• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.1
• /
• pp.46-56
• /
• 2002

The low temperature, low salinity and low density sea water which was originated from the southern part of the Yellow Sea and distributed from the surface to 20 m depth was transported by the northwesterly wind during the period from the middle of March to the beginning of April, 1998 and had an influence on the northern coastal sea area of Cheju Island. Accordingly, this kind of accumulated data may supply the fundamental data for the realtime monitoring of oceanographic conditions and may improve degree of the forecasting accuracy of fishing and oceanographic conditions.

• The Journal of Fisheries Business Administration
• /
• v.42 no.3
• /
• pp.79-93
• /
• 2011

Water temperature of Oliver flounder farm affects Oliver flounder growth and mortality rate. In laboratory experimental tanks, optimal water temperature was $22.5^{\circ}C$($21{\sim}24^{\circ}C$) and cultivatable water temperature was $12{\sim}28^{\circ}C$. The purpose of this study is to identify applicable and useful water temperature of Oliver flounder farm in case of actual farming. The data applied in the analysis was collected from Jeju island. In the study, various analytical methods including productivity analysis, regression analysis, statistical analysis were conducted for 13 Oliver flounder culture farms. The result of analysis can be summarized as follows : First, growth rate on the Oliver flounder culture farms was related to mean of water temperature, variation of water temperature and low water temperature. Second, survival rate on the Oliver flounder culture farms was related to mean of water temperature. In case of including Oliver flounder stocking density, defined as the surface area of Oliver flounder per $m^2$ of water surface area, survival rate strongly related to mean of water temperature, variation of water temperature, cultivating capability and stocking density. Third, production weight per $m^2$ of water surface area was strongly related to mean of water temperature, low water temperature and cultivating capability. Growth rate and survival rate was analyzed into mediate variable character.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.2
• /
• pp.119-123
• /
• 2014

In this study, four kinds of specimens of PE(polyethylene)-based insulating materials were prepared for selecting the optimum insulation materials in a wet environment. The specimens were tested by various methods, the anti tracking test, the transmittance test in the water vapor transmittance(WVT) and the abrasion resistive test, etc. The HDPE(high-density polyethylene) specimen was showed excellent property in the tracking resistance test and the lowest transmittance in water vapor transmittance test. In the abrasion resistive test, the LLDPE(linear low-density polyethylene) and MDPE(medium-density Polyethylene) were showed excellent mechanical properties. The value of cut-through resistance for MDPE and HDPE were superior to that for LLDPE and LDPE(low-density polyethylene).

• Journal of environmental and Sanitary engineering
• /
• v.16 no.2
• /
• pp.38-46
• /
• 2001

In this work, the heterogeneous ion exchange membrane was used in a electrodialysis apparatus to treat a Ni planting rinse water because the heterogeneous ion exchange membrane was excellent efficiency as compared with low manufacturing cost, was easy to make, and had a good mechanical properties. For a regeneration of membrane and to obtain the optimal condition for a scale-up of apparatus after treating Ni plating rinse water, we would find about the limiting current density and the concentration polarization. When the Ni plating rinse water 150mg/L was treated with the electrodialysis apparatus using the heterogeneous ion exchange membrane, the limiting current density was about $1.49{\;}mA/\textrm{cm}^2$. And the limiting current density increased with the flow rate and concentration of Ni plating rinse water. We recognized that the used membrane could be reused by periodic backwashing because efficiency was constant when the membrane was backwashed after treating wastewater.

• Ocean and Polar Research
• /
• v.29 no.1
• /
• pp.33-42
• /
• 2007

To obtain the overall distribution patterns and characteristics of the East Sea Intermediate Water (ESIW), the historical data obtained by the Japan Maizuru Marine Observatory (MMO) and the Korea Ocean Research and Development Institute (KORDI) were analyzed. To obtain water characteristics of the ESIW on isopycnal surfaces, temperature, salinity and dissolved oxygen were interpolated at every 0.01 interval of potential density. And then the interpolated values were averaged at the same potential density. This potential density average method preserved the salinity minimum layer more clearly compared to the depth average method. The potential density(${\sigma}_{\theta}$) range of the ESIW was $26.9{\sim}27.3$. The representative potential density of the ESIW was found to be 27.2, because the characteristics of the ESIW was clear at this density. From the horizontal distributions of physical properties on the isopycnal surface of $27.2{\sigma}_{\theta}$ it is suggested that the low salinity ESIW circulates anticlockwise over the whole basin with the high salinity intermediate water. The low salinity intermediate water extended from the northwestern part to the east along the sub-polar front and to the Ulleung Basin along the east coast of Korea.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.1
• /
• pp.151-165
• /
• 1996

Relation between condensate retention and heat transfer performance is studied for condensation of CFC-11 on horizontal integral-fin tubes. Eight tubes with trapezoidally shaped integral fin density from 738fpm to 1654fpm and 10, 30 grooves are tested. The liquid retention angles are measured by the height gauge, and each tube is tested under static(non-condensing) condition (CFC-11, water) and under dynamic(condensing) condition (CFC-11). The analytical model predicts the amount of liquid retention on a horizontal integral-fin tubes within＋10 percent over most of the data. Average retention angle increases as both surface tension-to-density ratio($\sigma/\rho$) and fin density(fpm) increase, The tube having a fin density of 1299~1654fpm has the best heat transfer performance. The amount of surface flooding must keep below of 40 percent for best heat transfer performance at condensation. The tube having low number of fin density must be used for fluids having high values of $\sigma/\rho$(water, (TEX)$NH_3$, ect.) and the tube having high number of fin density must be used for the fluid having low values of $\sigma/\rho$(R-11, R-22, etc.)

• Korean journal of food and cookery science
• /
• v.16 no.6
• /
• pp.623-628
• /
• 2000

The antioxidative effect of mugwort extracts was measured by DPPH and LDL with four different solutions (70% acetone, ethanol, hot water, cold water). Mugwort extracts contained 3.2% of polyphenol, 380 RE/l00 g of vitamin A, 16.2 mg/100 g of vitamin C, and 5.1 ${\alpha}$-TE/100 g of vitamin E. DPPH revealed the effect in the order of 70% acetone, hot water, ethanol, and cold water. In particular, 70% acetone showed outstandingly stronger activity than the control group. Also, when 10 ${\mu}\ell$ was added, the effect was well noticed. But the antioxidative activity was hardly seen at 15 ${\mu}\ell$. LDL exhibited the same order of strength in proportion to mugwort＇s concentration. Against the control group, the activity of 70% acetone was 7 times, hot water and ethanol 6 times, and cold water 2 times. This result is attributable to the antioxidative increase of polyphenol and antioxidative vitamins.

• Ocean and Polar Research
• /
• v.42 no.4
• /
• pp.271-281
• /
• 2020

We investigated mesozooplankton in the Yellow Sea in spring to understand its community structure and relationship with environmental factors. Total mesozooplankton density ranged from 1,542 to 7,367 ind. m-3 and the biomass ranged from 3 to 42 mg C m-3. The total density and biomass had a positive relationship with chlorophyll-a (chl-a) concentration. The mesozooplankton community was divided into two groups at 125.5 E by cluster analysis: one was an inshore group and the other was an offshore group. The inshore group of mesozooplankton was of high density but low diversity, while the offshore group was of high diversity but low density. Copepod Acartia hongi and its copepodites were the most abundant species, comprising 27.8% of the total mesozooplankton density. A. hongi was especially abundant at the inshore, serving as the indicator species of the inshore group. Redundancy analysis found a positive relationship between the density of A. hongi and chl-a concentration. Oithona similis and Centropages abdominalis were 2nd and 3rd dominant species comprising 9 and 7% of the total density, respectively. The density of O. similis was positively related to water depth, but C. abdominalis was related to chl-a concentration. Chl-a concentration seems to influence significantly the mesozooplankton community structure in the Yellow Sea in spring, rather than water temperature or salinity.

• Journal of Korean Society on Water Environment
• /
• v.36 no.5
• /
• pp.392-404
• /
• 2020

The focus of this study was to quantify the thermal stratification and analyze the relationship between the stratification structure and the tributaries to understand flow variations in the Paldang Reservoir. The vertical distribution of the temperature and density gradients, and the depth and thickness of the thermocline were quantitatively calculated using a lake physics tool (rLakeAnalyzer) and high-frequency monitoring data. Based on a density gradient of 0.2 kg/㎥/m, the thermocline was formed from mid-May to early-September 2019 and the other periods were weakly stratified or mixed. The thickness of the thermocline was developed until 4.7 m and the depth of the thermocline was formed at a depth of 3 - 6 m at the front of the Paldang Reservoir. During the formation of the thermocline, the Namhangang and Gyeongancheon tributaries with relatively high water temperature (low-density) flowed into the upper layer of the reservoir, and the Bukhangang tributary with low water temperature (high-density) mainly affected the lower layer of the reservoir. This is because the density currents were formed due to the difference in the water temperature of the tributaries. The findings of this study may be used for constructing high-frequency monitoring and quantitative data analyses of reservoirs.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.213-217
• /
• 2005

In this study the water including sediment is assumed that the density is different from fresh water. And the phenomenon inhaled by low pressure around the pipe is numerically simulated in two dimension. The simulation is done using finite difference method in rectangular staggered mesh system and Navier-Stokes equations and continuty equation are employed as governing equations. The method of Irregular leg lengths and stars are adopted to satisfy boundary condition of body boundary. Marker-Density method is used to calculate the density of mixed flow. Also SGS turbulence model is applied to consider vortex smaller then grid at high Renolds number. This study is to analyze inhalation phenomenon of mixed flow with sediment and to verify the numerical method for mixed flow. To verify the numerical results are compared with experimental results