• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.21-31
• /
• 2018

This study aimed to investigate the correlation between the inclinations of the incisors and lips in mixed dentition aged 7 - 11 years. Lateral cephalometric radiographs of 353 children were analyzed to measure the upper incisor inclination, lower incisor inclination, lower-nasolabial angle, and mentolabial angle in relation to the skeletal malocclusion classification. The measurements were then assessed using the Kruskal-Wallis test, Pearson correlation, and multiple regression analysis. There were significant negative correlations between the inclination of the upper incisors and lower-nasolabial angle in all classes of skeletal malocclusion. There was a negative correlation between the inclination of the lower incisors and mentolabial angle; however, class II malocclusion had a significant positive correlation. This study identified the factors that affect lip inclination and verified their associations.

• The Journal of the Korean dental association
• /
• v.9 no.6
• /
• pp.293-296
• /
• 1971

Histochemical observations on the effect of gold alloys crown margin in the periodontal membrane were caried out by use of rabbits. The animal were setted with gold alloys crown on the incisor teeth. The cervical margins were given extence into gingival sockets. The animals were sacrificed at the 30 days experimented period. Specimens of tissue were obtained from the mandibular incisor teeth with jaw. All tissues were fixed immediately in 10% neutral formalin solution. Different histochemical staining methods for the determination of fibrous components were the Mallory-Heidenhain Bielschowsky-Gomori, Gomori's aldehyde fuchsin. Periodic acid-Schiff reaction and Hematoxylin eosin stanin method. The results were as follows. The periodontal membrane is composed primarily of collagenous fibers and fibrous component run functional arrangement but in lower gold content groups, horizontal fiber groups were irregularly run. Elastic fibers were obligue run in experimental groups. There were no significant differences in reticularfibers in distribution.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.9 no.2
• /
• pp.103-106
• /
• 2013

The lower labial frenum attached to the free gingival margin can promote local tension, resulting in tissue ischemia, promoting the development of gingival recession, as well as complicating oral hygiene, resulting in chronic inflammation. In this case, early diagnosis and surgical treatment is recommended. This is the case about surgical treatment of heavy mandibular labial frenum in pre-school child with a history of syndactyly surgery. A 5-year-old girl visited the clinic with the chief complaint of high labial frenum of the mandible. Hyperplastic lower labial frenum was attached to the free gingival margin on the primary mandibular lateral incisor area. After fifteen month follow-up, right after the eruption of the permanent lower right lateral incisor, 6 years old patient received lower labial frenectomy to prevent periodontal diseases in permanent teeth and to reestablish normal anatomic characteristics. After 2 years of follow-ups, there were no marked complications.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.533-541
• /
• 1993

This study was designed to help to be given esthetics in construction of denture and prosthodontic rehabilitation of anterior tooth region. The author took the facial straight photograph of 100 old aged people(male 50, female 50) above 55 years of age, who have natural teeth in anterior tooth region, in a resting and a smiling position. And the author measured and analyzed the lip shape, the relation between the lip and the teeth and the change of lip length and height when they were smiling. The results of this study were as follows : 1. In the shape of the upper lip, when the upper lip curved downward, it was 53%, straight was 28% and curved upward was 9%. 2. In the relation between the upper lip and the teeth, average smile was 53% , high smile was 26% and low smile was 21%. 3. In the parallel relation between the lower lip and maxillary anterior incisal curvature, the group of straight was 54%, the group of parallel was 40% and the group of reverse was 6%. 4. In the relationship between maxillary anterior incisor and lower lip, the group of not-touching was 92%, the group of touching was 5% and the group of the maxillary anterior incisor were slightly covered by the lower lip was 3%. 5. In the teeth displayed in a smile, displayed to second premolar was 50%, displayed to first molar was 34%, displayed to first premolar was 12%, and displayed to canine and second molar were 2%. 6. At smiling, the width of the mouth was 0.94 times of the interpupillary distance and 0.45 times of the full face width. 7. At smiling, the length of the upper lip was 0.73 times and lower lip was 0.98 times of the length in a resting postion and the width of the mouth corner was 1.19 times of the resting position.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.937-946
• /
• 1998

The patient with an anterior open bite has one of the most difficult orthodontic problem to correct. Previous studies have yielded different conclusions as to exactly where the morphologic problems associated with vertical dysplasia-high angle cases are located. In order to identify the cephalometric features of high angle cases and highlight the measurements that characterize high angle cases, 109 pretreatment cephalograms, 35 high angle, 37 average angle, and 37 low angle cases, were analyzed and compared statistically. As the mandibular plane was steeper, the anterior facial height, especially lower anterior facial height, became greater, and the posterior facial height became smaller. All the dentoalveolar vertical dimensions, especially in upper, increased. And all the skeletal angular measurements increased. Especially Lower genial angle had most positive correlation to mandibular Plane angle. Upper incisor was lingually inclined, and lower incisor was labially inclined in high angle cases.

• Journal of Periodontal and Implant Science
• /
• v.38 no.2
• /
• pp.215-224
• /
• 2008

Purpose: These case reports show the orthodontic treatment of lower anterior incisors with gingival recession. Materials and Methods: Three cases were treated by an orthodontist and a periodontist. Each case had lingually tilted lower anterior incisors, anterior crossbite and skeletal Cl III pattern. Results: A variety of etiological factors were thought to cause gingival recession: aging, oral hygiene, tooth malpositioning, occlusal trauma. Conclusion: Due to the interaction among many possible contributing factors, it is difficult to predict whether further gingival recession may occur at a given site. The position and the movement of the lower anterior incisors with gingival recession are important factors in diagnosis and orthodontic treatment planning.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.203-212
• /
• 2013

The tooth morphology and qualitative mineral contents on enamel surface using energy dispersive X-ray spectroscopy, (EDX) were examined in the white-toothed shrew (genus Crocidura ) Crocidura lasiura and C. suaveolens and the red-toothed shrew (genus Sorex) Sorex caecutiens. In the case of C. lasiura and C. suaveolens, dental formula was found I 3/1 C1/1 P1/1 M3/3=28. The upper 1st and 2nd molars had an unequal W-shape formed by 5 cusps on the crown. The 3rd molar was found one-third the size of those of 1st and 2nd molars. The upper 1st incisor had two different sized hook-shapes and the lower 1st incisor was even. In the case of S. caecutiens, dental formula was found to be I3/1 C1/1 P3/1 M3/3=32. The upper 1st and 2nd molars had an equal W-shape on crown. The upper 3rd molar was half the size of those of the other molars. The upper 1st incisor possessed two similar sized hook-shapes and the lower 1st incisor had an uneven and serrated form. A comparison with the dental and cranial measurements revealed C. lasiura to be the largest of the three species (p<0.001) and C. suaveolens and S. caecutiens were similar in size (p>0.05). A qualitative analysis of mineral contents on enamel surface of the lower 1st incisor and lower 1st molar using EDX revealed C, O, P, Ca and Cu in all specimens and Pb was detected in several enamel specimens. No significant differences in the mineral contents (% weight) were observed among the three species (p>0.05). Fe was only detected on enamel surface of S. caecutiens with red pigmented teeth. Therefore, Fe is responsible for the red tip of the teeth. These results suggest that tooth morphological characteristics including the color of the tooth tip might be used as the key classifying species belonging to Crocidura and Sorex.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.209-219
• /
• 1997

This investigation was designed to analyze the degree of dental compensation according to horizontal components of craniofacial skeleton and to investigate correlation between dental compensation and craniofacial pattern in skeletal class III malocclusion. The material selected for this study consisted of standard lateral cephalogram of 59 subjects in normal occlusion group, 91 subjects in mild skeletal class III malocclusion group and 58 subjects in severe skeletal class III malocclusion group. The mild skeletal class III malocclusion group was divided into two groups, one was class III malocclusion without anterior crossbite group and the other was class III malocclusion with anterior crossbite group. The data were analyzed by Quick-ceph image program. The results were as follows. 1. Mild skeletal class III malocclusion without anterior crossbite group showed the most labial inclination of upper incisors, followed by severe skeletal class III malocclusion group and mild skeletal class III malocclusion with anterior crossbite group, the Latter showing the least. The amount of lingual inclination of lower incisors was the largest in severe skeletal class III malocclusion group, and there was no statistically significant difference between mild skeletal claw III malocclusion without anterior crossbite group and mild skeletal class III malocclusion with anterior crossbite group. 2. There were little differences in vertical skeletal structure between mild skeletal class III malocclusion without anterior crossbite group and mild skeletal class III malocclusion with anterior cwssbite group, they showed statistically significant differences in the upper incisors measurements. 3. The measurements of lower incisors in mild skeletal class III malocclusion without anterior crossbite group and upper incisors in mild skeletal class III malocclusion with anterior crossbite group represented a high correlation with skeletal structure. Especially, ∠IMPA and ∠FMIA of lower incisor measurements, and ∠U1-FH ∠U1-SN of upper incisor measurements showed high correlation with skeletal structure in each group. 4. ∠IMPA and ∠FMIA of lower incisor measurements showed high correlation with skeletal structure in all groups. ∠U1-FH, ∠U1-SN and U1-facial plane(mm) of upper incisor measurements represented higher correlation with skeletal structure than any other upper incisor measurements.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.5
• /
• pp.271-275
• /
• 2012

Objectives: This study evaluated a range of fixation methods to determine which is best for the postoperative stabilization of a mandibular osteotomy using three-dimensional finite element analysis of the stress distribution on the plate, screw and surrounding bone and displacement of the lower incisors. Materials and Methods: The model was generated using the synthetic skull scan data, and the surface model was changed to a solid model using software. Bilateral sagittal split ramus osteotomy was performed using the program, and 8 different types of fixation methods were evaluated. A vertical load of 10 N was applied to the occlusal surface of the first molar. Results: In the case of bicortical screws, von-Mises stress on the screws and screw hole and deflection of the lower central incisor were minimal in type 2 (inverted L pattern with 3 bicortical repositioning screws). In the case of plates, von-Mises stress was minimal in type 8 (fixation 5 mm above the inferior border of the mandible with 1 metal plate and 4 monocortical screws), and deflection of the lower central incisor was minimal in types 6 (fixation 5 mm below the superior border of the mandible with 1 metal plate and 4 monocortical screws) and 7 (fixation 12 mm below the superior border of the mandible with 1 metal plate and 4 monocortical screws). Conclusion: Types 2 and 6 fixation methods provide better stability than the others.

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.313-325
• /
• 2002

Three-dimensional CT imaging is efficient in examining specific structures in the craniofacial area by reproducing actual measurements through minimization of errors from patient movement and image magnification. Due to the rapid development of digital image technology and the expansion of treatment range a need for developing three -dimensional analysis has become urgent. Therefore the purpose of this study was to evaluate the percentage of error and magnification of three-dimensional CT using a dried skull and Vworks $program^{TM}$ (Cybermed Inc., Seoul, Korea) and also to obtain landmarks that are easy to designate and reproduce in three-dimensional images using the Vmorph-proto $program^{TM}$ (Cybermed Inc., Seoul, Korea). The following conclusions were obtained, 1. In the comparison of actual measurements from the dried skull and the three-dimensional image obtained from the Vworks program, the mean error was 0.99mm and the magnification was 1.04%. 2. Clinically useful hard tissue landmarks from three-dimensional images were Supraorbitale, Lateral orbital margin, Infraorbitale, Nasion, ANS, A point, Zygomaticomaxilla, Upper incisor, Lower incisor, B point, pogonion, Menton, PNS, Condylar inner margin, Condylar outer margin, Porion, Condylion, Gonionl, Gonion2, Gonion3, Sigmoid notch and Basion. 3. Clinically useful soft tissue landmarks from three-dimensional images were Endocanthion, Exocanthion, Soft tissue Nasion, Pronasale, Alare lateralis, Upper nostril point, Lower nostril point, Subnasale, Upper lip point, Cheilion, Stomion, Lower lip center, Soft tissue B, Pogonion, Menton and Preaurale. The Vworks program can be considered a clinically efficient tool to produce and measure three-dimensional images. Most of the hard and soft tissue landmarks proposed above are anatomically important points which are also easily reproducible and designated. These landmarks can be beneficial in three-dimensional diagnosis and the prediction of changes before and after surgery.