• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.52-59
• /
• 2013

In this study, strength and durability are investigated using structural and vibration analyses on models 1 and 2 of a press in common use. Model 1 has a structure in which a punch is applied from the upper part to the lower part; however, model 2 a structure in which a punch is applied from the lower part to the upper part. Maximum displacements of models 1 and 2 are 0.018184 mm and 0.025498 mm, respectively. Maximum equivalent stresses of models 1 and 2 are 14.144 MPa and 18.58 MPa respectively. Maximum displacements are shown for the punches of both models; model 1 has less deformation than model 2. Model 1 has more durability than model 2, as determined by an investigation of the structural strength. Using natural frequency analysis, model 1 was found to have maximum deformation in the upper part of punch. Mode1 2 has its maximum deformation in the column part of the body and the upper part of the fixed pin. Using harmonic stress analysis, the maximum deformations were found on the punch part and column part of the body in the cases of models 1 and 2, respectively. As the maximum total deformation and equivalent stress in the case of model 2 are shown to become 40 times those values of model 1, the vibration durability of model 2 can be seen to be weaker than that of model 1.

• Korean Journal of Acupuncture
• /
• v.25 no.4
• /
• pp.1-15
• /
• 2008

Objectives : This study is designed to investigate the association between Samcho-gyeong(TE) and the lower branch of Meridian system. Methods : The base of the study was established by searching for the historic conception of Samcho. Thereafter the meaning of lower correlation was considered and the property of lower part of Samcho Meridian system studied. Results : Samcho is a kind of Yug-Bu(Six hollow viscera, 六腑). It is a functional internal organ, which has been continuously controversial in history. It covers wide range of the internal organs and plays various kinds of roles. Samcho and Simpo lack in interrelation of obverse and reverse. The conception of Sanghap(Upper correlation, 上合) in Naegyeong supplements the deficiency. To establish the conception of Sanghap between Yug-Bu and Hand meridians, there should be established the conception of Hahap(Lower correlation, 下合) between Yug-Bu and foot meridians for treating lower parts. The existence of Hahaphyeol(Lower confluent points, 下合穴) reveals that there were a lot of limits in treating JungHa-cho(Middle and Lower energizers, 中下焦) diseases only with the acupoints of the Hand meridians. Jogsamcho(Triple energizer of foot, 足三焦) meridian written in Taeso(太素), corresponds to the lower leg, and it is believed that it engages in treating diseases in the trunk of the body and Hacho(Lower energizer, 下焦). Conclusions : Therefore, it is believed that the lower part of meridian of Samcho can deal with the symptoms of lower back pain, leg pain, bladder disease, and so on. This study is meaningful in that it expands the range of treatment in acupoints of the regular meridians.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.6
• /
• pp.73-77
• /
• 2009

Two different aquifers with different characteristics developed in the study area - a lower and upper aquifer zone. Nitrate contamination of the lower aquifer zone was likely due to infiltration of nitrate-contaminated groundwater of the upper aquier zone through abandoned groundwater wells. In order to evaluate the feasibility of a preliminary packer designed to prevent nitrate migration through abandoned groundwater wells NO3-N concentrations of the upper and lower part of preliminary packer installed at four sampling sites were measured. Nitrate concentrations of the and lower part of Yechun sinwolri were 10.3 mg/L and 5.0 mg/L, respectively. Yechun eosinri, Yechun jeowooriis, and Andong hoegokri were $NO_3$-N concentrations in the upper (11.3, 11.0, and 14.6 mg/L) and lower (8.8, 1.6, and 8.0 mg/L), respectively. $NO_3$-N contents of all groundwater samples in the lower part after the preliminary packer installation showed 22~85% lower than those of the upper part.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.1
• /
• pp.25-38
• /
• 2017

To investigate the characteristics of sand sediment topography in the Yeonggwang coastal area of Chonnam and to collect evidence of the past extreme events causing coastal flooding, three sites were surveyed among the sediments of Baeksoo-eup Hassari. In this study, the changes of particle characteristics, chemical composition, and the age of deposition of sediments were investigated. The sediments near Baeksoonam Elementary School at the elevation of 10m near the paleo-coastline are estimated to have been deposited at about 3,400 years ago and the grain size of the upper part of the sandy layer is in the range of $2.47-2.11{\varphi}$. The burial age of the sediment layer at Sadeung junction(BSN-B) was about 100 years. Considering the distance from the current coastline, the sands forming the dune are estimated to have been moved or deposited from the nearby area or the other dune on the front side. The mean grain size is observed to be fining upward. Especially, the mean of the upper part is about $2.3{\varphi}$, which is similar to other survey points. The averaged grain size of the lower part of the BSNC (Hasari-1 Gu) was $2.196{\varphi}$ and the upper part was $2.16{\varphi}$. The sorting showed that the upper part was slightly poorer than the lower, and it was difficult to specify the change of the environment. The burial age of the lower layer, which contains shells, was about 300 years. Considering previous studies, this shell layer is presumed to have formed by coastal flooding, such as a storm surge.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.8 no.1
• /
• pp.17-21
• /
• 1978

The study was to analyze on the hard and soft tissue profiles in mixed dentition. The subject consisted of 100 males and 100 females from 9 to 12 years of age and with a normal occlusion and acceptable profiles. On the basis of SnH line and SnV line, the author traced all the cephalograms and calculated the mean value and standard deviation in each measuring category and evaluated the sexual difference, the proper limit of development. The obtained results were as follows; 1. Individual variations of the lower facial part were larger the upper facial part in depth and height. 2. Sexual difference of lower facial part was significant in depth and height. 3. All the measured values to the SnH and SnV line were larger in male than in female but revealed resemblance in the profilogram. 4. The measured values of the region of nose, upper lip and point A showed stable tendency.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.40-45
• /
• 2009

This study is analyzed by stress contour of automotive tire at contact on road surface. Maximum equivalent stress as 61200Pa is shown on the lower mid part in case of tire contacted on road surface. As the air pressure of tire increases, maximum total deformation as 5mm is shown on the side part of tire. It can be shown that the side part of tire is unstabilized. There is no load effect on tire at its upper and lower directions. When the moment applied on the side of tire is increased 1.4 times as its value, the value of maximum principal stress is increased 1.4 times. The stress at the tire is in proportion to the moment applied on the its side. The tire tends to incline toward its side by this moment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.429-434
• /
• 1994

In this study, an experiment in the field was performed to analyze the variations of rebound ratios of SFRS with silica fume after fabricating the panels and placing the plain concrete of simulting a base rock with thickness 7cm. And the experimental parameters which are the reinforcing methods(steel fiber, wire mesh), steel fiber contents(0.0%, 0.5%, 0.75%, 1.0%), silica fume contents(0.0%, 10.0%), and the three parts(lower, middle, upper part) were chosen. According to the results of the lower part in this test, the larger the fiber contents are in case of steel fiber reinforced shotcrete, the less the rebound ratios are within the range of 20~35%, compared to the wire-mesh reinforced shotcrete with silica fume content of 10%, and these results are true of the middle and upper part, respectively. In addition, the four-stage phenomena of the rebound of SFRS were estimated on the base of a series of the test results.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.29-36
• /
• 2000

In order to reduce a aerodynamic drag of the rear, body, effects of rear lower end configuration of a vehicles were investigated by measuring the pressure distribution, visual flow phenomena by the use of digital image processing technique. The use of flow visualization in recent years has improved the general understanding of structure of complex flow and has yielded valuable information for analyzing fluid flow. As the results, it was found that the shape of rear lower part vehicles not only effected on the pressure distribution of the rear part of the vehicle but also difference of the flow phenomena.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.549-554
• /
• 2000

Generally, it is indicated that concrete using fly ash as a part of cement content has lower early strength, and faster carbonation velocity. To improve these problems and provide useful information for high volume fly ash concrete, the properties of concrete - those include slump, bleeding, setting time, compressive strength and carbonation depth etc. - which contained large amount of fly ash as a part of fine aggregate were investigated experimentally. According to test results, it was found that the compressive strength of the concrete increased in early age as well as in long term age with the increase of the fly ash content. And the carbonation depth of concrete using fly ash as a part of fine aggregate was lower than that of plain concrete(FA 0kg/ $\textrm{m}^3$).

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.3
• /
• pp.373-382
• /
• 2013

In this study, a biological odor treatment system was proposed to remove odor(foul smell) materials causing several problems in the closed sewage treatment plant. This odor treatment system was composed of a two-step biofilter system in one reactor. The two-step biofilter reactor was constructed with natural purification layer in upper part and artificial purification layer in lower part. The reed grasses of water purification plants were planted in the surface area and mixed porous ceramic media were filled with the lower part of biofilter reactor. By using the above experimental apparatus, the ammonia gas removal efficiency was attained to 98.3 % and the hydrogen sulfide gas removal efficiency was appeared more than 97.7 % which shows more effective than the conventional odor removal process.