• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.23-23
• /
• 2009

Recently, the nanowire configuration of GST showed nanosecond-level phase switch at very low power dissipation, suggesting that the nanowires could be ideal for data storage devices. In spite of many advantages of IST materials, their feasibility in both thin films and nanowires for electronic memories has not been extensively investigated. The synthesis of the chalcogenide nanowires was mainly preformed via a vapor transport process such as vapor-liquid-solid (VLS) growth at a high temperature. However, in this study, IST nanowires as well as thin films were prepared at a low temperature (${\sim}250^{\circ}C$) by metal organic chemical vapor deposition(MOCVD) method, which is possible for large area deposition. The IST films and/or nanowires were selectively grown by a control of working pressure at a constant growth temperature by MOCVD. In-Sb-Te NWs will be good candidate materials for high density PRAM applications. And MOCVD system is powerful for applying ultra scale integration cell.

• 한국전기전자재료학회논문지
• /
• 제30권6호
• /
• pp.376-380
• /
• 2017

In this paper, we prepared a metal alloy resistor with stable thermal electro motive force (thermal EMF) as well as a low temperature coefficient of resistance (TCR) by adjusting the manganese proportion from 3 to 12 wt% in the Cu-Mn-Ni alloy. Composition of the fabricated metal alloy was investigated using energy dispersive X-ray (EDX) analysis. The TCR of each sample was measured as 44.56, 40.54, 35.60, and 31.56 ppm for Cu-3Mn-2Ni, Cu-5Mn-2Ni, Cu-10Mn-2Ni, and Cu-12Mn-2Ni, respectively. All the resistor samples were available for the F grade (${\pm}1%$ of the allowable error of resistance) high-precision resistor. All the samples satisfied the baseline of high thermal EMF (under 3 mV at $60^{\circ}C$); however, Cu-3Mn-2Ni and Cu-5Mn-2Ni satisfied the baseline of low thermal EMF (under 0.3 mV at $25^{\circ}C$). We were thus able to design and fabricate the metal alloy resistor of Cu-3Mn-2Ni and Cu-5Mn-2Ni to have low TCR and stable thermal EMF at the same time.

• 한국식품조리과학회지
• /
• 제19권4호
• /
• pp.439-446
• /
• 2003

This study was performed to investigate the change in the chemical components of red pepper powder using different packaging materials and various storage conditions. Red pepper powders with 11 and 15% initial moisture content were packed with five different materials and stored at different temperatures (0, 20, and 30 C) for a one year period. Over the storage period, each combination was periodically sampled, and examined for composition changes. The five packaging materials were: linear low density polyethylene(LLDPE), nylon/LLDPE(Ny/LLDPE), saran coated ethylene vinyl acetate copolymer/linear low density polyethylene(B650), nylon/Tie/nylon/ethylene-vinyl alcohol copolymer/nylon/Tie/LLDPE(RDX-2787) and oriented polypropylene/alumimum/LLDPE(OPP/Al/LLDPE), and the three storage conditions were (28.3${\pm}$1.0)$^{\circ}C$ with (15.5${\pm}$2.8)% relative humidity, (18.6${\pm}$0.5)$^{\circ}C$ with (46.6${\pm}$4.9)% RH, and (0${\pm}$2)$^{\circ}C$ with (80${\pm}$10)% RH, respectively. The moisture contents of all samples changed according to the relative storage humidity, except those of the samples packed with OPP/Al/LLDPE, which remained constant throughout the storage period. The capsaicinoids content of the red pepper powder did not change significantly for 6 months, but gradually decreased after that until about 85% of the original amount remained at the final stage of storage. The ASTA color values of all samples decreased gradually throughout the storage period. The higher the storage temperature, the more severe the deterioration. The color deterioration seemed greatly related to the existence of oxygen, as the deterioration was especially severe in the samples packed with LLDPE and B650, where the oxygen transmission rate were highest among the five packaging materials.

• 한국재료학회지
• /
• 제22권3호
• /
• pp.159-167
• /
• 2012

Hydrogen is in the spotlight as an alternative next generation energy source for the replacement of fossil fuels because it has high specific energy density and emits almost no pollution, with zero $CO_2$ emission. In order to use hydrogen safely, reliable storage and transportation methods are required. Recently, solid hydrogen storage systems using metal hydrides have been under extensive development for application to fuel cell vehicles and fuel cells of MCFC and SOFC. For the practical use of hydrogen on a commercial basis, hydrogen storage materials should satisfy several requirements such as 1) hydrogen storage capacity of more than 6.5wt.% $H_2$, moderate hydrogen release temperature below $100^{\circ}C$, 3) cyclic reversibility of hydrogen absorption/desorption, 4) non toxicity and low price. Among the candidate materials, Li based metal hydrides are known to be promising materials with high practical potential in view of the above requirements. This paper reviews the characteristics and recent R&D trends of Li based complex hydrides, Li-alanates, Li-borohydrides, and Li-amides/imides.

• 한국세라믹학회지
• /
• 제55권3호
• /
• pp.203-223
• /
• 2018

The development of two-dimensional graphene layers has recently attracted considerable attention because of its tremendous application in various research fields. Semi-metal materials have received significant attention because of their excellent biocompatibility as well as distinct physical, chemical, and mechanical properties. Taking into account the technical importance of graphene in various fields, such as complementary metal-oxide-semiconductor technology, energy-harvesting and -storage devices, biotechnology, electronics, light-emitting diodes, and wearable and flexible applications, it is considered to be a multifunctional component. In this regard, material scientists and researchers have primarily focused on two typical problems: i) direct growth and ii) low-temperature growth of graphene. In this review, we have considered only cold growth of graphene. The review is divided into five sections. Sections 1 and 2 explain the typical characteristics of graphene with a short history and the growth methods adopted, respectively. Graphene's direct growth at low temperatures on a required substrate with a well-established application is then precisely discussed in Sections 3 and 4. Finally, a summary of the review along with future challenges is described in Section 5.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2004년도 하계학술발표 논문집
• /
• pp.79-79
• /
• 2004

• Journal of the Korean Wood Science and Technology
• /
• 제35권2호
• /
• pp.61-68
• /
• 2007

The applicable scope of adhesives in the current society is broad and currently, several types of PVAc resin are sold in the market for adhesives. PVAc resin is primarily used for wood works and paper adhesion. However, the PVAc resin itself has the disadvantages that its viscosity is highly temperature- dependent and the work condition and viscosity get worse at the low temperature in the winter seasons. Although phthalate-based plasticizer is used to complement these disadvantages, adhesion strength and heat-resistance are weakened by adding the phthalate-based plasticizer and in the winter period, the amount of quantity should be increased. Also in a high-density product, it worsens the work condition by causing a rise of viscosity and delays curing and in a low-density product, it worsens the storage stability by causing separate precipitation. In addition to these, the phthalate-based plasticizer as a material of causing environmental hormones is currently restricted in the advanced countries for its amount of use and also in the domestic market, it is necessary to prepare for the situation. This study has not only eliminated the disadvantages of PVAc resin emulsion without adding a phthalate-based plasticizer of causing these problems, but also synthesized the PVAc resin for timber adhesion that is excellent in woodwork, thermal-resistance, water-resistance, storage stability, and adhesion performance. As the result, it has proven an excellent performance in thermal resistance, water resistance, storage stability, and minimum film forming temperature.

• 한국재료학회지
• /
• 제17권4호
• /
• pp.192-197
• /
• 2007

The effects of immersion time in the liquid nitrogen on the behavior of aluminum alloys used for the hydrogen storage tank of auto-mobile at cryogenic temperature were investigated. With increasing immersion time in the liquid nitrogen, the elongation of AI 5083 alloy at cryogenic temperature decreased because of non-uniform fracture of precipitates on the grain boundary, and the serration also occurred because of discontinuous slip due to rapid decreasing of the specific heat. The mechanical properties of AI 6061 alloy at cryogenic temperature were characterized by uniformed yield strength, tensile strength and elongation regardless of the immersion time in the liquid nitrogen. These mechanical properties of aluminum alloys at cryogenic temperature were interpreted by the strength of grain boundary and the slip deformation behavior.

• Journal of the Korean Wood Science and Technology
• /
• 제46권3호
• /
• pp.213-220
• /
• 2018

리기다소나무를 구조용 집성재의 재료로 이용하기 위해 판면의 옹이와 대패가공 후 방치시간에 따른 수지 삼출량이 레조르시놀수지로 접착한 판재의 접착성능에 미치는 영향을 검토하였다. 고온($120{\sim}95^{\circ}C$) 및 저온($65{\sim}50^{\circ}C$)에서 건조한 리기다소나무의 수지 삼출량은 판목면이 정목면 보다 저온건조재가 고온건조재보다 많았다. 방치시간별로는 저온건조재는 3일째 고온건조재는 7일째에 최고함량을 보였고, 이후부터는 서서히 감소하여 15~90일에는 거의 차이가 없었다. 접착성능은 수지의 삼출이 많은 2~3일까지는 낮았으나 15일 이후에는 큰 차이가 없었으며, 고온 및 저온 건조재 모두 방치시간에 관계없이 KS 기준의 접착성능을 만족하였다. 옹이부가 포함된 적층 구성에서의 접착강도는 KS의 접착강도 기준 이상이었으나 목파율은 기준인 65% 이상을 만족하지 못하였다. 적층 단면구성(정목+정목, 판목+판목, 정목+판목)에 따른 접착성능은 고온 및 저온건조재 모두 모든 적층구성에서 KS의 기준을 크게 상회하였다.

• Food Science and Biotechnology
• /
• 제18권6호
• /
• pp.1392-1397
• /
• 2009

This study was aimed at developing a low cost cold storage system for agricultural products. Three kinds of slurries: $K_1$, $K_2$, and $K_3$ slurries were developed using phase change materials (PCMs) such as tetradecane, octadecane, and sodium polyacrylate to maintain the desired temperature ranges. The slurries were manufactured by in-situ polymerization. Tetradecane and octadecane were capsulated in a core with melamine at the surface. The thermodynamic characteristics of the slurries were measured and analyzed. The latent heats of the $K_1$, $K_2$, and $K_3$ slurries at the melting points were 206.41, 186.88, and 147.91 kJ/kg, respectively. A transportable cold storage container was built to investigate the performance of the slurries as thermal storage media. The temperatures at the insides of the container could be maintained in the ranges of 0-5, 5-10, and $10-15^{\circ}C$ for more than 23, 27, and 60 hr with the $K_1$, $K_2$, and $K_3$ slurries, respectively.