Korea-Australia Rheology Journal

The Korean Society of Rheology (한국유변학회)
권호 표지

Drop formation of Carbopol dispersions displaying yield stress, shear thinning and elastic properties in a flow-focusing microfluidic channel

  • Hong, Joung-Sook (Tissue Engineering and Microfluidics Laboratory, Australian Institute for Bioengineering and Nanotechnology, The University of Queensland) ;
  • Cooper-White, Justin (Tissue Engineering and Microfluidics Laboratory, Australian Institute for Bioengineering and Nanotechnology, The University of Queensland)
  • Published : 2009.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The drop formation dynamics of a shear thinning, elastic, yield stress ($\tau_o$) fluid (Carbopol 980 (poly(acrylic acid)) dispersions) in silicone oil has been investigated in a flow-focusing microfluidic channel. The rheological character of each solution investigated varied from Netwonian-like through to highly non-Newtonian and was varied by changing the degree of neutralization along the poly (acrylic acid) backbone. We have observed that the drop size of these non-Newtonian fluids (regardless of the degree of neutralisation) showed bimodal behaviour. At first we observed increases in drop size with increasing viscosity ratio (viscosity ratio=viscosity of dispersed phase (DP)/viscosity of continuous phase (CP)) at low flowrates of the continuous phases, and thereafter, decreasing drop sizes as the flow rate of the CP increases past a critical value. Only at the onset of pinching and during the high extensional deformation during pinch-off of a drop are any differences in the non-Newtonian characteristics of these fluids, that is extents of shear thinning, elasticity and yield stress ($\tau_o$), apparent. Changes in these break-off dynamics resulted in the observed differences in the number and size distribution of secondary drops during pinch-off for both fluid classes, Newtonian-like and non-Newtonian fluids. In the case of the Newtonian-like drops, a secondary drop was generated by the onset of necking and breakup at both ends of the filament, akin to end-pinching behavior. This pinch-off behavior was observed to be unaffected by changes in viscosity ratio, over the range explored. Meanwhile, in the case of the non-Newtonian solutions, discrete differences in behaviour were observed, believed to be attributable to each of the non-Newtonian properties of shear thinning, elasticity and yield stress. The presence of a yield stress ($\tau_o$), when coupled with slow flow rates or low viscosities of the CP, reduced the drop size compared to the Newtonian-like Carbopol dispersions of much lower viscosity. The presence of shear thinning resulted in a rapid necking event post onset, a decrease in primary droplet size and, in some cases, an increase in the rate of drop production. The presence of elasticity during the extensional flow imposed by the necking event allowed for the extended maintenance of the filament, as observed previously for dilute solutions of linear polymers during drop break-up.

Keywords

References

  1. Paul C. H. Li, 2006, Microfluidic Lab-on a-chip for chemical and biological analysis and discovery, CRC press
  2. J. Berthier and P. Silberzan, 2006, Microfluidics for biotechnology, Artech House
  3. M. R. Davidson and J. J. Cooper-White, 2006, Pendant drop formation of shear-thinning and yield stress fluids, App. Math. Modelling
  4. G. I. Taylor, 1932, The Viscosity of a fluid containing small drops of another fluid, Proc Roy Soc London, A138, 41
  5. Han C. D., 1981, Multiphase Flow in, Polymer Processing, Academic Press, New York
  6. Mighri F., Ajji A. and Carreau P. J., 1997, Influence of elastic properties on drop deformation in elongational flow, J. Rheol., 41, 1183-1201 https://doi.org/10.1122/1.550853
  7. Levitt. L, Macosko C. W. and Pearson S. D., 1996, Influence of normal stress difference on polymer drop deformation, Polym. Eng. Sci., 36, 1647-1655 https://doi.org/10.1002/pen.10561
  8. W. J. Milliken and L. G. Leal, 1991, Deformation and breakup of viscoelastic drops in planar extensional flow, J. Non-Newtonian Fluid Mech., 40, 355-379 https://doi.org/10.1016/0377-0257(91)87018-S
  9. J. J. Cooper-White, J. E. Fagan, V. Tirtaatmadja, D. R. Lester and D. V. Boger, 2002, Drop formation dynamics of constant lowviscosity elastic fluids, Non-Newtonian Fluid Mech., 106(1), 29 https://doi.org/10.1016/S0377-0257(02)00084-8
  10. P. Doshi, R. Suryo, O. E. Yildirim, G. H. McKinley and O. A. Basaran, 2003, Scaling in pinch-off of generalized Newtonian fluids, J. Non-Newtonian Fluid Mech., 113, 1-27 https://doi.org/10.1016/S0377-0257(03)00081-8
  11. R. Suryo and O. A. Basaran, 2006, Local dynamics during pinch-off of liquid threads of power law fluids: scaling analysis and self-similarity, J. Non-Newtonian Fluid Mech., 138, 134-160 https://doi.org/10.1016/j.jnnfm.2006.04.008
  12. O. E. Yildirim, O. A. Basaran, 2006, Dynamics of formation and dripping of drops of deformation-rate-thinning and -thickening liquids from capillary tubes, J. Non-Newtonian Fluid Mech., 136, 17-37 https://doi.org/10.1016/j.jnnfm.2006.02.009
  13. A. Bhunia, S. Pais, Y. Kamotani and I. Kim, 1998, Bubble formation in a coflow configuration in normal and reduced gravity, AIChe J. 44, 1499-1509 https://doi.org/10.1002/aic.690440704
  14. H. K. Nahra and Y. Kamotani, 2000, Bubble formation from wall orifice in liquid cross-flow under low gravity, Chem. Eng. Sci. 55, 4653-4665 https://doi.org/10.1016/S0009-2509(00)00102-0
  15. H. K. Nahra and Y. Kamotani, 2003, Prediction of bubble diameter at detachment from wall orifice in liquid cross-flow under reduced and normal gravity conditions, Chem. Eng. Sci., 58, 55 https://doi.org/10.1016/S0009-2509(02)00516-X
  16. S. L. Anna, N. Bontoux and H. A. Stone, 2003, Formation of dispersions using 'flow focusing' in microchannels, App. Phy. Lett., 82(3), 364-366 https://doi.org/10.1063/1.1537519
  17. Q. Xu, M. Nakajima, 2004, The generation of highly monodisperse droplets through the breakup of hydrodynamically focused microthread in a microfluidic device, App. Phy. Lett., 85(1), 3726-3728 https://doi.org/10.1063/1.1812380
  18. L. Rayleigh, On the capillary phenomena of jets, Proc. R. Soc., 29, 71-97 https://doi.org/10.1098/rspl.1879.0015
  19. J. Hadamard, 1911, Measurement permanent lent d'une sphere liquide et visqueuse dans un liquide visquex, CR Acad Sci., 1735
  20. W. Rybczynski, 1911, Translatory motion of a fluid sphere in viscous medium, Bull. Int. Acad. Pol. Sci. Leu. CI Sci. Nat. Ser. A 40
  21. J. Husny and J. J. Cooper-White, 2006, The effect of elasticity on drop creation in T-shaped microchannels, J. Non-Newtonian Fluid Mech
  22. Noveon, TDS-103, http://www.personlacare.noveon.com/tech-data/Carbopol980.asp
  23. L. E. Rodd, T.P. Scott, J. J. Copper-White and G.H. McKinley, 2005, Capillary break-up rheometry of low-viscosity elastic fluids, Appl. Rheol., 15, 12-27
  24. A. E. Park, 2003,Capillary brakup of food stuffs and other complex fluids, MS Thesis, MIT, Cambridge(USA)
  25. Microchem, SU-8-50. http://www.microchem.com/products/su_eight.htm