodies; in methods 2 (M2) and 3 (M3), 4N parthenogenetic embryos were obtained by electrofusion of 2-cell stage diploid parthenogenetic embryos derived from inhibition of PB2 or PB1 extrusion, respectively. We found no differences in the rates of cleavage or blastocyst formation or the proportion of 4N embryos among M1, M2, and M3 groups. The different methods also did not influence apoptosis rates (number of TUNEL-positive cells/number of total cells) or expression levels of apoptosis-related BAX and BCL2L1 genes. However, total cell and EdU (5-ethynyl-2'-deoxyuridine)-positive cell numbers in 4N parthenogenetic blastocysts derived from M1 were higher (p < 0.05) than those for M2 and M3 groups. Our results suggest that, although porcine 4N parthenogenetic embryos could be produced by a variety of methods, inhibition of PB1 and PB2 extrusion (M1) is superior to electrofusion of 2-cell stage diploid parthenogenetic embryos derived from inhibition of PB2 (M2) or PB1 (M3) extrusion.

• Applied Biological Chemistry
• /
• 제31권4호
• /
• pp.376-381
• /
• 1988

Rhodotorula glutinis IFO 0559에 의한 transcinnamic acid와 암모니아로부터 L-Phenylalanine 생산의 최적 조건을 검토하였다. L-phenylalanine 생산은 반응액으로 200mM transcinnamic acid, 4M $NH_4OH$, 250mM$(NH_4)_2SO_4$, 0.005% cetylpyridiniurn chloride (pH 10.5), 50mg/m1건조균체를 사용하였을 때 최대 생산량을 나타내었다. 비수용성 유기용매중에서 petroleum ether가 가장 효과적인 유기용매이였으며 반응액에 50% 첨가시 가장 효과가 좋았다. 최적 반응조건하에서 12시간 반응후 L-phenylalanine이 21.19생성되었으며, 이때의 trans-cinnamic acid의 전환율은 63.9%이었다.

• Applied Biological Chemistry
• /
• 제38권4호
• /
• pp.283-288
• /
• 1995

시판 농약류의 미생물에 대한 독성을 검정한 결과 제초제인 paraquat(1,1'-dimethyl-4,4'-bipyridylium dichloride)가 편성혐기성 세균을 제외한 세균류와 효모 및 곰팡이에 걸치는 광범위한 미생물의 증식을 저해하였다. Paraquat는 $1.0\;{\mu}M$(0.186ppm)의 농도에서도 공시균(Escherichia coli KCTC 1039)의 turbidometric growth를 지연시켰으나, 생균수 변화 및 well test 등의 결과로부터 공시균에 대한 paraquat의 생육저지 최소 농도는 1.0mM(186ppm)로 평가되었다. Paraquat 처리시 공시균의 생균수는 처리직후에 대조구의 약 50%로 급격히 감소되었으나, 이후 4시간 동안 1.0mM의 paraquat 존재하에서도 유의적으로 증가되었다. 그러나 처리 4시간 이후로는 생균수가 서서히 감소되었으며 계속된 배양에도 불구하고 재증식은 관찰되지 아니하였다.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.122-125
• /
• 1994

Nd 함유량을 4 at.%로 고정시킨 Nd-Fe-B 합금의 자기특성이 조사되었다. 급속응고된 $Nd_{4}Fe_{85.5}B_{10.5}$ 합금은 열처리에 의하여 ${\alpha}-Fe$ 연자성기지에 석출되며, $Nd_{4}Fe_{85.5}B_{10.5}$ 합금에 Mo, Nb, V 및 Cu의 첨가는 결정립을 미세화시켜 보자력을 향상시킨다. 그러나 ${\alpha}-Fe$ 결정립에 의한 각형성 열화는 잔류자화를 감소시킨다. $Nd_{4}Fe_{82}B_{10}M_{3}Cu_{1}$(M = Mo, Nb, V) 합금에서 보자력은 M = V < Nb < Mo로 증가하며, M = Mo에서 2.7 kOe이고, 잔류자화는 M = Mo < Nb < V순으로 증가하며 M = V에서 1.35 T이다.