• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.273-279
• /
• 2000

Until recently performance requirements for automatic transmission fluids have continued to change to reflect the design changes of automatic transmission. The major purpose for these design changes is to improve the fuel economy and easy driving. To meet recent performance requirements fur automatic transmission the needs for special base oils Bike API Group III and IV base oils become larger. In this paper to evaluate the effects of base oils on performance of automatic transmission fluids formulated with API Group I,II,III and IV and Dexron III and Hereon Type additive package, Brookfield viscosity, oxidation test, SAE No.2 friction test and seal compatibility test were examined. From the test we knew that the use of Croup III and IV base oils in ATF has several benefits in low temperature viscosity, oxidation stability and SAE No.2 friction characteristics.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1994.06a
• /
• pp.21-27
• /
• 1994

본 연구에서는 대형 틸팅패드 저어널베어링의 성능에 관한 보다 정확한 설계 자료를 제시하기 위해서 선단압력을 고려한 이론해석을 수행하여 선단압력이동 베어링의 THD 성능에 미치는 영향을 제시하고자 한다. 그리고, 이론해석 결과와 실험 결과를 비교하여 이론해석 결과의 타당성을 제시하고자 한다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06b
• /
• pp.1-3
• /
• 1995

Aspects of the current trend in lubricants and future challenges are discussed. The discussion highlights key enviromnental issues regarding to resource conservation, toxicological consideration and environmental acceptability. Also highlighted are base stocks trends relative to hydroprocessed stocks (HVI, VHQ and XHQ), synthetic base stocks (PAO and organic esters) and biodegradable fluids (vegetable oils and special esters). Equipment severity and lubricant performance quality are briefly described.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.19-23
• /
• 2000

Stiction is an undesirable phenomenon that can be encountered often in Micro-Electro Mechanical Systems (MEMS) applications, In order to minimize this effect, Self-Assembled Monolayers (SAM) are commonly used. In this work the frictional characteristics of SAM are investigated using both micro-tribotester and SPM. It was found that the performance of SAM is quite sensitive to coating condition. The experimental results show promise for SAM to be used in sliding applications of micro systems.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.219-226
• /
• 2000

Frictional performance of ring pack in internal engine is investigated by varying spatial dimensions of ring pack and operating speed. This investigation is performed with commercial software by Ricardo Consultant Engineers, Inc. which is now in wofdwide use in automobile industries. Among the ring performances, blow-by rate, axial ring motions and frictional behaviors of top and second rings are studies in our work.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.243-244
• /
• 2002

New type slider with optical components is coming on market for portable and high capacity drive, and it shows great potential in future high performance drive. It is very important that a slider should have a good dynamic behavior. In this paper the dynamic behavior and static characteristics of slider have been investigated numerically by in-house simulation code using FEM.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.1-9
• /
• 1982

자동차에서 윤활을 필요로 하는 부분으로서는 엔진과, 차체 그리고 변속 및 주형장치로 대별되며 엔진만의 윤활을 위해서는 엔진유가 필요하고 차체나 변속 주형장치는 그리이스 및 기어유가 사용된다. 특히 자동차윤활에서 가장 가혹한 조건으로 윤활되고 또한윤활문제로 고심하는 엔진 윤활은 엔진의 구조나 윤활방식 또는 사용연료등엥 따라 윤활상태가 크게 달라질 수도 있으나 윤활이 기본원리와 목적은 대동소이하다. 자동차엔진, 특히 가솔린엔진에서 윤활을 필요로 하는 부분은 베어링, 실린더 및 캠부분등으로 나눌 수가 있으며 이런 부분의 윤활은 극히 가혹한 상태에 놓이게 된다. 따라서 이와 같은 문제들을 고려하면서 가솔린엔진윤활의 제문제점과 엔 진유에 요구되는 성능에 대하여 고찰하여 보고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.3
• /
• pp.337-342
• /
• 1998

In this paper the lubrication performances of line pivoted pad thrust bearing and point pivoted pad thrust bearing are studied by a numerical analysis. The running characteristic parameters such as nondimensional load carrying capacity nondimensional friciton power loss nondimensional flow rate and film thickness ratios are calculated for various circumferential pivot positions. The results provide a usdful data for the selection of pivot position in a pivoted and thrust bearing.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.232-232
• /
• 2004

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.10a
• /
• pp.195-201
• /
• 1996

The dynamic characteristics of externally pressurized journal bearing have been studied theoretically. The Reynolds' equation has been solved by FDM, and the dynamic coefficients have been calculated by using perturbation method. The bearing is compensated by orifice or double-pad diaphragm control valve. The effects of diaphragm initial gap and stiffness are considered. As the results of analysis, it is shown that a control valve has better performance than orifice.