• Journal of the Korean institute of surface engineering
• /
• v.17 no.2
• /
• pp.41-58
• /
• 1984

Zinc was electrodeposited from cyanide solutions at temperature from 20$^{\circ}C\;to\;40^{\circ}C$ in the range of current density from 0.5 to 8A/$dm^2$. The preferred orientation changed from (10.3)+(11.0) to (11.0) texture with increasing cathode overpotential in the additive free solution, while the (11.0) preferred orientation developed at lower overpotentials (800-1270 mV) and the (11.0)+(10.0) preferred orientation was formed at higher overpotential (1300-1400mV) in the solution with brightner. Mossy type of morphology developed mostly in the additive free deposits and the microstructure of the cross section of the above deposits changed from columar structure to granular structure with increasing overpotential. The surface appearance of the deposits with additive having (11.0) texture was the smooth deposit of very small crystallite, while that of the deposits having (11.0)+(10.0) texture was fine crystalline deposit. The microstructure of the cross section of them was the fine field oriented type of structure.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.116-122
• /
• 2014

This study was conducted to find out the appropriate packaging materials to extend the storability and maintain the quality of cherry tomato for modified atmosphere (MA) storage. Tomatoes were grown by hydroponic at a plastic house in Gangwon Province. Light red maturity stage tomatoes were harvested and packed with MA condition (10,000; 20,000; 40,000; 60,000; 80,000; and $100,000cc/m^2.day.atm$ $O_2$ permeability film) and perforated film to store at $5^{\circ}C$, $11^{\circ}C$ and $24^{\circ}C$. The fresh weight loss was less than 0.6% in all non-perforated breathable films at $^5{\circ}C$, $11^{\circ}C$, and $24^{\circ}C$, but perforated film had less than 2.93% at $5^{\circ}C$, 13.29% at $11^{\circ}C$ and 27.24% at $24^{\circ}C$. The 20,000cc at $5^{\circ}C$ and $11^{\circ}C$, and the 40,000cc film at $24^{\circ}C$ balanced optimum carbon dioxide and oxygen concentration in the package to maintain quality. The 10,000cc film was appeared the significantly highest ethylene concentration at $5^{\circ}C$, $11^{\circ}C$, and $24^{\circ}C$, this film had the lowest $O_2$ permeability. Visual quality, firmness, and soluble solids were maintained in 20,000cc films both at $5^{\circ}C$ and $11^{\circ}C$, the 40,000cc film at $24^{\circ}C$. There was no any trend in titratable acidity and vitamin C content of treated packed film types and temperatures at cherry tomatoes packages. Therefore, the appropriate MA condition for $5^{\circ}C$ and $11^{\circ}C$ is $20,000cc/m^2.day.atm$ $O_2$ permeability film; for $24^{\circ}C$ it is $40,000cc/m^2.day.atm$ $O_2$ permeability film because those films extended the storability through the firmness, soluble solids as well as visual quality.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.1
• /
• pp.7-18
• /
• 2002

Interstellar cabon monoxide and its isotopes were observed with the 13.7m radio telescope of the Daeduk Radio Astronomy Observatory toward Orion Molecular Cloud-1 (OMC-1). We derive the excitation temperature, optical depth, column density, and isotopic abundance ratios from the observed lines of $^{12}CO,^{13}CO,\;and\;C^{18}O$ inside of the region of $11'{\times}11'$. The optical depths of $^{13}CO$ were obtained to be 0.1~0.4, while those of $C^{18}O$ to be 0.01~0.03. The isotopic ratios $^{12}C/^{13}C$ were also estimated to be 2~60. We could not find the radial isotopic ratio $^{12}C/^{13}C$ gradient in the OMC-1.

• BMB Reports
• /
• v.47 no.11
• /
• pp.609-618
• /
• 2014

DNA methylation at cytosines (5mC) is a major epigenetic modification involved in the regulation of multiple biological processes in mammals. How methylation is reversed was until recently poorly understood. The family of dioxygenases commonly known as Ten-eleven translocation (Tet) proteins are responsible for the oxidation of 5mC into three new forms, 5-hydroxymethylcytosine (5hmC), 5-formylcytosine (5fC) and 5-carboxylcytosine (5caC). Current models link Tet-mediated 5mC oxidation with active DNA demethylation. The higher oxidation products (5fC and 5caC) are recognized and excised by the DNA glycosylase TDG via the base excision repair pathway. Like DNA methyltransferases, Tet enzymes are important for embryonic development. We will examine the mechanism and biological significance of Tet-mediated 5mC oxidation in the context of pronuclear DNA demethylation in mouse early embryos. In contrast to its role in active demethylation in the germ cells and early embryo, a number of lines of evidence suggest that the intragenic 5hmC present in brain may act as a stable mark instead. This short review explores mechanistic aspects of TET oxidation activity, the impact Tet enzymes have on epigenome organization and their contribution to the regulation of early embryonic and neuronal development.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.723-727
• /
• 2004

Three kinds of $Si_3N_4$ powders (M-11, SN-ESP, and SN-E10) were gas-pressure sintered at $1700-1900^{\circ}C$ for 2 h under 18 atm $N_2$. Their densification behavior was investigated and compared as well as the mechanical properties and microstructure of the resulting ceramics. SN-ESP and SN-E10 started to reach nearly full densification at $1750^{\circ}C$ and showed almost no decomposition up to $1900^{\circ}C$. In contrast, M-11 was not fully densified until $1800^{\circ}C$ and showed about $3\%$ weigh loss at $1900^{\circ}C$ indicating poor thermal stability. SN-ESP and SN-E10 showed much higher strength both at room temperature and $1200^{\circ}C$ than M-11 when fully densified. Compared with SN-ESP, SN-E10 was not only a little better in strength (both at room temperature and $1200^{\circ}C$) and fracture toughness but also much higher in the Weibull modulus due to more interlocked microstructure by well elongated grains.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.5
• /
• pp.383-391
• /
• 1992

A comparative study of enzymatic properties between the trypsin from the cat-shark Cephaloscyllium umbratile ( C-T) and the two trypsins from the mackerel Scomber japonicus $(M-T_A\;and\;M-T_B)$ was carried out following after the previous paper(Pyeun et al., 1991). Trypsin from cat-shark(C-T) showed the higher heat stability compared to the others $(M-T_A\;and\;M-T_B)$ and its denaturation constant$(K_D)$ was $10.68\times10^{-4}\;sec^{-1}\;at\;55^{\circ}C$ with BA-p-NA substrate. The activation energies(Ea) of the trypsins measured at a temperature range from $30^{\circ}C\;to\;50^{\circ}C$ were estimated to be 4.07 kcal/mole for C-T, 11.61 kcal/mole for $M-T_A$, and 8.43kcal/mole for $M-T_B$, respectively. The Km values were $24.9\times10^{-5}\;M\;for\;C-T,\;5.37\times10^{-5}\;M\;for\;M-T_A,\;and\;9.65\times10^{-5}\;M\;for\;M-T_B$. On the other hand, the Ki values for TLCK and DFP determined by Dixon plot were $1.50\times10^{-6}\;M\;and\;9.28\times10^{-6}\;M\;for\;C-T\;2.86\times10^{-6}\;M\;and\;2.11\times10^{-4}\;M\;for\;M-T_A\;and\;3.90\times10^{-6}\;M\;and\;1.60\times10^{-4}\;M\;for\;M-T_B$ Similar amino acid profiles were showed between three trypsins each other, with few exceptions of $M-T_B$ containing higher amount of arginine, and the smaller amount of tryptophan in C-T than the others.

• Kyungpook Mathematical Journal
• /
• v.54 no.1
• /
• pp.11-22
• /
• 2014

The sequence spaces $c^F$(M), $c^F_0$(M) and ${\ell}^F$(M) of fuzzy real numbers with fuzzy metric are introduced. Some properties of these sequence spaces like solidness, symmetricity, convergence-free etc. are studied. We obtain some inclusion relations involving these sequence spaces.

• Journal of Plant Biology
• /
• v.32 no.1
• /
• pp.33-40
• /
• 1989

Polysomal polyadenylated mRNAs which were purified from pea leaves were fractionated by sucrose grandient sedimentation. Fractions corresponding to the peak at 11.5S were found to contain mostly mRNA encoding the precursor polypeptide to the small subunit of ribulose bisphosphate carboxylase (rbcS) by in vitro translation in wheat germ extract. Double-stranded cDNA which was synthesized from the 11.5S mRNA was cloned into Hind III site of plasmid pBR 325. A cDNA clone, H24, was identified to code for rbcS. In vitro translation product of the hybridization-selected mRNA was molecular weight 20,000, presumably the precursor of rbcS. The nucleotide sequences of the H24 showed almost complete homology with the sequences encoding the transit peptide of the rbcS-3A gene which was reported by Fluhr et al.(1986).

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2009

We report a successful fabrication of $high-J_c\;NdBa_2Cu_3O_{7-{\delta}}$ (NdBCO) films on $SrTiO_3$(STO) (100) substrates by pulsed laser deposition (PLD) in a relatively wide processing window. Under various oxygen pressures controlled by either 1%$O_2$/Ar mixture gas or pure $O_2$ gas, strongly c-axis oriented NdBCO films were grown at the substrate temperature $(T_s)\;of\;800^{\circ}C$ in 800 mTorr with 1%$O_2$/Ar gas and also in 400 and 800 mTorr with pure $O_2$ gas. These samples exhibited $T_c$ values over 90K and $J_c$ values of $2.8-3.5MA/cm^2$ at 77K in self-field (77K, sf). On the other hand, $J_c$ values over $1A/cm^2$ were obtained at the temperature regions of $700-830^{\circ}C$ in 800 mTorr with 1%$O_2$/Ar gas at those of $750-830^{\circ}C$ in 800 mTorr with pure $O_2$ gas. Unlike previous reports, resent results support that the PLD processing window for high-Jc NdBCO films is not narrow.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.5
• /
• pp.282-289
• /
• 2009

The effects of the high temperature gas nitriding (HTGN), tempering and subzero treatment of STD11 steel have been investigated. HTGN treatment was carried out at $1050^{\circ}C$, $1100^{\circ}C$ and $1150^{\circ}C$ for 1 hr. in an atmosphere of $1\;kg/cm^2$ nitrogen gas. Tempering and double-tempering were performed at $550^{\circ}C$ for 1 hr. The surface layer of HTGN-treated steel appeared the precipitates of $M_2N$, $M_7C_3$ and $M_{23}C_6$ in the matrix of austenite. However, the interior region exhibited martensite with the precipitation of carbides. The nitrogen content of the surface layer appeared ~1.35 wt.%, ~0.83 wt.% and ~0.56 wt.% at the HTGN treatment temperature of $1050^{\circ}C$, $1100^{\circ}C$ and $1150^{\circ}C$, respectively. The surface hardness of double-tempered and subzero-treated steel measured the maximum value of 828 Hv, 960 Hv, 750 HV after HTGN treatment at the $1050^{\circ}C$, $1100^{\circ}C$ and $1150^{\circ}C$, respectively. These hardness value increased above 230~420 Hv compared with the HTGN-treated steel due to the decrease in retained austenite and existence of fine precipitates.