• Journal of the Korean Magnetics Society
• /
• v.27 no.2
• /
• pp.41-48
• /
• 2017

Recent study shows that ordered alloy of $L1_2$ $XPt_3$ (M = V, Cr, Mn, Co, and Fe) exhibits various magnetic phases such as ferromagnetic-to-antiferromagnetic transition at the $MnPt_3$ surface. Moreover, it has been argued that $CrPt_3$, in particular, possess large magnetocrystalline anisotropy and Kerr rotation with possible violation of Hund's rule. As such, we extend our work to thickness dependence of the magnetic structure of $CrPt_3$ thin film using density functional theory. Magnetic ground state of the bulk $CrPt_3$ turns out to be ferromagnetic (FM), where other magnetic phases such as A-type (A-AF), C-type (C-AF), and G-type antiferromagnetic (G-AF) state have higher total energies than FM by 0.517, 0.591, and 0.183 eV, respectively, and magnetic moments of Cr in bulk are respectively 2.807 (FM), 2.805 (A-AF), 2.794 (C-AF) and $2.869_{{\mu}_B}$ (G-AF). We extend our study to $CrPt_3$(001) thin films with CrPt-and Pt-termination. The thickness and surface-termination dependences of magnetism are investigated for 3-9 monolayers (ML), where different magnetic phases from bulk emerge: C-AF for CrPt-terminated 3 ML and G-AF for Pt-terminated 5 ML have energy difference relative to FM by 8 and 54 meV, respectively. Furthermore, thickness- and surface-termination-dependent magnetocrystalline anisotropies of the $CrPt_3$(001) films are discussed.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.80-88
• /
• 2014

This study was carried out to understand the effect of sowing date on growth characteristics, flower duration of a total of 6 domestic rapeseed cultivars, "Sunmang", "Tammiyuchae", "Tamlayuchae", "Naehanyuchae", "Yongsanyuchae" and "Hallayuchae" with different sowing dates (25 Sept., 5 Oct., 15 Oct., 25 Oct., 5 Nov.) in Muan, Jeollanamdo, Republic of Korea. The results obtained were summarized as the follows: The number of seedling stand after overwintering was decreased in all 6 cultivars. It changed little until 5 Oct., and then showed continuously largely decrease as the sowing date being delayed. As the sowing date was being delayed, plant height was decreased while Silique length and thousand seed weight were increased. Seed yield in all 6 cultivars decreased almost linearly with late sowing date. In correlation analysis between the delaying sowing date and growth characteristics, it was inversely correlated with plant height ($r=-0.769^{**}$), No. of branches/plant ($r=-0.760^{**}$), No. of siliqua/panicle ($r=-0.631^{**}$) and seed yield ($r=-0.946^{**}$), while showed a positive correlation with silique length (r=0.635), seed diameter ($r=0.629^{**}$) and thousand grain weight ($r=0.422^*$). No. of seeds/silique and seed set percentage were not significantly correlated with the delaying sowing date. The flower duration was long in order of Sunmang, Tammiyuchae, Yongsanyuchae, Naehanyuchae, Hallayuchae and Tamlayuchae. Varietal variation of flowering date was larger with early sowing date than with delaying sowing date. The range of flower duration across all cultivars was from 1 day of Tamlayuchae to 14 days of Sunmang according to the sowing date, and the end flowering date was able to be extended from 2 to 9 days, compared to normal date of end flowering.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.763-771
• /
• 2012

In this study, total antioxidant properties of extracts from different parts of Lespedeza bicolor were determined using techniques of measuring 1,1-diphenyl-2-picryl hydrazyl/2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)-radical scavenging activity and total phenolic contents. The total antioxidant activities of leaf, stem and root extracts from various solvents (water, 50, 70, 100% ethanol, and hot-water) indicated that 50 and 70% ethanol extracts have high radical scavenging activities and phenolic contents. A systematic approach was used to determine the total antioxidant activity of different solvent fractions of the Lespedeza bicolor extracts, partitioning with chloroform, ethyl acetate, n-butanol, and water, and the ethyl acetate fraction was found to have the strongest antioxidant activity. Antioxidant assay-guided isolation was carried out to isolate potential antioxidant compounds. The ethyl acetate fraction of the leaf extract was subjected to silica gel, LH-20 and RP-18 column chromatography successively, and afforded compound 1, which was identified as eriodictyol by NMR and MS analysis, after which its antioxidant activity was determined.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.50-56
• /
• 2009

This study was carried out to determine the optimum extraction conditions for Ishige okamurai by comparing the yields, total phenolic compound content (TPC), and antioxidant properties of its 95%, 70%, 50% fermented ethyl alcohol and water extracts. Additionally, the effects of heat and pH treatments on the antioxidant properties of the extracts were evaluated by their TPC and 1,1-diphenyl-2-picrylhydrazyl(DPPH) radical scavenging capabilities. The yields of the extracts were greatest in the order of water > 50% > 70% > 95% fermented ethyl alcohol, and the TPC of the 70% (26.18%) and 50% fermented ethyl alcohol (27.56%) extracts were higher than those of the others. However, in terms of DPPH radical scavenging and ferrous-reducing power, the 70% fermented ethyl alcohol extract of Ishige okamurai showed the highest antioxidant effects. Additionally, in the results for the heat and pH treatments, the antioxidant properties of the 70% fermented ethyl alcohol extract were not influenced by the treatment conditions except at pH 10.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.51-59
• /
• 1994

This study was carried out to investigate the optimal propagation condition through stem node tissue culture of yam supplemented with concentration levels of growth regulators and activated charcoal in 1 /8MS white media. For shoot induction and plant regeneration from yam stem node tissue wre more effectivein combination of auxin, kinetin and activated charcoal than combination of auxin and kinetin. Shoot induction and plant regeneration were more effective in 1/8 medium suplemented with 1AA $2mg\;/\;\ell,\;kinetin\;2mg\;/\;\ell$ and activated charcoal $1g\;/\;\ell$ than in white medium, but in case of white medium, Shoot induction and plant regeneration wre effective in culture medium supplemented with NAAa $4mg\;/\;\ell,\;kinetin\;2mg\;/\;\ell$ and activated charcoal $1g\;/\;\ell$. Growth status in optimal propagation condition from yam stem node tissue brought the results of multiple plant, elongated plant height and increase in number of leaves and roots, but tissue culture effect by kinds of media in number of multiple plant were more effective in 1 /8MS medium than in white medium.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.11
• /
• pp.1589-1594
• /
• 2016

Piperine [(E,E)-5-(3,4-methtylenedioxyphenyl)-2,4-pentadienolypiperidide] is a principal of Piperaceae, including Piper nigrum L. and Piper longum Linn., which has been used as a spice and traditional medicine. In this study, we investigated whether or not piperine has anti-cancer effects on AGS human gastric cancer cells. The results demonstrated that piperine not only inhibited proliferation using MTT assay but also induced apoptotic bodies using DAPI assay in a dose-dependent manner in response to piperine. Expression levels of p53, Bax (pro-apoptotic), cleaved caspase-9, and cleaved-PARP increased, whereas expression levels of Bcl-2, XIAP (anti-apoptotic), and Akt decreased in a dose-dependent manner compared with the control by western blotting analysis. To identify the connection between phospo-Akt and Bcl-2 family in response to piperine, LY249002 (Akt inhibitor) was treated with piperine ($150{\mu}M$). The results were shown that expression of phospo-Akt was reduced whereas expression of Bax and cleaved-PARP increased in a dose-dependent manner. These results indicate that piperine induced apoptosis in AGS cells and may serve as a chemopreventive or therapeutic agent for human gastric cancer.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.1
• /
• pp.67-75
• /
• 1987

The major objectives of this study were to find out the growth and yield of two ecotypes of Korean garlic in main garlic producing districts in Korea. The data were collected by the field survey which had been conducted at 270 township in 58 major garlic production countries throughout the country on 10th, 20th, and 30th day of every month from 1982 to 1984. The results of this study were as follow: 1) Sowing period of garlic of southern and northern ecotype were around September 20 and October 20, respectively. 2) Average number of plants per $3.3m^2$ of the southern and northern ecotype were 123 and 100, respectively. 3) Leaf emergence time of southern ecotype was before the beginning of winter (November) and that of northern ecotype was from early February till April. 4) Stepwise multiple regression analysis showed that the plant heights measured on November 30 for southern ecotype and on June 30 for northern ecotype most adequately predicted the yield of garlic. The relationship between yield and plant height were as follows: Southern ecotype; Y=571.56+5.34X Northern ecotype; Y=251.81+5.45X where Y is yield expressed in Kg/l0a and X is height in cm at the respective date. 5) The number of leaves increased until harvest in both ecotypes. At harvest, the number of leaves in southern and northern ecotype were 10 and 8, respectively. Number of leaves counted on January 20 for southern ecotype and on June 20 for northern ecotype correlated best with the yield of the ecotypes. 6) The highest senescent portion of southern ecotype and northern ecotype were seen on January 30 and May 30, respectively. Stepwise multiple regression analysis showed that the senescent portion of southern ecotype counted on January 30 and that of northern ecotype on June 20 mostly affected the yield. 7) Average yield of southern and northern ecotype at the main garlic producing districts were 771 and 652Kg/10a, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• The Korean Journal of Physiology
• /
• v.2 no.2
• /
• pp.21-31
• /
• 1968

The appearance rates of antipyrine and urea into cerebrospinal fluid from blood were studied in the rabbits which were in the state of hypotension and of high permeability in the capillary beds following injection of histamine. The alteration in the distribution of electrolytes among various compartments of the brain and the permeability characteristics in the blood-cerebrospinal fluid barrier were also observed. Adult male rabbits, weighing around 2 kg, were used. Twenty four rabbits were divided into 3 groups. Besides the control group, histamine treated rabbits were categorized into 2 groups. $H_1$ consisted of the rabbits showing moderate responses to histamine and ranging from 62 to 80 mmHg in their mean anterial blood pressure. The animals which belong to $H_2-group$ showed severe responses to histamine and the mean anterial blood pressures dropped to 30-50 mmHg. Animals were anesthetized with nembutal, 30mg/kg i.v. The mean arterial blood pressure was read by means of the mercury manometer connected to the femoral artery. The animals, treated with histamine, were kept in hypotensive state at least for 40 minutes before the administration of the test-substances. The test-substances, 300 mg of urea and 200 mg of antipyrine, were dissolved in 3 ml of distilled water and were injected into the ear vein of the rabbit. After 10 minutes elapsed arterial blood sample was taken from the femoral artery and cerebrospinal fluid from the cisterna magna. Brain tissues were also analysed with respect to electrolytes in order to observe the disturbances in the electrolytes balance as well as in the function of the central nervous system. The results obtained were as follow: 1. The ratio of antipyrine concentration in cerebrospinal fluid to that of arterial blood plasma, that was the distribution ratio, was close to unity, revealing a well established equilibrium between the compartments of blood and cerebrospinal fluid in 10 minutes. In other words, there was no diffusion barrier with regard to antipyrine. The ratios over unity which were frequently seen in the histamine treated animals were attributable to the early penetration of the substance into the cerebrospinal fluid. 2. The appearance rates of urea into the cerebrospinal fluid in the histamine treated rabbits were higher in comparison with those of in the control animals. The increasing tendency in the rates was particularly remarkable in the $H_2-group$, showing the enhanced penetration of urea across the boondary. 3. In the htisamine treated $H_2-group$ the concentration of potassium in the blood plasma and cerebrospinal fluid well exceeded the control values and showed 8.5 and 9.0 mEq/l in average, respectively. Simultaneous drops in the brain tissue water were noticed, suggesting the leakage of intracellular potassium. 4. There was a coincidence in the rising pattern of potassium in the blood plasma and in the cerebrospinal fluid of $H_2-group$ and at least partial removal of the blood-cerebrospinal fluid barrier with respect to potassium was suggested in these animals. 5. The concentration of sodium in the blood plasma or in the cerebrospinal fluid showed no significant changes following histamine injection. However, sodium in the brain tissue revealed slight elevation in the histamine treated groups. 6. The ratios of the concentrations of potassium to those of sodium, [K]/[Na] in the brain tissues, were 1.92 in the control 1.82 in the $H_1$ and 1.52 in the $H_2-group$, respectively. The marked drop in the $H_2-group$ might represent neural dysfunction in the extremely hypotensive rabbits.