• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.12
• /
• pp.80-90
• /
• 1994

To develop VLSI of higher packing density with 0.5.mu.m gate length of less, semiconductor devices require shallow junction with higher doping concentration. the most common method to form the shallow junction is ion implantation, but in order to remove the implantation induced defect and activate the implanted impurities electrically, ion-implanted Si should be annealed at high temperature. In this annealing, impurities are diffused out and redistributed, creating deep PN junction. These make it more difficult to form the shallow junction. Accordingly, to miimize impurity redistribution, the thermal-budget should be kept minimum, that is. RTA needs to be used. This paper reports results of the diffusion characteristics of PSG film by varying Phosphorus weitht %/ Times and temperatures of RTA. From the SIMS.ASR.4-point probe analysis, it was found that low sheet resistance below 100 .OMEGA./ㅁand shallow junction depths below 0.2.mu.m can be obtained and the surface concentrations are measured by SIMS analysis was shown to range from 2.5*10$^{17}$ aroms/cm$^{3}$~3*10$^{20}$ aroms/cm$^{3}$. By depending on the RTA process of PSG film on Si, LDD-structured nMOSFET was fabricated. The junction depths andthe concentration of n-region were about 0.06.mu.m. 2.5*10$^{17}$ atom/cm$^{-3}$ , 4*10$^{17}$ atoms/cm$^{-3}$ and 8*10$^{17}$ atoms/cm$^{3}$, respectively. As for the electrical characteristics of nMOS with phosphorus junction for n- region formed by RTA, it was found that the characteristics of device were improved. It was shown that the results were mainly due to the reduction of electric field which decreases hot carriers.

• Journal of Broadcast Engineering
• /
• v.12 no.5
• /
• pp.445-451
• /
• 2007

This study was started to not only resolve structural problems such as lack of contents, an unstable structure of earnings, and reduction of an additional market in Korean film industry through revitalizing digital cinema, but also make digital cinema become a power for growing Korean film industry furthermore. In the section of revitalizing digital cinema production, I suggest that expanding an audience base of low budget art cinema using digital technology will contribute to diversity film contents, and joint production with broadcasters by digital technology will expedite growing film industry as well as revitalizing digital cinema production. In the section of revitalizing digital cinema distribution, I insist, we should make effort positively to build reasonable hold-back and so on in order that film industry's positive participation in the market of digital film distribution and new media such as DMB or IP-TV may become an additional market to film industry. In conclusion, we can gain a foothold to leap toward a Position of cultural technology Power through efforts to resolve problems inherent in digital cinema.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.5
• /
• pp.313-320
• /
• 2015

A 2-axis gimbal-type X-band antenna has been widely used to effectively transmit the high resolution image data from the observation satellite to the desired ground station. However, a discontinuous stepper motor activation for rotating the pointing mechanism in azimuth and elevation directions induces undesirable micro-vibration disturbances which can result in the image quality degradation of a high-resolution observation satellite. To enhance the image quality of the observation satellite, attenuating the micro-vibration induced by an activation of the stepper motor for rotational movements of the antenna is important task. In this study, we proposed a low-rotational-stiffness blade gear applied to the output shaft of the stepper motor to obtain the micro-vibration isolation performance. The design of the blade gear was performed through the structure analysis such that this gear is satisfied with the margin of safety rule under the derived torque budget. In addition, the micro-vibration isolation performance of the blade gear was verified through the micro-vibration measurement test using the dedicated micro-vibration measurement device proposed in this study.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.113-118
• /
• 2016

Project management is a tool for smooth operation during a full cycle from the design to normal operation including the schedule, document, and budget management, and document management is an important work for big projects such as the JRTR (Jordan Research and Training Reactor). To manage the various large documents for a research reactor, a project management system was resolved, a project procedure manual was prepared, and a document control system was established. The ANSIM (Advanced Nuclear Safety Information Management) system consists of a document management folder, document container folder, project management folder, organization management folder, and EPC (Engineering, Procurement and Construction) document folder. First, the system composition is a computerized version of the Inter-office Correspondence (IOC), the Document Distribution for Agreement (DDA), Design Documents, and Project Manager Memorandum (PM Memo) works prepared for the research reactor design. Second, it reviews, distributes, and approves design documents in the system and approves those documents to register and supply them to the research reactor user. Third, it integrates the information of the document system-using organization and its members, as well as users' rights regarding the ANSIM document system. Throughout these functions, the ANSIM system has been contributing to the vitalization of united research. Not only did the ANSIM system realize a design document input, data load, and search system and manage KAERI's long-period experience and knowledge information properties using a management strategy, but in doing so, it also contributed to research activation and will actively help in the construction of other nuclear facilities and exports abroad.

• Journal of the korean society of oceanography
• /
• v.33 no.4
• /
• pp.157-167
• /
• 1998

The distribution of particulate organic carbon and nitrogen (POC and PON) and chlorophyll a of particulate organic matter was investigated in the southwestern East Sea in August and October 1995. The upwelled 'cold water mass' with temperature less than 14$^{\circ}$C occurred near the Campo coast in August. At most of the onshore stations, concentrations of POC and PON were high in surface water, rapidly decreased with depth down to 30 m and then remained constant. Differences in their concentrations between surface and bottom waters were larger in August than in October. At the offshore stations, POC and PON were higher in surface than in deep waters though the differences in concentration were small. The highest, vertically integrated inventories of POC, PON and phytoplanktonic carbon in the upper mixed waters of the onshore stations occurred in August. The mixed layers at onshore stations showed relatively high percentages of POC, PON and chlorophyll a in total suspended matter, low ratios of POC to chlorophyll a and high inventories of phytoplanktonic carbon, compared with the values at offshore stations. These phenomena were more obvious in August, when cold water mass developed strongly, than in October. These results indicate that primary production plays a significant role for the budget of particulate organic matter in the upwelled cold water mass of the southwestern East Sea.

• The Korean Journal of Community Living Science
• /
• v.24 no.4
• /
• pp.567-581
• /
• 2013

This study aimed to investigate fruit and vegetable consumption status of school children and adolescents and factors influencing their consumption from focus-group interviews with school nutrition teacher(s) and nutritionists. Most of all the evaluated fruit and vegetable intake levels of school children and adolescents was very low. They mentioned the intake of fruit and vegetable was similar between children and adolescents and boys tended to have less vegetable intake than girls. There was substantial difference in the serving frequencies of fruit between schools due to budgets. Fruit was consumed more than vegetables and fruit without seeds or peeled fruit was more preferred by children and adolescents. Factors affecting fruit and vegetable intake of children and adolescents were analysed by personal, family and school. Personal factors were gender, child development level, the lack of knowledge or perception on vegetables, westernized diet pattern and the preference of spicy foods. Family factors were the perception of parents, family meal environment, and income disparity. The factors related to schools were the principal, class teacher, friends, nutrition teacher, cooking and serving methods, cooking personals, budget and so on.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.6
• /
• pp.511-516
• /
• 2004

As a preliminary study on the sediment flux, concentrations of suspended particulate matter and current speeds were measured at three inlets of Gwangyang Bay during one tidal cycle of a spring tide of March 2003. The suspended sediment flux rate $(g/m^{2}/s)$ at the mouth of Seomjin River (St. K1) was observed to be higher throughout surface layer during ebb tide $(14.3\;g/m^{2}/s)$ and throughout near-bottom layer during the flood tide $(23.2\;g/m^{2}/s),$ resulting in a net upstream-ward transport of$0.9{\times}10^{3}kg/m$ during 13 period. At the inlet toward Yeosu Bay (St. K2), a relatively low rate ($(5.0-6.7\;g/m^{2}/s)$ of sediment flux occurred throughout the water column compared to St. K1, with a depth-integrated net transport of $5.6{\times}10^{3}kg/m$ toward the outer reaches of Gwangyang Bay inlet. At St. K3 located at Gwangyang Bay-side of Noryang Strait, the outward flux toward the Jinju Bay was observed to be dominant during the flood tide $(16.2-23.2\;g/m^{2}/s)$, especially through the mid and near bottom layer, compared to the inward flux throughout the whole water column during the ebb tide $(13.1-19.7\;g/m^{2}/s).$ The net transport at St. K3 was calculated to be $4.0{\times}10^{3}kg/m$ toward the outside of Gwangyang Bay. The outward net transport of suspended sediment at all three inlets seems to be consistent with a trend of bottom sediment texture, which suggests a net movement of sediment from a relatively coarse and poorly sorted inner-bay toward a relatively fine and better sorted outer-bay environment.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.257-268
• /
• 2016

The purpose of this research is to find the cause of low degree of utilization of medical equipment that are provided as Official Development Assistance(ODA) and to suggest an effective medical equipment support system for ODA. This research analyzes the supporting process of the medical equipment as ODA in Kitengela Health Center in Kenya. As the result of analysis, it has been found that the following problems. 1) It was found that users was attended insufficient to demand medical equipment. 2) The determination of medical equipment request was inadequate. 3) It was appeared to be organized the compilation of the budget for purchases and operation of medical equipment 4) The improvement of procurement system of medical equipment was appeared to need. 5) It was appeared to need to build conditions for installation of medical equipment. 6) It was necessary to secure finance, to conduct periodic management training, and to ensure available human resources in management and maintenance in order to sustain the medical equipment management ability and it is encouraged to promote leadership in healthcare facility management. Finally, the theoretical and practical implications of this research are discussed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.9
• /
• pp.1262-1272
• /
• 2003

A two-dimensional direct numerical simulation is performed to investigate the dynamic behaviors of a single vortex in counter reacting and non-reacting flow field. A predictor-corrector-type numerical scheme with a low Mach number approximation is used in this simulation. A 16-step augmented reduced mechanism is adopted to treat the chemical reaction. The budget of the vorticity transport equation is examined to reveal a mechanism leading to the formation, destruction and transport of a single vortex according to the direction of vortex generation in reacting and non-reacting flows. The results show that air-side vortex has more larger strength than that of fuel-side vortex in both non-reacting and reacting flows. In reacting flow, the vortex is more dissipated than that in non-reacting flow as the vortex approach the flame. The total circulation in reacting flow, however, is larger than that in non-reacting flow because the convection transport of vorticity becomes much large by the increased velocity near the flame region. It is also found that the stretching and the convection terms mainly generate vorticity in non-reacting and reacting flows. The baroclinic torque term generates vorticity, while the viscous and the volumetric expansion terms attenuate vorticity in reacting flow. Furthermore, the contribution of volumetric expansion term on total circulation for air-side vortex is much larger than that of fuel-side vortex. It is also estimated that the difference of total circulation near stagnation plane according to the direction of vortex generation mainly attributes to the convection term.

• Journal of Distribution Science
• /
• v.14 no.10
• /
• pp.147-152
• /
• 2016

Purpose - High quality films are affected by both the production stage and various variables such as the size of the movie investment and marketing that changes consumers' perceptions. Consumer preferences should be recognized first to ensure that the movie is successful. If a film is produced without pre-investigation and analysis of consumer demand and taste, the probability of success will be low. This study investigates the balance of production costs, marketing costs, and profits using game theory, suggesting an optimization strategy using the simplex method of linear programming. Research design, data, and methodology - Before the release of the movie, initial demand is assumed to be driven largely by marketing costs. In the next phase, demand is assumed to be driven purely by a movie's production cost and quality, which might also further determine consumer demand. Thus, it is essential to determine how to distribute pure production costs and other costs (marketing) in a limited movie production budget. Moreover, it should be taken into account how to optimally distribute under the assumption that the audience and production company's input resources are limited. This research simplifies the assumptions for large-scale and relatively small-scale movie investments and examines how movie distribution participant profits differ when each cost is invested differently. Results - When first movers or market leaders have to choose both quality and marketing, it has been proven that pursuing a strategy choosing only one is more likely than choosing both. In this situation, market leaders should maximize marketing costs under the premise that market leaders will not lag their quality behind the quality of second movers. Additionally, focusing on movie marketing that produces a quick effect while ceding creative activity to increase movie quality is a natural outcome in the movie distribution environment since a cooperative strategy between market competitors is not feasible. Conclusions - Government film development policy should ignore quality competition between movie production companies and focus on preventing marketing competition. If movie production companies focus on movie production quality improvement then a creative competition would ensue.