• Transactions of the Korean hydrogen and new energy society
• /
• v.6 no.2
• /
• pp.53-63
• /
• 1995

A 100kW class stack consisting of 10 molten carbonate fuel cells has been fabricated. Internally manifold stack has been tested for endurance. Each cell in the stack had an electrode area of $100cm^2$ and reactant gases were distributed in each cells in a cross-flow configuration. Initial and long term operation performance of the stack was investgated as a function of gas utilization using a specially designed small scale stack test facility. It was possible to have a stack with an output of more than 100W using an anode gas of 72% $H_2/18%$ $CO_2/10%H_2O$ and cathode gas of 33% $O_2/67%$ $CO_2$ and 70% Air 30% $CO_2$. The output and voltage of the stack at a current 15A($150mA/cm^2$) and gas utilization of 0.4 showed 125.8W and 8.39V respectively by elapsed time of 310 hours operation. In long term operation characteristics, the voltage drop of 52.4mV/1000hour was observed after more than 1,840 hours operation. Among the voltage drop, the OCV loss was highest than other voltage loss such as internal resistance and electrode polarization. Non uniformity of 2voltages and degradation of cell voltage in the stack was observed in according to changing the utilization rate after a long term operation. Further work for increasing the performance prolonging the life of the stack are required.

• Korea journal of population studies
• /
• v.29 no.1
• /
• pp.133-156
• /
• 2006

This paper tries to explore the overall profile of Korean female labor force over the period of 1960-2000. A particular emphasis is put on portraying major over-time characteristics of female labor force, following five different political regimes--that of Park, J.H.(1960 and 1970s), of Chon D.H. (early and late 1980s), of Roh T.W. (late 1980-early 1990s), of Kim,Y.S. (early 1990-1ate 1990s), and of Kim. D. J. (late 1990-early 2000s), respectively. Discussions have centered around: 1) utilization of young single girls from rural areas during the early industrialization process of 1960-1985; 2) the beginning of married women's entry into labor market and issues of the socalled &M-curve& thesis in Korean experiences since 1990s; 3) the emergence and enlargement of non-regular workers; and 4) the launching of labor related legal measures such as the Equal Employment Act of 1988 and its successive revisions, the Maternity Leave Acts, the On-the-Job Chi1dcare Centers, and the prohibition of sexual harassments on the job setting, and so on. All in all, although it is undeniable that the Korean female labor force has experienced much progress over the period of time in terms of &equality and protection& issues, overall industrial reality we are facing with has not been so prosperous in the sense that most women workers have become the victims of industrial polarization, as time goes by.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.145-152
• /
• 2010

The gel polymer electrolyte(GPE) were prepared by in-situ thermal cross-linking reaction of homogeneous precursor solution of perfluorinated phosphate-based cross-linker and liquid electrolyte. Ionic conductivities and electrochemical properties of the prepared gel polymer electrolyte with the various contents of liquid electrolytes and perfluorinated organophosphate-based cross-linker were examined. The stable gel polymer electrolyte was obtained up to 97 wt% of the liquid electrolyte. Ionic conductivity and electrochemical properties of the gel polymer electrolytes with the various chain length of perfluorinated ethylene oxide and different content of liquid electrolytes were examined. The maximum ionic conductivity of liquid electrolyte was measured to be $1.02\;{\times}\;10^{-2}\;S/cm$ at $30^{\circ}C$ using the cross-linker($PFT_nGA$). The electrochemical stability of the gel polymer electrolyte was extended to 4.5 V. The electrochemical performances of test cells composed of the resulting gel polymer electrolyte were also studied to evaluate the applicability on the lithium polymer batteries. The test cell carried a discharge capacity of 136.11mAh/g at 0.1C. The discharge capacity was measured to be 91% at 2C rate. The discharge capacity decreased with increase of discharge rate which was due to the polarization. After 500th charge/discharge cycles, the capacity of battery decreased to be 70% of the initial capacity.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.279-294
• /
• 2004

This study described about a liquid crystalline technology that is used in cosmetics industry. Various intermediate phases may exist between solid and liquid. At high surfactant concentration, several liquid crystalline phases can be made to have formed. Although molecular arrangement with crystallization is not regular, it is known that more relative regular state is liquid crystalline or meso-phase than liquid phase. Usually, it described in detail about manufacturing method that explained about a kind of liquid crystalline technology in cosmetics, a new liquid crystalline technology, and makes liquid crystalline. Specialty, it introduced about kind of special an emulsifier to form liquid crystalline. There were hydrogenated lecithin, ceramide, dipalmitoylhydroxyproline, DEA-cetyl phosphate, Gemini-surfactant in representative raw material to form liquid crystalline. Liquid crystalline extent that used polarization microscope to observe formation, and appears best from 400times, 600times, 1,000times well appeared. Also, droplet particle size that liquid crystal is made best 1.0-10.0$\mu\textrm{m}$ be. General emulsion more than superior result that measures the skin moisturizing effect to take advantage of liquid crystalline technology of vitamin was seen. As presence at a clinical result, wave and general emulsion more than superior result (more than 20%) that measures skin moisturizing effect about liquid crystalline of vitamin B$\_$5/ were seen (ANOMA t-test, p<0.05)

• Molecules and Cells
• /
• v.47 no.3
• /
• pp.100007.1-100007.11
• /
• 2024

Recent evidence establishes a pivotal role for obesity-induced inflammation in precipitating insulin resistance and type-2 diabetes. Central to this process is the proinflammatory M1 adipose-tissue macrophages (ATMs) in epididymal white adipose tissue (eWAT). Notably, natural killer (NK) cells are a crucial regulator of ATMs since their cytokines induce ATM recruitment and M1 polarization. The importance of NK cells is shown by the strong increase in NK-cell numbers in eWAT, and by studies showing that removing and expanding NK cells respectively improve and worsen obesity-induced insulin resistance. It has been suggested that NK cells are activated by unknown ligands on obesity-stressed adipocytes that bind to NKp46 (encoded by Ncr1), which is an activating NK-cell receptor. This was supported by a study showing that NKp46-knockout mice have improved obesity-induced inflammation/insulin resistance. We therefore planned to use the NKp46-knockout mice to further elucidate the molecular mechanism by which NKp46 mediates eWAT NK-cell activation in obesity. We confirmed that obesity increased eWAT NKp46⁺ NK-cell numbers and NKp46 expression in wild-type mice and that NKp46-knockout ablated these responses. Unexpectedly, however, NKp46-knockout mice demonstrated insulin resistance similar to wild-type mice, as shown by fasting blood glucose/insulin levels and glucose/insulin tolerance tests. Obesityinduced increases in eWAT ATM numbers and proinflammatory gene expression were also similar. Thus, contrary to previously published results, NKp46 does not regulate obesity-induced insulin resistance. It is therefore unclear whether NKp46 participates in the development of obesity-induced inflammation and insulin resistance. This should be considered when elucidating the obesity-mediated molecular mechanisms that activate NK cells.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.588-593
• /
• 2022

Terephthalaldehyde (TPA) is introduced as a cross liker to enhance electron transfer of hemin-based cathodic catalyst consisting of polyethyleneimine (PEI), carbon nanotube (CNT) for hydrogen peroxide reduction reaction (HPRR). In the cyclic voltammetry (CV) test with 10 mM H₂O₂ in phosphate buffer solution (pH 7.4), the current density for HPRR of the suggested catalyst (CNT/PEI/hemin/PEI/TPA) shows 0.2813 mA cm^-2 (at 0.2 V vs. Ag/AgCl), which is 2.43 and 1.87 times of non-cross-linked (CNT/PEI/hemin/PEI) and conventional cross liker (glutaraldehyde, GA) used catalyst (CNT/PEI/hemin/PEI/GA), respectively. In the case of onset potential for HPRR, that of CNT/PEI/hemin/PEI/TPA is observed at 0.544 V, while those of CNT/PEI/hemin/PEI and CNT/PEI/hemin/PEI/GA are 0.511 and 0.471 V, respectively. These results indicate that TPA plays a role in facilitating electron transfer between the electrodes and substrates due to the π-conjugated cross-linking bonds, whereas conventional GA cross-linker increases the overpotential by interrupting electron and mass transfer. Electrochemical impedance spectroscopy (EIS) results also display the same tendency. The charge transfer resistance (R_ct) of CNT/PEI/hemin/PEI/TPA decreases about 6.2% from that of CNT/PEI/hemin/PEI, while CNT/PEI/hemin/PEI/GA shows the highest R_ct. The polarization curve using each catalyst also supports the superiority of TPA cross liker. The maximum power density of CNT/PEI/hemin/PEI/TPA (36.34±1.41 μWcm^-2) is significantly higher than those of CNT/PEI/hemin/PEI (27.87±0.95 μWcm^-2) and CNT/PEI/hemin/PEI/GA (25.57±1.32 μWcm^-2), demonstrating again that the cathode using TPA has the best performance in HPRR.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.29-33
• /
• 2004

In this paper, we took the basic experiment in order to explore the characteristics of optical CT(optical current transformer) for measuring high current in a superhigh voltage condition using faraday effect and wrote that. We used the 1,310[nm] Laser Diode for the source of light and PIN-Photodiode for receiver. The transmission line of light was composed of the single-mode fiber of 30[m] which could maintain the state of polarization in the optical fiber. The range of current was from 400[A] to 1300[A]. In addition, the temperature ranged from $20[^{\circ}C}]\;to\;50[^{\circ}C]$. In a same experiment condition, a power magnitude increases in proportion as input current is increasing and temperature become low. The maximum ratio of error in temperature of $50[^{\circ}C]$ appears 0.15[%] and the 0.16[%], 1.24[%] and 0.07[%] is ratio of error in respectively $40[^{\circ}C],\;30[^{\circ}C],\;and\;20[^{\circ}C]$.

• Korean Journal of Remote Sensing
• /
• v.23 no.2
• /
• pp.137-144
• /
• 2007

In KORDI (Korea Ocean Research and Development Institute), the KOSC (Korea Ocean Satellite Center) construction project is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI (Geostationary Ocean Color Imager) instrument which is loaded on COMS (Communication, Ocean and Meteorological Satellite); it will be launched in 2008. Ansan (the headquarter of KORDI) has been selected for the location of KOSC between 5 proposed sites, because it has the best condition to receive radio wave. The data acquisition system is classified into antenna and RF. Antenna is designed to be $\phi$ 9m cassegrain antenna which has 19.35 G/T$(dB/^{\circ}K)$ at 1.67GHz. RF module is divided into LNA (low noise amplifier) and down converter, those are designed to send only horizontal polarization to modem. The existing building is re-designed and arranged for the KOSC operation concept; computing room, board of electricity, data processing room, operation room. Hardware and network facilities have been designed to adapt for efficiency of each functions. The distribution system which is one of the most important systems will be constructed mainly on the internet. and it is also being considered constructing outer data distribution system as a web hosting service for offering received data to user less than an hour.

• Clinical and Experimental Pediatrics
• /
• v.49 no.9
• /
• pp.977-982
• /
• 2006

Purpose : There has been an increasing amount of literature concerning the association between Mycoplasma pneumoniae and asthma pathogenesis. Interleukin(IL)-6 stimulates the differentiation of monocytes, and can promote Th2 differentiation and simultaneously inhibit Th1 polarization. IL-8 is a potent chemoattractant and, it has been suggested, has a role in asthma pathogenesis. Nitric oxide (NO) synthesized by airway epithelium may be important in the regulation of airway inflammation and reactivity. Vascular endothelial growth factor(VEGF) has been reported to be a mediator of airway remodeling in asthma. We investigated the effects of M. pneumoniae on IL-6, IL-8, NO and VEGF production in human respiratory epithelial cells. Methods : A549 cells were cultured and inoculated with M. pneumoniae at a dose of 20 cfu/cell. After infection, the presence of M. pneumoniae in epithelial cell cultures was monitored by immunofluorescence and confirmed by polymerase chain reaction(PCR) detection. IL-6, IL-8 and VEGF were determined by an enzyme-linked immunosorbent assay and reverse transcriptase-polymerase chain reaction. NO was measured using the standard Griess reaction. Results : In A549 cells, M. pneumoniaeinduced IL-6, IL-8, NO and VEGF release in time-dependent manners. It also induced mRNA expression of IL-6, IL-8 and VEGF in similar manners. Conclusion : These observations suggest that M. pneumoniae might have a role in the pathogenesis of the allergic inflammation of bronchial asthma.

• Journal of the Korean Ceramic Society
• /
• v.43 no.2 s.285
• /
• pp.106-113
• /
• 2006

PMN-PZT films with thickness of $5\;{\mu}m$ were deposited on $Pt/Ti/SiO_2/Si$ substrate at room temperature using aerosol deposition process. The films showed fairly dense microstructure without any crack. XRD and TEM analysis revealed that the films consisted of randomly oriented nanocrystalline and amorphous phases. Post-annealing process was employed to induce crystallization and grain growth of the as-deposited films and to improve the electrical properties. The annealed film showed markedly improved electrical properties in comparison with as-deposited film. The film after annealing at $700^{\circ}C$ for 1h exhibited the best electrical properties. Dielectric constant $(\varepsilon_r)$, remanent polarization $(P_r)$ and piezoelectric constant $(d_{33})$ were 1050, $13\;{\mu}C/cm^2$ and 120 pC/N, respectively.