• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.4
• /
• pp.195-204
• /
• 2013

The embedded software has been developed in the forms of various versions that provides similar service based on product family. For increase usefulness of product family, software must has well-structured and reusable properties. Software architecture is important to improve adaptability in model-based development of embedded software mounted onto product family. In this paper, we proposed a technique of ADD(Attribute-Driven Design)-based software architecture design for low power software development. This technique provides a chance to consider the power consumption issue in design phase of software, and makes possible to develop low power embedded software.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.2
• /
• pp.91-99
• /
• 2015

The electric power consumed by the embedded devices has become a critical issue because the reduction of power consumption is an important factor to prolong the battery-operated devices' lifetime. Many researches and techniques to reduce the power consumption have been proposed and developed but any power method cannot guarantee optimal power consumption of an embedded device - it would be faced with numerous situation - in all ways. Specifically, power researches for embedded devices deployed in the industry field have hardly been done. In this paper, low power service is proposed to minimize power reduction with the several usage status of embedded devices in the industry field. The usage status is basically classified according to the distance between the device and the user which is obtained by the ultrasonic and PIR sensor. The performance evaluation shows that the proposed scheme can reduce the power consumption by up to 45.3% compared to the device with no power reduction scheme. It also shows that the power consumption of the proposed scheme is 5.2% ~ 16.8% lower than that of the timeout scheme.

• Journal of Convergence Society for SMB
• /
• v.1 no.1
• /
• pp.55-65
• /
• 2011

Due to the rapid advance of IT technologies such as mobile communication, sensor network, wearable computer, and so on, the needs of embedded software has increased. In those domain areas, the development of low-power embedded software is one of critical issues to enhance servicability of the system because almost embedded system depends on battery-based power supply system. Therefore this paper identifies the factors that can reduce the power consumption in embedded software operation, and proposes the method that how to handle the factors in software development process. Even though the existing and general studies about power reduction has been performed with code-based analysis, this analysis approach can lead reworks when the requirement for power consumption was not met. Our proposed techniques will support the power reduction in embedded software development process whenever the code was not developed. Our proposed process for lop-power embedded software development can gives the high quality in power-related serviceability.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.3
• /
• pp.180-187
• /
• 2004

A conventional power supply of a microwave oven has a 60Hz transformer and high voltage capacitor(HVC). Though it is very simple and has low cost, it has several problems such as large size, heavy weight and low efficiency To improve these problems, various high frequency inverter type power supply have been investigated and developed in recent years. But these cost is higher than the conventional one due to additional control circuit, fast switching devces. In this paper, a novel pulse power supply for microwave oven using high frequency transformer embedded HVC(High Voltage Capacitor) is proposed for down-sizing, cost reduction and efficient improvement. To verify the effectiveness of the proposed transformer, an equivalent circuit of transformer embedded HVC is derived and it's characteristic is described. And the validity of the proposed pulse power supply embedded HVC-high frequency transformer is shown by simulations and experiments accroding to various operating conditions.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.3
• /
• pp.151-156
• /
• 2015

Recently, an embedded flash memory has been widely used for the Internet of Things(IoT). Due to its nonvolatility, economical feasibility, stability, low power usage, and fast speed. With respect to power consumption, the embedded memory system must consider the most significant design factor. The objective of this research is to design high performance and low power NAND flash memory architecture including a dual buffer as a replacement for NOR flash. Simulation shows that the proposed NAND flash system can achieve better performance than a conventional NOR flash memory. Furthermore, the average memory access time of the proposed system is better that of other buffer systems with three times more space. The use of a small buffer results in a significant reduction in power consumption.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.3
• /
• pp.207-220
• /
• 2011

Coarse-grained reconfigurable architecture (CGRA) based embedded systems aims to achieve high system performance with sufficient flexibility to map a variety of applications. However, the CGRA has been considered as prohibitive one due to its significant area/power overhead and performance bottleneck. In this work, I propose reconfigurable multi-array architecture to reduce power/area and enhance performance in configurable embedded systems. The CGRA-based embedded systems that consist of hierarchical configurable computing arrays with varying size and communication speed were examined for multimedia and other applications. Experimental results show that the proposed approach reduces on-chip area by 22%, execution time by up to 72% and reduces power consumption by up to 55% when compared with the conventional CGRA-based architectures.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.626-628
• /
• 2004

This paper describes an 8-bit CMOS folding A/D converter for set-top box. Modular low-power, high-speed CMOS A/D converter for embedded systems aims at design techniques for low-power, high-speed A/D converter processed by the standard CMOS technology. The time-interleaved A/D converter or flash A/D converter are not suitable for the low-power applications. The two-step or multi-step flash A/D converters need a high-speed SHA, which represents a tough task in high-speed analog circuit design. On the other hand, the folding A/D converter is suitable for the low-power, high-speed applications(Embedded system). The simulation results illustrate a conversion rate of 40MSamples/s and a Power dissipation of 80mW(only analog block) at 2.5V supply voltage.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.29-38
• /
• 2018

It is the approach of embedded system design that analyzes COS(Cut Out Switch) failure in the power distribution and an instantaneous breakdown of power distribution supply could cause the weakness of industrial competence and therefore we need to feed the stable power distribution with developing the technology of open-source embedded system. In this paper, we apply the LoRa technology which is the Internet of Things(IoT) protocol for low data rate, low power, low cost and long range sensor applications. We designed the hardware and software architecture setup and experimented the embedded system with network architecture and COS monitoring system including accelerometer for detecting the failure of distribution line and sensing the failure of its fuse holder by recognizing the variation and collision and afterwards sending the information to a gateway. With experimenting we designed the embedded platform for sensing the variation and collision according to the COS failure, monitoring its fuse holder status and transferring the information of states with LoRa technology.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.4
• /
• pp.47-54
• /
• 2022

In this paper, MEMS embedded system design implemented the sensor events via analyzing the characteristics that dynamically happened to an abnormal status in power IoT environments in order to guarantee a maintainable operation. We used three kinds of tools in this paper, at first Bluetooth Low Energy (BLE) technology which is a suitable protocol that provides a low data rate, low power consumption, and low-cost sensor applications. Secondly LSM6DSOX, a system-in-module containing a 3-axis digital accelerometer and gyroscope with low-power features for optimal motion. Thirdly BM1422AGMV Digital Magnetometer IC, a 3-axis magnetic sensor with an I2C interface and a magnetic measurable range of ±120 uT, which incorporates magneto-impedance elements to detect the magnetic field when the current flowed in the power devices. The proposed MEMS system was developed based on an nRF5340 System on Chip (SoC), previously compared to the standalone embedded system without bluetooth technology via mobile App. And also, MEMS embedded system with BLE 5.0 technology broadcasted the MEMS system status to Android mobile server. The experiment results enhanced the performance of MEMS system design by combination of sensors, BLE technology and mobile application.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1976-1981
• /
• 2003

Except a desktop computer and workstation, an embedded system is a system containing microprocessors. While a desktop computer and a workstation are designed for a general purpose, an embedded system is designed for a dedicated purpose. Thus, an embedded system must meet some constraints such as low power consumption, low cost, small size, real-time, or user-defined ones. A simple and low cost embedded system may be able to be designed without using embedded operating systems (OS). However, considered design time and effort, some embedded system had better be designed with using embedded OS. Under given constraints and purpose of some embedded systems, one embedded OS can save more time, cost, and effort in designing those embedded systems than others. This paper compares four embedded OSs, Windows CE, Embedded Linux, pSOS, and uC/OS. It analyzes several issues of embedded OS such as process scheduling, inter-process communication (IPC), memory management, and network support. Also, it describes the product of each embedded OS.