• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3B
• /
• pp.275-286
• /
• 2011

As the 21st century paradigm of healthcare service changes from post-therapeutic treatment to disease prevention and management in advance, the M2M-based u-healthcare application service is increasingly important. M2M-based u-healthcare application service uses mobile handsets equipped with sensors to measure vital information, and the medical staff in remote locations can manage the health of the patient or the public in real time. In this paper, IEEE/HL7 translation gateway, utilizing the gateway based on M2M u-healthcare application service structure, which is based on international standards, has been designed and implemented. Specifically, the gateway between ISO/IEEE 11073 standards and ANSI HL7 has been developed. The former defines the protocol for the exchange of information between the agent device and the manger devices for measuring and handling biological signal, and the latter defines the application layer protocol for the exchange of various healthcare information systems. Finally, in order to demonstrate the functionality of the proposed architecture, the M2M-based U-healthcare application service based on IEEE/HL7 translation gateway, utilizing the gateway, has been developed which can measure, collect and process a variety of vital signs such as ECG or SpO2.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1117-1125
• /
• 1996

A low-cost and precise metering device, which is suitable to automatic mixing of nutrient-solution for hydroponic culture, was developed for small-scale growers. The metering accuracy of the metering device developed was compared with commercial metering pumps. The mixing performance through the control of EC and pH was also evaluated. The accuracy of the metering device in terms of the full -scale error was $\pm$0.3% , which was much better compared to $\pm$2.45% and $\pm$1.38% for the two types of commercial metering pumps. The mixing system of nutrient-solution with the metering device showed a satisfactory control performance with the accuracies of $\pm$0.05mS/cm and$\pm$0.2pH for EC and pH, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.10
• /
• pp.936-940
• /
• 2005

IMML(Inorganic metal multi-layer) was used as cathode in the OLED devices to reduce the reflectance or ITO and increase the contrast ratio. Device structure was $ITO/{\alpha}-NPD/Alq_3:DCJTB/Alq_3/IMML/Al$. $Alq_3$ and DCJTB (4 - (dicyanomethylene) - 2 - ( 1 - propyls) 6 - methy 4H - pyrans) as host material lot red emission and red emitting guest material. IMML made three different layer: thin aluminum layer, aluminum layer doped with silicon monoxide, thick aluminum layer. The red OLED device with IMML showed the average reflectance of $4.97\%$, and then normal OLED with or without polarizer showed the average reflectance of $4.55\%$, $46\%$ at visible range from 380 nm to 780 nm. The brightness of OLED with IMML at 13 V was 5557 $cd/m^2$, and that of normal OLED with polarizer was 4872 $cd/m^2$. IMML could be the substitution for polarizer with same reflection, low cost, easy process in flat panel display market.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1764-1770
• /
• 2020

The present work was mainly concerned with studying the operation of RC-phase shift oscillator based on MOSFET type 2N6660 under the influence of different temperature levels ranging from room temperature (25 ℃) up-to135 ℃ and gamma-irradiation up-to 3.5 kGy. In this concern, both the static (I-V) characteristic curves of MOSFET devices and the output signal of the proposed oscillator were recorded under ascending levels of both temperature and gamma-irradiation. From which, it is clearly shown that the drain current was decreased from 0.22 A, measured at 25 ℃, down to 0.163 A, at 135 ℃. On the other hand, its value was increased up-to 0.49 A, whenever the device was exposed to gamma-rays dose of 3.5 kGy. Considering RC-phase shift oscillator, the oscillation frequency and output pk-pk voltage were decreased whenever MOSFET device exposed to gamma radiation by ratio 54.9 and 91%, respectively. While, whenever MOSFET device exposed to temperature the previously mentioned parameters were shown to be decreased by ratio 2.07 and 46.2%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.8
• /
• pp.484-490
• /
• 2017

We investigated the rewritable operation of a non-volatile memory device composed of Al (top)/$TiO_2$/indium-zinc-oxide (IZO)/Al (bottom). The oxygen-deficient IZO layer of the device was spin-coated with 0.1 M indium nitrate hydrate and 0.1 M zinc acetate dehydrate as precursor solutions, and the $TiO_2$ layer was fabricated by atomic layer deposition. The oxygen vacancies IZO layer of an active component annealed at $400^{\circ}C$ using thermal annealing and it was proven to be in oxygen vacancies and oxygen binding environments with OH species and heavy metal ions investigated by X-ray photoelectron spectroscopy. The device, which operates at low voltages (less than 3.5 V), exhibits non-volatile memory behavior consistent with resistive-switching properties and an ON/OFF ratio of approximately $3.6{\times}10^3$ at 2.5 V.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.4
• /
• pp.307-311
• /
• 1999

Interfacial properties of electrode and organic thin layer is one of the most important factor in performing a Light Emitting Diodes(LED). Phthalocyanine copper was used as a buffer layer to improve interface characteristic, so that device efficiency was improved. In this study, LEDs were fabricated as like structures of Indium-Tin-Oxide (ITO) / N,N' -Diphenyl-N,N'-di(m-tolyl)-benzidine (TPD) / 8-Hydroxyquinoline aluminum(Alq) / Aluminum(Al) and Indium-Tin-Oxide(ITO) / N,N'-Diphenyl-N,N' -di(m-tolyl)-benzidine(TPD) / 2-(4-Biphenylyl)-5(4-tert-butyl-phenyl)-1,3,4-oxadiazole(PBD) / Aluminum(Al). In these devices, CuPC was layered at electrode/organic layer interface. As position is changing and thickness is changing, devices showed characteristic luminescence efficiency and luminescence inensity respectively. We showed in this study that luminescence efficiency was improved with CuPC layer in LEDs. The efficiency of device with layer CuPC is higher than that of 2 layer CuPC. However, the luminescence of 2 layer CuPC device got higher value.

• Journal of Information Processing Systems
• /
• v.8 no.3
• /
• pp.521-538
• /
• 2012

As the knowledge society matures, not only distant, but also off-line universities are trying to provide learners with on-line educational contents. Particularly, high effectiveness of mobile devices for e-Learning has been demonstrated by the university sector, which uses distant learning that is based on blended learning. In this paper, we analyzed previous m-Learning scenarios and future technology prospects. Based on the proposed m-Learning scenario, we designed cellular phone-based educational contents and service structure, implemented m-Learning system, and analyzed m-Learning service satisfaction. The design principles of the m-Learning service are 1) to provide learners with m-Learning environment with both cellular phones and desktop computers; 2) to serve announcements, discussion boards, Q&A boards, course materials, and exercises on cellular phones and desktop computers; and 3) to serve learning activities like the reviewing of full lectures, discussions, and writing term papers using desktop computers and cellular phones. The m-Learning service was developed on a cellular phone that supports H.264 codex in 3G communication technology. Some of the functions of the m-Learning design principles are implemented in a 3G cellular phone. The contents of lectures are provided in the forms of video, text, audio, and video with text. One-way educational contents are complemented by exercises (quizzes).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.228-230
• /
• 2001

We synthesized Bis(3-N-ethylcarbazolyl) terephthalidene(BECP) and Bis(3-7-ethyl-carbazolyl) cyanoterephthalidene(BECCP) and characterized EL properties of these materials. Our device shows a strong blue emission at 472 nm with a luminance efficiency of 0.9 lm/W at a voltage, a current density, and a brightness of 8 V, 5.7 mA/cm$^2$, and 130 cd/m$^2$, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2001.08a
• /
• pp.157-158
• /
• 2001

We synthesized Bis(3-N-ethylcarbazolyl) terephthalidene(BECP) and Bis(3-N-ethylcarbazolyl) cyanoterephthalidene (BECCP) and characterized EL properties of these materials. Our device shows a strong blue emission at 472 nm with a luminance efficiency of 0.9 lm/Wat a voltage, a current density. and a brightness of 8 V, 5.7 $mA/cm^2$, and 130 $cd/m^2$, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.4
• /
• pp.470-474
• /
• 2005

The efficiency of a short-term treatment with an intravaginal device containing progesterone (CIDR) combined with pregnant mares' serum gonadotrophin (PMSG) and prostaglandin analogue ($PGF_{2\alpha}$) was evaluated for the induction of estrus, initiation of cyclic activity, and fertility in postpartum suckled yak cows. Seventy-five postpartum suckled yak cows were assigned to three treatments: (1) insertion of a CIDR intravaginal progesterone (1.9 g) (day 0), an administration of $PGF_{2\alpha}$ (0.2 mg i.m.) on day 6 and PMSG (1,000 IU i.m.) at the time of CIDR withdrawal on day 7 (CPP group, n=28); (2) an administration of $PGF_{2\alpha}$ (0.2 mg i.m.) on day 6 and PMSG (1,000 IU i.m.) on day 7 (PP group, n=21); (3) untreated animals served as the control (CG group, n=26). Seven yak bulls were placed in pastures with the cows for natural mating. Estrus rate in the CPP group (28/28) was higher (p<0.01) than in the PP group (6/21) and in the CG group (0/26) within 96 h after the end of treatment. The first service conception rate in the CPP group (21/28) was higher (p<0.01) compared with in the PP group (2/9) as judged by serum $P_4$ concentration $\geq$2.35 ng/ml on day 21 after breeding. It is concluded that a short-term progesterone treatment combined with PMSG and prostaglandin increased the proportion of yak cows that exhibited behavioral estrus with more synchronized estrus response and satisfactory conception rate in postpartum suckled yak cows.