• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.782-795
• /
• 2019

Safety is always acritical focus of exploration of ocean resources, and it is well recognized that human factor is one of the major causes of accidents and breakdowns. Our research developed a dynamic human reliability assessment approach, Predicted Mean Vote-Cognitive Reliability and Error Analysis Method (PMV-CREAM), that is applicable to monitoring the cognitive reliability of oceanauts during deep-sea missions. Taking into account the difficult and variable operating environment of manned submersibles, this paper analyzed the cognitive actions of oceanauts during the various procedures required by deep-sea missions, and calculated the PMV index using human factors and dynamic environmental data. The Cognitive Failure Probabilities (CFP) were calculated using the extended CREAM approach. Finally, the CFP were corrected using the PMV index. This PMV-CREAM hybrid model can be utilized to avoid human error in deep-sea research, thereby preventing injury and loss of life during undersea work. This paper verified the method with "Jiaolong" manned submersible 7,000 m dive test. The"Jiaolong" oceanauts CR(Corrected CFP) is dynamic from 3.0615E-3 to 4.2948E-3, the CR caused by the environment is 1.2333E-3. The result shown the PMV-CREAM method could describe the dynamic human reliability of manned submersible caused by thermal environment.

• 한국위성정보통신학회논문지
• /
• 제2권1호
• /
• pp.14-20
• /
• 2007

군 위성통신체계는 민/군 공용 위성인 무궁화 5호의 군용 탑재체 및 군 전용 위성통신 단말로 이루어져 있으며, 위성통신 단말들은 위성통신 서비스 영역에 분포하여 위성통신 링크를 구성하여 통신하게 된다. 원격지에 위치한 군용 위성통신 단말의 운용상태에 대한 감시를 중앙 집중적으로 수행하기 위하여 위성 단말 관리 시스템이 개발되었다. 군 위성통신체계는 군의 특성상 유사시를 대비한 통신시스템이고 위성통신단말들이 이동하므로, 지상통신수단(예, 광케이블, M/W등)을 관리링크로 사용할 수 없으므로, 원격지 단말과의 통신수단은 위성통신링크 만을 사용해야 한다. 위성통신 단말관리 링크는 한 개의 위성단말 관리시스템과 복수개의 위성단말과의 통신을 위하여 1:N 통신방식을 사용하고 있다. 본 논문에서는 위성단말 관리시스템에서 설계/구현된 관리 프로토콜 구조에 대하여 설명하고, 위성통신 단말관리 링크의 성능을 시뮬레이션을 통해 분석하여 개발된 위성단말 관리 시스템으로 군용 위성통신 단말관리가 가능함을 기술한다.

• 대한전자공학회논문지SD
• /
• 제39권8호
• /
• pp.34-41
• /
• 2002

본 논문에서는 가상 캐리 예측 덧셈기(pseudo carry look-ahead adder)를 사용하여 분할형 워드 기반 RSA의 구현에 관한 방법을 제안하고 검증하였다. 효율적인 모듈라 곱셈기의 설계를 위해 병렬 2단CSA(carry-save adder) 구조를 사용하였으며 마지막 덧셈의 고속 처리를 위하여 캐리 발생과 지연시간이 짧은 가상 캐리 예측 덧셈기를 적용하였다. 제안한 모듈라 곱셈기는 분할형 워드를 기반으로하여 다음 모듈라 연산을 위해 매 클럭마다 쉬프트와 정렬 연산이 필요없기 때문에 하드웨어를 줄일 수 있으며 고속 모듈라 곱셈 연산을 가능하게한다. 제안한 연산 구조를 PCI 인터페이스를 갖는 FPGA로 기능을 검증한 후 0.5㎛ 삼성 gate array 공정을 사용해서 256 워드 모듈라 곱셈기를 기반으로 한 1024-bit RSA 암호프로세서를 단일 칩으로 구현하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.425-435
• /
• 2016

This paper describes a spread-spectrum clock generation method by utilizing a ${\Delta}{\Sigma}$ digital PLL (DPLL) which is solely based on binary phase detection and does not require a linear time-to-digital converter (TDC) or other linear digital-to-time converter (DTC) circuitry. A 1-bit high-order ${\Delta}{\Sigma}$ modulator and a hybrid finite-impulse response (FIR) filter are employed to mitigate the phase-folding problem caused by the nonlinearity of the bang-bang phase detector (BBPD). The ${\Delta}{\Sigma}$ DPLL employs a two-point modulation technique to further enhance linearity at the turning point of a triangular modulation profile. We also show that the two-point modulation is useful for the BBPLL to improve the spread-spectrum performance by suppressing the frequency deviation at the input of the BBPD, thus reducing the peak phase deviation. Based on the proposed architecture, a 3.2 GHz spread-spectrum clock generator (SSCG) is implemented in 65 nm CMOS. Experimental results show that the proposed SSCG achieves peak power reductions of 18.5 dB and 11 dB with 10 kHz and 100 kHz resolution bandwidths respectively, consuming 6.34 mW from a 1 V supply.

• 한국전자거래학회지
• /
• 제4권1호
• /
• pp.87-101
• /
• 1999

To operate the automatic devices of manufacturing process more effectively and to solve the needs of the resource sharing, network technology is applied to the control devices located in common manufacturing zone and operated by connecting them. In this paper, functional standard of the network layers are set as physical and data link layer of IEEE 802.2, 802.4, and VMD application layer and ISO-CIM reference model. Then, they are divided as minimized architecture, designed as group objects which perform group management and service objects which organizes and operates the group. For the stability in this network, this paper measures the variation of data packet length and node number and analyzes the variated value of the waiting time for the network operation. For the method of the analysis, non-exhausted service method are selected, and the arrival rates of the each data packet to the nodes that are assumed to form a Poission distribution. Then, queue model is set as M/G/1, and the analysis equation for waiting time is found. For the evalution of the performance, the length of the data packet varies from 10 bytes to 100 bytes in the operation of the group management network, the variation of the wating time is less than 10 msec. Since the waiting time in this case is less than 10 msec, response time is fast enough. Furthermore, to evaluate the real time processing of the group management network, it shows if the number of nodes is less than 40, and the average arrival time is less than 40 packet/sec, it can perform stable operation even taking the overhead such as software delay time, indicated packet service, and transmissin safety margin.

• KIEAE Journal
• /
• 제5권3호
• /
• pp.41-48
• /
• 2005

Before occupation of an apartment housing, the builders are required to inform the test result of IAQ to the public. However, there is no simplified method to predict IAQ before measurement of pollutant concentration. In this study, a simplified way of predicting IAQ based on the distribution of indoor pollutant concentration is proposed. 7 different cases of air change rate have been simulated through CFD analysis to get the distribution ratio of each pollutant material and then simplified functions were used with CRIAQ1 values derived from CFD simulation to evaluate by comparing the influence of each material in the indoor pollutant concentration. Again, a lot of efforts which can improve the indoor air quality have been performed. Materials used in indoor space are labeled with their pollutant emission level. Installation of ventilation system in residential buildings will be regulated by a building codes sooner or later. But it is important to understand the fact that layout of walls, location or size of openings will influence the indoor air flow and pollutant concentration. And location of emitting material influences to indoor air pollutants distribution. But until now there is few recognition and consideration of these factors. Therefore, in this paper the effects of these factors is proved and some kind of guideline is made for designers after a comparison of typical apartment floor plan and a new type plan with their average pollutant concentration and its distribution of each room. CFD(Computational Fluid Dynamics) program was used to show the indoor air flow and pollutant concentration distribution. For this purpose, a typical $100m^2$ apartment floor plan was chosen as a case study model and several alternatives were reviewed to improve the IAQ performance. The simulation took place in the condition of natural ventilation through windows.

• KIEAE Journal
• /
• 제13권3호
• /
• pp.71-78
• /
• 2013

A need for building energy efficiency is on the issue since energy demand in the building stock in Korea represents about 24% of the final energy consumption. As a way of improving the thermal performance of buildings for reducing maintenance costs and environmental conservation, a lot of effort is shown to improve the building energy efficiency by applying improvement of envelope insulation performance for buildings whose energy efficiency is low relatively through the remodeling. The windows of building envelopes are areas that lead to the biggest heat loss in the building. So windows are considered to be the primary target of energy efficiency in remodeling and various studies for windows have been done. Currently, however, only U-factor and airtightness of windows performance are regulated. Window wall ratio(WWR) and solar heat gain coefficient(SHGC) of windows are not considered when conducting the remodeling. In this study appropriate performance of windows(U-factor and SHGC) for existing residential is proposed according to the window wall ratio by using EnergyPlus. As the results of this study, the U-factor of windows representing the maximum energy savings is $1.0W/m^2K$ but in case of SHGC, the values that indicate the maximum energy savings are different depending on the window wall ratio. Therefore, when conducting the remodeling of windows, to determine energy efficiency by considering only the U-factor is inadequate so it is necessary that appropriate windows are applied to buildings by considering window wall ratio and windows properties(U-factor and SHGC).

• 한국환경농학회지
• /
• 제22권4호
• /
• pp.251-254
• /
• 2003

Phosphorous removal rate and emergent plant growth were examined of a surface-flow constructed treatment wetland system, whose dimensions were 31 meter in length and 12 meter in width. The system was established on floodplain in the down reach of the Kwangju Stream in Korea in one and half months from May to June 2001. Cattails(Typha angustiflora) were transplanted in the system. They were dug out of natural wetlands and stems were cut at about 40 cm height from their bottom ends. Water of the Kwangju Stream were funneled into it via a pipe by gravity flow and its effluent were discharged back into it. The stems of cattails grew from 45.2 cm in July 2001 up to 186 cm in September 2001 and the number of cattail stems per square meter increased from 22 in July 2001 to 53 in September 2001. The early establishment of cattails was good. Volume and water quality of inflow and outflow were analyzed from July 2001 through December 2001. Inflow averaged $40\;m^3/day$ and hydraulic retention time was about 1.5 days. The concentration of total phosphorous in influent and effluent was 0.85 mg/L, 0.41 mg/L, respectively. The average removal rate of total phosphorous in the system was about 52%. The retention efficiency was slightly lower, compared with that in surface-flow wetlands operating in North America, whose retention efficiency was reported to be about 57%. The lower abatement rate could result from the initial stage of the system and inclusion of two cold months into the six-month monitoring period. Root rhizosphere in wetland soils and litter-soil layers on bottoms were not properly developed. Increase of standing density of cattails within a few years will establish both root zones and substrates beneficial to the removal of phosphorous, which may lead to increase of the phosphorous retention rate. The system was submerged one time by heavy storm during the monitoring period. The inundation, however, scarcely disturb its environment.

• 한국수산과학회지
• /
• 제35권6호
• /
• pp.608-613
• /
• 2002

순간접착제를 이용하여 곰피를 인공 기질에 부착시킨 후, 수중에 이식하여 인공 해중림 조성의 방안을 마련하기 위한 연구를 실시하였다. 계절별로 채집 동정된 해조류는 녹조류 8종 ($16.7\%$), 갈조류 12종 ($25.0\%$) 및 홍조류 28종 ($58.3\%$)으로 총 48종이었다. 곰피는 2000년 11월 순간접착제로 건축용 타일 ($10\times$10cm)에 부착시킨 후, 이 타일을 수중 자연암반에 고정시켜 이식실험을 실시하였다. 이식 1개월 후 타일은 성공적으로 암반에 고정되어 $75.0\%%의 부착율을 보였다. 타일에는 $66.7\%$의 높은 착생율로 22개체의 곰피가 착생하여 생장하였다. 2개월 후, 타일에 착생한 곰피는 유실된 개체로 인해 6개체가 기질에 착생하여 생장하였지만, 착생초기에 비해 새로운 포복지가 많이 재생되었으며 엽체의 생육상태도 좋았다. 이식 7개월 후인 2001년 8월, 6개체였던 곰피는 포복지가 재생되어 총 71개체로 증가하였다. 곰피는 초기 이식한 개체수가 파도에 의한 유실이나 섭식에 의한 탈락이 많았지만, 건강하게 자란 개체들의 활발한 포복지 재생에 의해서 많은 개체수로 증가하였다. 이는 낮은 착생율을 보일지라도 건강하게 자란 엽체가 있을 경우, 이들 개체로부터 많은 재생이 일어날 수 있음을 시사하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.210-211
• /
• 2007

Amid booming PV(photovoltaic) industry, BIPV(Building Integrated PV) is one of the best fascinating PV application technologies. To apply PV in building, variable factors should be reflected such as installation position, shading, temperature effect and so on. Especially a temperature should be considered, for it affects both electrical efficiency of PV module and heating and cooling load in building. Transparent PV modules were designed as finished material for spandrels are presented in this paper. The temperature variation of the modules with and without air gap and insulation were compared and analyzed. The results showed that the module with air gap and insulation has a much larger temperature variation than another transparent module. The temperature of the module reached by 55degree C under vertical irradiance of lower 500$W/m^2$. And the temperature difference between these modules was about 15degree C. To analyze the output performance of module according to temperature variation, separate module was manufactured and measured by sun-simulator. The results showed that 1 degree temperature rise reduced about 0.45% of output power.