In this paper, the dielectric properties of epoxy composites used for transformers are studied. The dielectric permittivity and loss of specimen are measured at the frequency range of 30[Hz]∼1[MHz] about temperature 20[$^{\circ}C$],100[$^{\circ}C$] and 140[$^{\circ}C$] respectively from a series of experiments. When the filler is added, between epoxy and silica is formed interface. Therefore, observed higher values of dielectric permittivity and loss in filled epoxy are attributed to MWS polarization effect. Also, glass transition temperature was shifted to higher temperature and value of dielectric permittivity and loss were decreased due to 2nd curing. Deformation of interfacial state is improved and value of dielectric permittivity and loss were decreased at low frequency region by the surface treatment of fillers with silane coupling agents.
This experimental study investigate temperature dependency affecting setting and strength development of concrete using mineral admixtures such as CKD, FA and BS. For the properties of setting at $5^{\circ}C$, setting time of concrete with mineral admixture was delayed about $3\~14$ hour compared with that of plain concrete. Use of CKD had a desirable effect on reducing setting retard under $5^{\circ}C$ because of $CaCO_3$ of CKD while use of FA and BS retarded setting time greatly. For compressive strength under $5^{\circ}C$, concrete with CKD had the most compressive strength in early age compared with the other mineral admixtures but exhibited slight strength loss in $-5^{\circ}C$ at 28days. Especially, concrete with FA and BS was observed in early stage at low curing temperature because of strength loss remarkably in $-5^{\circ}C$.
Ethephon을 이용하여 현행 잎담배 건조법을 개선해 보고저 우리나라 담배 제조용 주요품종인 Yellow Special A와 Coker를 논에 재배하고 성숙기에 4수준의 Ethephon액을 살포함으로서 Ethephon의 건조에 미치는 생리적 효과를 조사하였던 바 아래와 같은 결과를 얻을 수 있었다. 1. 처리잎은 무처리잎에 비하여 성숙중에 현저한 엽록소의 분해를 일으켰다. 따라서 황변(성숙)이 촉진되었으나 처리수준 사이에는 큰 차가 없었다. 2. 성숙과정에서 처리잎은 무처리잎에 비하여 탈수율이 높았던 관계로 수확시 이미 수분함량이 약 10% 적었다. 그러나 처리수준 사이에는 탈수율에 큰 차가 없었다. 같은 조건하에서 건조할 때는 처리잎의 건조가 하루(1일) 앞당겨졌다. 3. 건조과정에서는 처리잎에서보다 무처리잎에서 엽록소의 분해가 더 크게 일어났다. 따라서 건조완료된 잎담배의 황색도는 처리잎이나 무처리잎이나 비슷했다. 4. 건조과정에서 처리잎은 무처리잎에 비하여 전 Alkaloid함량이 현저히 감소되었으나 당전분 및 전질소함량에는 큰 변화가 없었다. 따라서 Ethephon처리로 인하여 잎담배 품질이 저하된다고 보이지 않았다. 5. 처리잎은 이미 성숙기에 황변이 촉진되었을 뿐 아니라 탈수도 많이 되었던 관계로 증효기 및 신장기를 생략한 황변기, 색택고정기 및 중골건조기의 3단계로서 건조를 끝낼 수 있었다. 6. 처리된 잎담배의 수량이 2% 감소된 셈이다. 처리잎은 관행건조소요시간(100시간)의 40%를 단축하여 건조할 수 있었음으로 연료비가 50%가량 절약되었다. 7. Ethephon처리로 말미암아 담배 성숙 및 건조 시간이 단축되었기 때문에 수확 및 건조에 요하는 비용을 대폭 절감할 뿐 아니라 금후 담배의 기계수확 및 집단건조도 가능하게 될 전망이 보였다. 따라서 Ethephon을 담배 농사에 이용하면 담배 생산농가의 노력 및 시설을 더욱 효과적으로 활용하여 소득을 증대시키는데 큰 도움을 준다고 믿게 되었다.
동절기 공사시에는 낮은 외기온에 기인하여 콘크리트의 조기강도 발현이 취약하게 된다. 특히, 동절기 공사중, 외부의 절취면을 대상으로 Nail를 삽입함으로서 사면 전체를 일체화시키는 Soil Nailing 공법을 적용하는 경우에는 낮은 외기온에 기인한 Shotcrete의 강도발현에 많은 어려움이 있을 것으로 예상되고 있다. 따라서, 본 연구에서는 상기의 어려움을 해결할 목적으로, 시멘트 생산공정 중 부수적으로 발생되는 초미립자 시멘트(이하 미립자 시멘트라 칭함)를 이용하여 동절기 Shotcrete공사의 조기강도 발현성능을 확보하고자 하였다. 실험결과, 외기온이 최저 $-9^{\circ}C$의 극저온 조건이라 할지라도 미립자 시멘트를 100% 사용하면서, 간단한 비닐보양 양생을 실시한다면 약 5일 정도의 단기재령만으로도 설계기준강도를 만족하는 우수한 품질의 Shotcrete를 경제적으로 제조 할 수 있는 것으로 나타났다.
고로슬래그 시멘트의 저온 조기 강도를 증진키 위하여 고로슬래그의 분말도를 높이고 낮은 물:시멘트 비(W/C)의 혼합수량을 사용하였다. 분쇄조제를 사용하여 6,280$\textrm{cm}^2$/g(Blaine)로 미분쇄한 고로슬래그를 일반 포틀랜드 시멘트와 혼합하여 고로슬래그 40%의 고로슬래그 시멘트를 만들었다. 그리고 시판의 naphthalene계 고성능감수제를 사용하여 혼합수량을 W/C=0.50(KS L 5105)에서 W/C=0.33으로 저하시킬 수 있었다. 상술한 방법을 통하여 고로슬래그 시멘트의 저온 조기 강도를 포트랜드 시멘트 강도보다 오히려 더 높게 향상시킬 수 있었으며, 기공구조 및 임피던스 분석의 방법으로 본 시멘트의 미세구조를 조사하였다.
콘크리트의 초기동해는 응결과정이거나 종결 후에도 충분한 강도발현이 되지 않은 단계에서 콘크리트중의 수분이 동결함에 따라 발생하는데, 초기동해를 방지하기 위해서는 콘크리트가 동결하기 이전에 일정강도를 조기에 발휘하는 것이 필요하다. 따라서, 이에 대한 많은 대처방안이 제시되고 있는데, 최근에는 내한촉진제를 사용하는 방법이 검토되고 있다. 따라서, 본 연구에서는 내한촉진제를 혼합한 콘크리트의 실무 활용 가능성을 검토할 목적으로 콘크리트 단계에 앞서 모르터 단계에서 내한촉진제의 동결온도, 응결시간 및 염화물량 등을 측정하고, 아울러 정온 및 변온조건에서 양생한 모르터의 강도특성도 검토함으로서 내한 촉진제를 사용한 한중콘크리트의 개발에 기초자료를 제시하고자 하였다. 연구결과, 내한촉진제를 혼합한 모르터의 동결온도는 내한촉진제의 사용량이 증가할수록 낮아지는 반면, 촉진형 감수제의 경우는 동결온도 저하에 거의 영향이 없는 것으로 나타났으며, 응결특성은 양생온도가 낮을수록, 내한촉진제의 응결촉진 효과가 우수한 것으로 평가되었다. 염화물량은 공히 KS F 4009의 관리규준을 만족하고 있었다. 강도증진성상은 내한촉진제를 혼합한 경우, 로지스틱 곡선식을 이용한 강도증진해석 결과와 거의 유사한 것으로 나타난 반면, 정온조건으로 영하5$^{\circ}C$이고, plain과 촉진형 감수제를 사용한 경우는 강도증진해석 결과의 표준오차가 상대적으로 매우 크게 나타나, 강도증진해석을 목적으로 사용되는 로지스틱 곡선이나 적산온도와 압축강도의 관계에서 적용성이 매우 적은 것으로 평가되었다. 한편 내한촉진제를 혼합한 모르터의 압축강도가 5.0 N/$\textrm{mm}^2$을 발휘하게 되는 적산온도는 각각 20~30$^{\circ}$CD(K), 30~40$^{\circ}$CD(B), 40$^{\circ}$CD(S)이후인 것과 같이 내한촉진제의 종류에 따라 크게 상이한 것으로 나타났다. 정온 및 변온양생조건에 따른 한중콘크리트의 압축강도는 동일 적산온도라 할지라도 정온조건보다는 변온조건이 더 유리한 것으로 나타났다.
한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
/
pp.235-235
/
2006
Triphenylamine derivatives play important roles as hole transporting materials in organic light emitting devices. However, low molecular weight triphenylamine derivatives show low glass transition temperature and aggregation behavior, and the vapor deposition step of low molecular weight materials is incompatible with large area display fabrication. Conventional polymer PEDOT-PSS HTL has serious drawbacks such as the ITO anode corrosion, poor surface energy match with aromatic EMLs. To solve these problems, we introduced crosslinkable units to triphenylamine-based polymers to make insoluble HTL by thermal curing following spin-coating. Electrochemical and optical properties of the new hole transporting materials were investigated. In addition, the device characteristics obtained with new hole transporting polymers were investigated in details.
The UV nanoimprint technology uses the UV light as the energy source. Because the imprint process is carried out in room temperature and low pressure, this technology has its own merits compared to the thermal nanoimprint. However, in UV nanoimprint technology, a resin which has low viscosity is essential for the improvement of accuracy. In this research, a resin (named as IMS01) which has relatively low viscosity was developed. And a measurement system was developed in order to measure the degree of cure of the resin. The measurement system which is composed of FT-IR, UV light source and optical guide can measure the degree of cure in real time. From the experimental results, it was found that the IMS01 is cured more rapidly than existing resin (PAK01).
본 연구는 기존의 농가 보급형 고구마 저장고에 가열기(본체), 환기팬, 배풍구 팬, 습도 조절을 위한 관으로 구성된 간이 큐어링 설비를 부가시킨 후, 그 효과를 검증하기 위하여 수행되었다. 6일간의 큐어링 처리 기간 동안 저장고 내 기온 및 상대습도는 $32^{\circ}C$, 90%로 설정되었다. 고구마의 저장 기간(6 개월) 동안 1개월에 1회씩 표본을 수집하여 물리화학적 품질을 측정한 결과, 부패율과 부패 정도를 함께 보여주는 McKinney Index는 큐어링 처리구의 경우 0.83%였으며, 큐어링 처리를 하지 않은 대조구의 경우 5.08%였다. 큐어링 처리구의 경도 및 당도, 건물율은 모두 대조구보다 높았으며, 대조구의 표피색이 큐어링 처리구보다 빠르게 변하여 큐어링 처리가 저장기간 동안 고구마의 변색을 지연시켰음을 알 수 있었다. 본 연구를 통하여 간이 큐어링 설비를 이용한 큐어링 처리는 초기 비용이 많이 소모되는 일반 큐어링 설비를 대체하여 고구마의 물리화학적 품질을 증진시킬 수 있으며, 저장 기간을 늘릴 수 있음을 알 수 있었다.
In this study, the characteristics of temperature history was evaluated for three hot wires with different capacity installed in slab concrete which are relatively thin. Results can be summarized as follows. First, for the case of material using 5W hot wire, all decreased to below zero at or around 24 hours. Similarly, the material using 20W hot wire decreased to 2℃ below zero at or around 80 hours but satisfied the accumulative temperature of 45° D·D at 7 days of material age. On the other hand, the case of 30W hot wire, the biggest capacity, showed the high temperature history of 5℃ in average at all areas except the corners. Thus, the target accumulative temperature was secured at or around the 3 days of material age. Considering the above, the initial damage by freezing can be prevented only if 20W or higher hot wires are used for the slabs at -10℃ of extremely low temperature environment.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.