• Journal of Plant Biology
• /
• v.21 no.1_4
• /
• pp.13-21
• /
• 1978

The effect of cyclic-AMP on the induction of acid phosphatase activity in barley aleurone layers was examined. Tannic acid was used as a inhibitor. Decursinol and coumarin were also used as a comparison. Maxiumu promotion of the enzyme activity was obtained with 10-5M cyclic-AMP, but this promotion was lower than that of 10-5M GAS induced enzyme activity in incubation medium. The inhibition rate in the addition of tannic acid was shown 17% and 63% at a ratio to GAs (by weight) of 10 : 1, and 58% and 94% at a ratio of 100 : 1 treated with GAs, and cyclic-AMP, respectively. The most potentiation of 10-6M GAS effect was induced by the additiion of suboptimal concentration (10-6M) of cyclic-AMP. Additional GAs and cyclic-AMP were shown the recovery of the enzyme activity inhibited by tannic acid. The combination with cyclic-AMP and theophylline enhanced the enzyme activity, too. Any other nucleotides tested except cyclic-AMP didn't show the action. There were no differences in acid phosphatase isozyme patterns by polyacrylamide disc electrophoresis, in conjunction with the different additions but the size of bands showed great differences. Especially, the 3rd band and the 5th band group were remarkable.

• The Journal of the Korean life insurance medical association
• /
• v.16
• /
• pp.109-121
• /
• 1997

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.83.2-83.2
• /
• 2012

Type I AGNs are classified by the presence of broad emission lines while Type II AGNs show narrow emission lines only. All-sky surveys such as SDSS provide large AGN samples for statistical studies. However, the AGN samples suffer selection bias due to the incomplete selection criteria. To investigate the missing Type I AGNs in optical spectroscopic surveys, we start with a sample of SDSS Type II AGNs at 0.02 < z < 0.05, using the MPA-JHU SDSS DR7 catalog. We search for the hidden broad $H{\alpha}$ component with both visual inspection and the multi-component spectral decomposition method. Out of 1383 Type II AGNs, we find a total of 62 missing Type I AGNs (~4.5%). The sample has mean black hole mass, log $(M_{BH}/M_{SUN))=6.48{\pm}0.53$, and luminosity, log $(L_{H{\alpha}}/ergs^{-1})=40.52{\pm}0.33$, with Eddington ratio, log $(L_{bol}/L_{Edd})=-1.51{\pm}0.41$. We will describe the sample and present the $M_{BH}-{\sigma}_*$, and $M_{BH}-M_*$ relations of the sample in the context of the BH-galaxy coevolution.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.2
• /
• pp.110-116
• /
• 2009

The prominent advantages of Dual Material Surrounding Gate (DMSG) MOSFETs are higher speed, higher current drive, lower power consumption, enhanced short channel immunity and increased packing density, thus promising new opportunities for scaling and advanced design. In this Paper, we present Transconductance-to-drain current ratio and electric field distribution model for dual material surrounding gate (DMSGTs) MOSFETs. Transconductance-to-drain current ratio is a better criterion to access the performance of a device than the transconductance. This proposed model offers the basic designing guidance for dual material surrounding gate MOSFETs.

• Journal of Chest Surgery
• /
• v.29 no.8
• /
• pp.867-874
• /
• 1996

This study was designed to assess the left ventricular peak systolic pressure/end-systolic volume (PSP/ESV) ratio in predicting symptomatic improvement with valve replacement in patients with aortic regurgitation and enlarged left von'lrlcular volume. We studied 21 patients (15 men and 6 women aged 15 to 60 years) with moderate or severe aortic regur- gitation, no other cardiovascular abnormalities and left ventricular end-systolic volume over 60 m11m2. In this group we assessed the preoperative variables which routinely were measured at cardiac catheterlzation to predict symptomatic improvement with valve replacement. Six months after operation, symptoms were alleviated in 13 patients(62%), and unchanged in 8()8%). By multivariate analysis, the PSP/ESV rati was a strong predictor for functional class 6 months after surgery(p=0.005) and also for change- in functional class prior to an operation to 6 months postoperatively(p=0.0)2). By 6 months after receiving valve replacement, all patients with a ratio over 1. 71 mmHglml/m'were in functional class I or II , in contrast, of those with a ratio < 1.71 mmHg/ml/m2, 40% were in functional class III. The PSP/ESV ratio may help to predict which patients with aortic regurgitation and enlarged left ven- tricular end-systolic volume will have symptomatic improvement with valve replacement.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.6
• /
• pp.781-784
• /
• 2000

A study was conducted to examine the influence of maize (Zea mays) and cowpea (Vigna unguniculata) intercropping on fodder biomass production and silage characteristics. Maize fodder was cultivated alone and intercropped with cowpea at seed ratio of 85:15 and 70:30. Fodder was harvested at heading stage (at about 35% dry matter). The data indicated significant increase in biomass and crude protein production of maize intercropped with cowpea at seed ratio 70:30 followed by seed ratio 85:15 as compared to maize alone. However, no (p>0.05) difference was observed in TDN production among the three treatments. Four types of silages from, I) maize alone, II) maize and cowpea (85:15), III) maize and cowpea (70:30) and IV) maize supplemented with 2.5% urea were prepared. After 60 days of ensiling period, silage samples were analysed for proximate composition and fermentation characteristics. Crude protein and lactic acid values of silages I, II, III and IV were 8.52, 9.82, 14.90 and 13.96% and 9.00, 9.38, 10.86 and 7.43%; respectively. In situ dry matter digestibility was maximum in silage III followed by silages II, IV and I. The results suggested that intercropping of maize and cowpea at seed ratio 70:30 increased fodder production and produced quality silage.

• Journal of Mechanical Science and Technology
• /
• v.17 no.6
• /
• pp.879-887
• /
• 2003

The flow in a parallel walled test channel, when obstructed with a geometry at the entrance, can be forward, reverse and stagnant depending on the position of the obstruction. This interesting flow phenomenon has potential benefit in the control of energy and various flows in the process industry In this experiment, the flat plate obstruction geometry was used as an obstruction at the entry of the test channel. The parameters that influence the flow inside and around the test channel were the gap (g) between the test channel and the obstruction geometry, the length (L) of the test channel and the Reynolds number (Re). The effect of the gap to channel width ratio (g/w) on the magnitude of the velocity ratio (V$\_$i/ / V$\_$o/ : velocity inside/ velocity outside the test channel) was investigated for a range of Reynolds numbers. The maximum reverse flow observed was nearly 20% to 60% of the outside velocity for Reynolds number ranging from 1000 to 9000 at g/w ratio of 1.5. The maximum forward velocity inside the test channel was found 80% of the outside velocity at higher g/w ratio of 8. The effect of the test channel length on the velocity ratio was investigated for different g/w ratios and a fixed Reynolds number of 4000. The influence of the Reynolds number on the velocity ratio is also discussed and presented for different gap to width ratio (g/w). The flow visualisation photographs showing fluid motion inside and around the test channel are also presented and discussed.

• Geomechanics and Engineering
• /
• v.28 no.5
• /
• pp.463-475
• /
• 2022

In the mine exploitation stage; one of the critical issues is the stability assessment of post-pillars. The instability of post-pillars leads to serious safety hazards in mining operations. The focus of this study is to assess the stability of post-pillars in the 130# stope in the central ore body at Trepça hard rock mine by employing both conventional (i.e., critical span curve) and numerical methods (i.e., FLAC3D). Moreover, a new numerical based index (i.e., Pillar Yield Ratio-PYR) was proposed. The aim of PYR index is to determine a border line between stable, potentially unstable, and failure state of post-pillars at a specific mine site. The critical value of pillar width to height ratio is 2.5 for deep production stopes (e.g., > 800 m). Results showed that pillar size, mining height and mining depth significantly have affected the post-pillar stability. The reliability of numerical based index (i.e., PYR) is verified based on empirical underground pillar stability graph developed by Lunder, 1994. The proposed pillar yield ratio index and pillar stability graph can be used as a design tool in new mining areas at Trepça hard rock mine and for other situations with similar geotechnical conditions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.480-485
• /
• 2004

In this paper, a new predistortion linearizing method using frequency up-conversion operation of mixer is proposed. This linearizing method doesn't require any additional signal sources in spite of frequency up-conversion mixing operation. This method extracts the 2nd low frequency intermodulation distortion signal from input signals and uses the extracted 2nd low frequency intermodulation distortion signal as mixing signal source. To show validation of the proposed predistortion method, we made K-PCS power amplifier. On 2-tone signals amplification process, the (C/I) ratio of amplifier is improved 26 ㏈ (@Po=22 ㏈m/tone), where two tones are 1.8544 ㎓ and 1.8556 ㎓, respectively. And (C/I) ratio is improved more than to 20 ㏈ for 17 ㏈ output signal dynamic range. On IS-95A CDMA 1FA amplification process, the improvements of adjacent channel power ratio(ACPR) are 10.8 ㏈ and 6.4 ㏈ at ${\pm}$885 ㎑ and ${\pm}$1.25 ㎒ offset points, respectively.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1469-1471
• /
• 1994

This paper describes the structure and electrical characteristics of a shorted anode p-i-n switch. The device showed a significant improvement in the threshold voltage-to-holding voltage ratio, which is due to the suppression of the hole injection from the anode and to the gold gettering at the anode side. The shorted anode devices with a $100{\mu}m$ channel length have a threshold voltage of 300 volts and a holding voltage of 5.5 volts.