• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.2
• /
• pp.158-164
• /
• 1985

The objective of the study was to investigate growth pattern of capsule and grain to improve grain filling during the grain filling period in sesame. Growth patterns of capsule and grain from anthesis to maturity were measured and compared by different plant types. Growth of capsule length started to grow just after anthesis and recorded maximum point at 35 days after flowering. and then decreased gradually. Growth of higher part capsule was worse than lower and middle capsules. Capsule growth of 2 carpels 4 loculi type showed better than 4 carpels 8 loculi type and BTB (branch, 3 capsules, 2 carpels, 4 loculi) type showed good growth due to its small reduction of higher part capsule length compared to those of lower and middle parts. The order of growth of capsule length were considered to be center capsule in main stem> center capsule in branch> side capsule in main stem> side capsule in branch. Growth of capsule width also showed maximum at 35 days after anthesis and then reduced. The order of growth of capsule width were lower part> middle part> higher part. Higher part capsule width of 3 capsules 4 carpels 8 loculi type showed serious decrease at late reproductive growth stage same as those of capsule length. Fresh one thousand grain weight showed peak at 35 days after anthesis and then reduced. The order of grain growth were appeared as lower part> middle part> higher part. Growth of fresh one thousand grain weight of branch and side capsule were lower than those of main stem center capsule, and 4 carpels 8 loculi type was deeply decreased at late flowering time in higher part such as the growth of capsule length and width. BTB (branch, 3,2/4) type didn't show much decrease in higher part fresh grain weight compared to those of other plant types in spite of its profitable character of lots of sink capacity. BTB type appeared to be ideal for improving grain filling and yield productivity in growing sesame in Korea.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.2
• /
• pp.97-100
• /
• 1975

This work was carried out to investigate the effects of several mode of picking leaves in autumn on development and harvest of branches, The results obtained are summarized ： (1) The effects of picking leaves in autumn were more conspicuous in weight of branches in length and/or size of branches. (2) In inverse propotion to the amount of picking leaves in autumn, the total weights of branches showed heavy in the non-picking leaves, the lower half part and the middle part-treatment, whereas are light in the upper half- and the all leaves picking-treatment, In spite of excessive picking leaves in autumn however, the middle part-treatment presented heavy weight of branches. (3) The yield of leaves in spring silkworm rearing, in propotion to the amount of picking leaves, were heavy in order of the non-picking leaves-, the middle part, and the lower half part-treatment, while both the upper half and the all leaves picking-treatment showed small amount of harvest. (4) The total yield of mulberry leaves and shoots of middle part-treatment, which showed the largest number of all was larger than that of the non-picking leaves and the all leave picking-treatment (leaving 5 leaves from upper part of shoot) at the ratio of 36％ and 13％, respectively.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.225-228
• /
• 2009

The processing and characterization of ceramic nanocomposites, which produce bulk nanostructures with attractive mechanical properties, have been emphasized and introduced at Prof. Mukherjee's Lab at UC Davis. The following subjects will be introduced in detail in Part II, III, and IV. In Part II, the paper will describe a three-phase alumina-based nanoceramic composite demonstrating superplasticity at a surprisingly lower temperature and higher strain rate. The next part will show that an alumina-carbon nanotube-niobium nanocomposite produced fracture toughness values that are three times higher than that of pure nanocrystalline alumina. It was possible to take advantage of both fiber-toughening and ductile-metal toughening in this investigation. In the fourth section, discussed will be a silicon-nitride/silicon-carbide nanocomposite, produced by pyrolysis of liquid polymer precursors, demonstrating one of the lowest creep rates reported so far in ceramics at the comparable temperature of $1400^{\circ}C$. This was first achieved by avoiding the oxynitride glass phase at the intergrain boundaries. One important factor in the processing of these nanocomposites was the use of the electrical field assisted sintering method. This allowed the sintering to be completed at significantly lower temperatures and during much shorter times. These improvements in mechanical properties will be discussed in the context of the results from the microstructural investigations.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.32-35
• /
• 2003

In this paper, we describe how to represent lower case hand-written English alphabets by a sequence of two to seven fuzzy sets. Each fuzzy set represents an arc segment of the character and each arc segment is assumed to be a part of an ellipse. The part of an ellipse is defined by five quantities: its short and long radii, its orientation angle, whether it is a part of the lower half or the upper half and whether it is the full half or a part of a half. Hence, we use the Cartesian product of five fuzzy sets to represent each arc segment. We show that this representation is a translation, rotation, and scaling invariant and that it can be used to generate the hand-written English alphabets. The representation we describe is different from the one proposed earlier by the author and when compared with the previous representation, the one described in this paper simulates more closely the behavior of how one writes English characters.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.876-881
• /
• 2006

This study was carried out to understand depositional environment and genesis of clayey soils that distributed in the Dongup area. On the basis of detailed observation and description on mineralogy, geochemical composition, geophysical properties, paleontological analysis of cored sediments, three sedimentary unit have been distinguished. From bottom to top, they are early Holocene freshwater muddy deposit(Unit I, fluvial swamp), late Holocene silt and muddy deposit(Unit II, alluvial deposit), late Holocene muddy deposit(Unit III, fluvial swamp). Unit II is divided into three part: the lower part-unweathered massive silt and muddy deposit, middle part-weathered layered slit and muddy deposit and upper part-weathered massive muddy deposit.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.723-730
• /
• 1995

Effects of leaf and pod removal on changes in dry weight and protein content of soybean [Glycine max (L.) Merr.] cultivar 'Hwangkeumkong' were measured at the research farm of Korea University in 1992. The upper 40% and lower 60% of leaves and pods were subjected to treatments at the growth stage of beginning pod(R3). Leaf dry weight of lower part was increased by upper leaf-lower pod removal, but seed dry weight of upper part was decreased. The upper leaf-lower pod removal also increased stem dry weight and decreased upper pod dry weight. Protein content was higher in lower leaves than upper leaves. Seed protein contents were decreased both upper leaf-lower pod removal and lower leaf-upper pod removal treatments. The upper leaf-lower pod removal showed the highest leaf and the lowest seed protein quantities among the five treatments. These results indicated that protein sources were moved from lower to upper parts but weak in remobilization from leaves for the long distance translocation during the reproductive growth period of soybean plants.an plants.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.4
• /
• pp.63-75
• /
• 2018

The lower marine terrace 1 and 2 surfaces distributed between Ulsan and Pohang coast in the southeastern coast of the Korean penninsula have been correlated with MIS 5e and 5a (or 5c) by amino acid dates, 14C dates, wide-spread tephra correlation and pollen analysis respectively. In this study, to test the reliability of the OSL method for the estimation of the numerical burial age of marine sediment deposits, we analyzed the samples from the marine terraces which have been known as typical marine terraces formed during MIS 5e and MIS 5a in the above-mentioned coast. The burial ages of the marine deposit of the lower marine terrace 1 and 2, with paleoshoreline altitudes of 18m to 19m and 10m to 11m respectively, both showed about the same age of 60 ka BP. The lower marine terraces 1 and 2, however, were divided into two terrace surfaces by a clear terrace cliff. Besides, the OSL dates of the lower and upper parts of the lower marine terrace 2 of the Bonggil coast showed the reversed burial ages. In the lower marine terrace 1 of the Sanhari coast, almost the same burial ages were derived from both the lower part (marine rounded gravel layer) and the upper part (terrestrial angular gravel layer) of the terrace deposit. Therefore, at the present time, judging from only the OSL dates measured in this study, it could be argued that the OSL method is not the best for the estimation of forming periods of the lower marine terraces 1 and 2 and their classification.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.281-287
• /
• 2012

Aerosol concentrations at the CC-Lag site in the Teshio Experimental Forest increased from winter to spring and sometimes showed extremely high values associated with Kosa and/or forest-fire events. The range and mean of the mass concentrations of aerosol chemical species were as follows: total particulate mass, 1.2-29, 5.0; elemental carbon, 0.061-2.2, 0.43; organic carbon, 0.059-3.5, 0.79; and sulfate, 0.12-6.2, 1.8 ${\mu}g/m^3$. The total masses of the deposited particles on hybrid larch and on bamboo leaves were approximately 35 and 30 ${\mu}g/cm^2$, respectively. The amounts of soil particles on the leaves were 6 ${\mu}g/cm^2$ for the upper part of hybrid larch, 2 ${\mu}g/cm^2$ for the lower part of hybrid larch, and 1 ${\mu}g/cm^2$ for Sasa bamboo leaves. The amounts of deposited black carbon were 2.3 ${\mu}g/cm^2$ for the upper part of hybrid larch, 0.6 ${\mu}g/cm^2$ for the lower part of hybrid larch, and 0.2 ${\mu}g/cm^2$ for Sasa bamboo leaves. Half of the total deposited particular mass was attached on the hybrid larch; however, most of the total deposited mass was adhered on the Sasa bamboo leaves. Regardless of the species, there tend to be more deposited particles on the leaves in the upper part than in the lower part, with only a few meters height difference. Comparing the composition of the deposited particles to that of the atmospheric aerosols without any size cut, the fractions of water-soluble material sulfate and sea salt in the deposited aerosols were about one tenth and one hundredth lower than that in the aerosols, respectively. On the basis of the measured concentration and the deposited amount on leaves, the deposition velocity of black carbon was estimated to be approximately 0.5 cm/s.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.6
• /
• pp.430-435
• /
• 2013

A seasonal variation of phytoplankton community in the middle-lower part of the Nakdong River was studied in four sampling stations at monthly intervals from January to December 2012. We identified 40 genera 72 species of phytoplankton. Among these, diatoms were 36 species (50.0%), green algae 20 species (27.8%), blue-green algae 9 species (12.5%) and others 7 species (9.7%), respectively. The phytoplankton standing crops were recorded a maximum of 29,640 cells/mL at the Mulgeum (St. 4) in June and a minimum of 236 cells/mL at the Goryung (St. 1) in October. Also, Standing crops were increased with proceeding from middle part to lower part. Ecological important species were Stephanodiscus hantzschii, Cyclotella meneghiniana, Synedra acus, Aulacoseira granulata, Pediastrum sp. and Microcystis aeruginosa. Seasonal succession of phytoplankton represented that Stephanodiscus hantzschii was dominant species in winter, Cyclotella meneghiniana, Synedra acus was dominant species in spring, Microcystis aeruginosa, Cyclotella meneghiniana, Fragilaria crotonensis, Synedra acus, Aulacoseria granulata was dominant species in summer, and Aulacoseria granulata, Cyclotella meneghiniana, Fragilaria crotonensis was dominant species in autumn. In the community analysis, diversity index and dominant index were higher May~July and December~February, respectively. Also, diversity index and dominant index were decreased and increased with proceeding from middle part to lower part.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.29-32
• /
• 2010

This study was conducted to determine the effects of cutting position, media, and auxin on rooting of Artemisia keiskeana cuttings. In the cutting positions, the cutting of middle and basal positions had a better growth in the both upper and lower part than the cutting of the top position. Especially, the cutting of the middle position showed the highest rooting rate, at 68.3%. In the media, peatmoss showed the latest date on the rooting initiation. Also, the growth, survival rate and rooting rate of the upper part and lower part were low. However, the cutting in vermiculate showed the fastest date on the rooting initiation, and had a significant effect on the growth of the upper part and lower part, showing the highest rooting rate and survival rate in all tested media. When cuttings were treated by auxin, the rooting rate and growth of cuttings were higher than the control. The control showed the lowest rooting rate, at 41%, while, the auxin treatment showed the highest, rate over 80%. Whereas when treated by NAA, the lower part of cuttings had a better growth than these treated by IBA. Also, the higher the concentration of auxin was, the higher the rooting rate and growth rate of Artemisia keiskeana cuttings were.