• International Journal of Air-Conditioning and Refrigeration
• /
• 제14권4호
• /
• pp.156-165
• /
• 2006

Convective boiling heat transfer coefficients were measured in a horizontal minichannel with R-l34a. The test section was made of stainless steel tube with an inner diameter of 3.0 mm and a length of 2m. It was uniformly heated by applying electric current directly to the tube. Local heat transfer coefficients were obtained for heat fluxes from 10 to $40kW/m^2$, mass fluxes from 200 to $600kgT/m^2s$, qualities up to 1.0, and the inlet saturation temperature of $10^{\circ}C$. The experimental results were mapped on Wojtan et $al.'s^(7)$ and Wang et $al.'s^(8)$ flow pattern maps. The nucleate boiling was predominant at low vapor quality whereas the convective boiling was predominant at high vapor quality. Laminar flow appeared in the flow with minichannel. The experimental results were compared with six existing two-phase heat transfer coefficient correlations. A new boiling heat transfer coefficient correlation based on the superposition model for refrigerants was developed with mean and average deviations of 10.39% and -3.66%, respectively.

• Korea-Australia Rheology Journal
• /
• 제21권4호
• /
• pp.269-280
• /
• 2009

The drop formation dynamics of a shear thinning, elastic, yield stress ($\tau_o$) fluid (Carbopol 980 (poly(acrylic acid)) dispersions) in silicone oil has been investigated in a flow-focusing microfluidic channel. The rheological character of each solution investigated varied from Netwonian-like through to highly non-Newtonian and was varied by changing the degree of neutralization along the poly (acrylic acid) backbone. We have observed that the drop size of these non-Newtonian fluids (regardless of the degree of neutralisation) showed bimodal behaviour. At first we observed increases in drop size with increasing viscosity ratio (viscosity ratio=viscosity of dispersed phase (DP)/viscosity of continuous phase (CP)) at low flowrates of the continuous phases, and thereafter, decreasing drop sizes as the flow rate of the CP increases past a critical value. Only at the onset of pinching and during the high extensional deformation during pinch-off of a drop are any differences in the non-Newtonian characteristics of these fluids, that is extents of shear thinning, elasticity and yield stress ($\tau_o$), apparent. Changes in these break-off dynamics resulted in the observed differences in the number and size distribution of secondary drops during pinch-off for both fluid classes, Newtonian-like and non-Newtonian fluids. In the case of the Newtonian-like drops, a secondary drop was generated by the onset of necking and breakup at both ends of the filament, akin to end-pinching behavior. This pinch-off behavior was observed to be unaffected by changes in viscosity ratio, over the range explored. Meanwhile, in the case of the non-Newtonian solutions, discrete differences in behaviour were observed, believed to be attributable to each of the non-Newtonian properties of shear thinning, elasticity and yield stress. The presence of a yield stress ($\tau_o$), when coupled with slow flow rates or low viscosities of the CP, reduced the drop size compared to the Newtonian-like Carbopol dispersions of much lower viscosity. The presence of shear thinning resulted in a rapid necking event post onset, a decrease in primary droplet size and, in some cases, an increase in the rate of drop production. The presence of elasticity during the extensional flow imposed by the necking event allowed for the extended maintenance of the filament, as observed previously for dilute solutions of linear polymers during drop break-up.

• 대한기계학회논문집B
• /
• 제27권12호
• /
• pp.1681-1690
• /
• 2003

The effect of roughness is a change in the velocity and turbulence distributions near the surface. Turbulence models with surface roughness effect are applied to the fully developed flow in a two-dimensional, rough wall channel. Modified wall function model, low-Reynolds number k-$\varepsilon$ model, and k-$\omega$ model are selected for comparison. In order to make a fair comparison, the calculation results are compared with the experimental data. The modified wall function model and the low-Reynolds number k-$\varepsilon$ model require further refinement, while the k-$\omega$ model of Wilcox performs remarkably well over a wide range of roughness values.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.86-91
• /
• 2007

A study was performed to understand self-excited pressure fluctuations in the lean premixed flames and to evaluate the effect of Helmholtz resonator on the pressure fluctuations. As low-frequency pressure fluctuations have been reported to cause fatal damage to the combustor and the entire system, Helmholtz-type resonators, which reduce the damage by low-frequency pressure fluctuation in the combustor, are attached to the channel of unburned mixture flow. It is found that the range of low-frequency pressure fluctuations of flame mode 2 is narrowed by the attachment of Helmholtz resonators. From this result, if Helmholtz-type resonators are applied to actual gas turbine combustor, it is confirmed that Helmholtz resonators attached on the fuel discharge hole are also effective for narrowing the range of flame mode 2

• 한국추진공학회지
• /
• 제15권1호
• /
• pp.69-75
• /
• 2011

한국형발사체 엔진에 사용될 예정인 75톤급 연소기 채널냉각형 기술검증시제에 대한 연소시험을 수행하였다. 설비 공급 능력과 구조물 강도 제한으로 정상 유량의 50% 수준에서 시험이 수행되었다. 75톤급 채널냉각 연소기의 저압연소시험을 통해 점화구간과 연소구간에서의 작동성과 안정성이 확인되었다. 더불어 75톤 연소기의 성능요구조건을 만족시킬 수 있을 것으로 추정할 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.71-74
• /
• 2010

한국형발사체 엔진에 사용될 것으로 예상되는 75톤급 연소기의 기술검증시제를 이용하여 2회 연소시험을 수행하였다. 설비 공급 능력과 구조물 강도 제한으로 정상 유량의 50% 수준에서 시험이 수행되었다. 채널냉각 연소기를 이용한 저압연소시험을 통해 점화구간과 연소구간에서의 신뢰도와 안정성이 확인되었다. 더불어 75톤 연소기가 성능요구조건을 만족시킬 수 있을 것으로 추정할 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권10호
• /
• pp.4754-4773
• /
• 2018

In sensor medium access control (SMAC) protocol, sensor nodes can only access the channel in the scheduling and listening period. However, this fixed working method may generate data latency and high conflict. To solve those problems, scheduling duty in the original SMAC protocol is divided into multiple small scheduling duties (micro duty MD). By applying different micro-dispersed contention channel, sensor nodes can reduce the collision probability of the data and thereby save energy. Based on the given micro-duty, this paper presents an adaptive duty cycle (DC) and back-off algorithm, aiming at detecting the fixed duty cycle in SMAC protocol. According to the given buffer queue length, sensor nodes dynamically change the duty cycle. In the context of low duty cycle and low flow, fair binary exponential back-off (F-BEB) algorithm is applied to reduce data latency. In the context of high duty cycle and high flow, capture avoidance binary exponential back-off (CA-BEB) algorithm is used to further reduce the conflict probability for saving energy consumption. Based on the above two contexts, we propose an improved SMAC protocol, micro duty adaptive SMAC protocol (MDA-SMAC). Comparing the performance between MDA-SMAC protocol and SMAC protocol on the NS-2 simulation platform, the results show that, MDA-SMAC protocol performs better in terms of energy consumption, latency and effective throughput than SMAC protocol, especially in the condition of more crowded network traffic and more sensor nodes.

• 한국해양학회지
• /
• 제6권1호
• /
• pp.49-55
• /
• 1971

1969년 10월에 완성된 남강 다목점 댐과 방수로가 준공되어 1969년에 7회, 1970년에 3회 합계 10회에 걸쳐 1,359 $10^{6}$㎥ 이상의 담수를 진주만으로 방수하였다. 방수 속도는 최고 약 3,770㎥/sec 에 이르렀으며 1회 누적 방수량은 최고 4.50 $10^{6}$㎥ 이상에 달하였다. 이 결과 방수로 하류부와 연결되는 사천만 북부에서는 5kt 이상의 빠른 유속이 해저의 토사를 이동시켜 간석지와 해저의 지형을 변동시켰다. 양식장 시설물과 패류를 매몰, 유실 시키는 원인이 되었다. 하구 현상이 일어 났으며 2중조가 관측되었다. 어구의 파손, 발장의 도괴 및 어선의 조업 불능 등으로 피해가 막심하였다. 방수후 진주만의 염분은 급격히 하강하였으며 특히 사천만 에서는 밀물때에도 5 이하의 이상저염분수가 분포하였다. 현저한 조경이 이루어졌으며 반조석 주기에 4.6 에서 30 로 약 25 이상의 염분 급변이 있었다. 이와같은 염분의 저하와 급변은 동해역의 굴, 바지락 등 패류를 폐사시키고 멸치, 문어 등을 만외로 추방하는 원인이 되었으며, 내유 어군의 접근을 방해하였다. 염분의 저하는 해수의 밀도와 삼투압 환경을 급변 시키는 원인이 되었고, 투명도가 낮은 혼탁한 물덩이는 광선의 투입을 방해하여 광합성 작용을 억제할 것이다.

• Biomolecules & Therapeutics
• /
• 제7권3호
• /
• pp.249-256
• /
• 1999

Glibenclamide(GLY)(1.0 and 3.0 mg/kg), an ATP-dependent $K^+$ channel blocker, when given into the vein in dogs, produced the diuretic action accompanied with the increase of osmolar clearance($C_{osm}$), urinary excretion of $Na^+$ and $K^+$ ($E_{Na}$, $E_K$), and with the decrease in reabsorption rates for $Na^+$ and $K^+$ in renal tubules ($R_{Na}$, $R_K$), and then ratios of $K^+$ against $Na^+$($K^+$/$Na^+$) were decreased. GLY did not affect mean arterial pressure at any doses used. At a low dose(0.1 mg/kg), GLY injected into a renal artery brought about the diurectic action in both experimental and control kidney, however at a higher dose(0.3 mg/kg), GLY appeared significant diuretic action in the control kidney, but not in experimental kidney and the decrease of glomerular filtration rates(GFR), renal plasma flow(RPF), $E_K$, and the increase in $E_{Na}$. In the control kidney, these changes in renal function exhibited the same aspect as shown in intravenous experiments. In experiments given into carotid artery of GLY(0.5 and 1.5 mg/kg), changes in all renal function included the increase in urine volume were the same pattern as shown in intravenous experiments. The above results suggest that glibenclamide produces diuretic action through central function and the action site of the GLY in kidney is the renal distal tubules in dogs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권1호
• /
• pp.1-17
• /
• 2016

The separated management and operation of commercial IP/optical multilayer networks makes network operators look for a unified control plane (UCP) to reduce their capital and operational expenditure. Software-defined networking (SDN) provides a central control plane with a programmable mechanism, regarded as a promising UCP for future optical networks. The general control and scheduling mechanism in SDN-based optical burst switching (OBS) networks is insufficient so the controller has to process a large number of messages per second, resulting in low network resource utilization. In view of this, this paper presents the burst-flow scheduling mechanism (BFSM) with a proposed scheduling algorithm considering channel usage. The simulation results show that, compared with the general control and scheduling mechanism, BFSM provides higher resource utilization and controller performance for the SDN-based OBS network in terms of burst loss rate, the number of messages to which the controller responds, and the average latency of the controller to process a message.