• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.305-310
• /
• 2012

Planetary gear box is a power transmitter having very high gear ratio in compact volume. The planetary step-down gear box converts high speed and low torque into low speed and high torque, which is widely used in constructional and industrial machinery field. And, the planetary step-up gear box does vice versa working, which is used as main gear box of large sized wind mill system. The large sized planetary gear box must be performed the normal-opposite rotation test as a its durability test for achieving the reliability. The large sized planetary gear box is composed by triple gear trains of sun gear, carrier, and ring gear. If input power is supplied into one of them and the other is fixed, and then another becomes the output part. In this paper, we designed a new test equipment which can do rapid normal and opposite rotational change with only small displacement by supplying test power using the above rotation (driving) characteristics and hydraulic cylinder and link, and also compared and analyzed with existing method through various experiments.

• 한국산학기술학회논문지
• /
• 제8권3호
• /
• pp.437-443
• /
• 2007

본 논문에서는 임베디드 프로세서 및 네트워크 구조를 기반으로 구성된 NoC(Network-On-Chip)의 저전력 테스트 구조를 제안한다. 임베디드 프로세서와 여러개의 코어로 구성된 네트워크 구조에 벤치마크 회로를 직접 연결하여 테스트 전력소모를 평가하였으며, 각 코어의 테스트 패턴을 저전력 소모가 되도록 매핑하여 테스트 전력소모를 감소시켰다. 또한 임베디드 프로세스 코어를 ATE(Automatic Test Equipment)로 사용하여 테스트 시간을 줄일수 있었다. ISCAS89 벤치마크 회로에 대해서 테스트 시간은 매우 효과적으로 감소되었으며 평균 전력소모는 약 8%가 감소되었다.

• 동력기계공학회지
• /
• 제14권6호
• /
• pp.29-34
• /
• 2010

As the steam temperature of fossil power plant boiler is increasing, the use of 9Cr-1Mo high alloy material is prevalent and it is needed to investigate the characteristics of low cycle fatigue for high alloy and austenite stainless steel that has used up to recently. As a result of test, in 9Cr-1Mo high alloy steel, the relation of strain and fatigue life is non-linear and the crack mode of low cycle fatigue is brittle but in the austenite stainless steel, that of strain and fatigue life is linear and the crack mode of low cycle fatigue is ductile. Comparing the fatigue life between high alloy and austenite stainless steel, there is no consistent characteristics as to strains. But the fatigue life of 9Cr-1Mo steel is longer by 25% than that of STS304 stainless steel in the relatively low, 0.3% strain. In the other strain, the fatigue life of two materials is similar.

• Corrosion Science and Technology
• /
• 제15권5호
• /
• pp.245-252
• /
• 2016

The pipelines and equipments are degraded by flow-accelerated corrosion (FAC), and a large-scale test facility was constructed for simulate the FAC phenomena in secondary coolant environment of PWR type nuclear power plants. Using this facility, FAC test was performed on weld pipe (carbon steel and low alloy steel) at the conditions of high velocity flow (> 10 m/s). Wall thickness was measured by high temperature ultrasonic monitoring systems (four-channel buffer rod type and waveguide type) during test period and room temperature manual ultrasonic method before and after test period. This work deals with the complex effects of flow velocity on the wall thinning in weld pipe and the test results showed that the higher flow velocity induced different increasement of wall thinning rate for the carbon steel and low alloy steel pipe.

• KEPCO Journal on Electric Power and Energy
• /
• 제4권1호
• /
• pp.19-24
• /
• 2018

가스터빈 동익에 대한 지속적인 국산화 개발이 추진되어, 국내 정밀 주조 기술을 향상시키고, 동익의 유지 보수 비용을 낮추는 등의 직간접적인 긍정적 효과를 가져왔지만, 여전히 국산화 개발품이 발전소에서 안정적인 실사용이 가능한지에 대한 우려가 존재한다. 향상된 소재와 주조기술을 바탕으로 조직학적, 기계적 성질에서 충분한 품질을 확보하였더라도, 개발품을 대상으로 다양한 신뢰성 검증이 요구되는 이유이다. 고속회전시험기는 로터, 디스크 등의 회전체에 원심력을 가하여, 이에 따른 제품의 특성을 분석하기 위한 시험장비로 일반적으로 과속도시험을 통한 최종적인 품질검사에 주로 사용된다. 본 논문에서는 전력연구원에 구축된 고속회전시험기를 활용한 가스터빈 동익에 대한 과속도시험을 포함한 저주기피로시험 사례를 중심으로 신뢰성 시험 및 평가 결과를 기술하였다.

• 대한전자공학회논문지SD
• /
• 제41권12호
• /
• pp.83-90
• /
• 2004

본 논문은 SOC의 테스트 데이터 압축과 전력소비를 단축시키기 위한 효율적인 스캔 테스트 방법을 제안한다. 제안된 테스트 방법은 deterministic 테스트 데이터와 그 출력응답을 분석하여 출력응답의 일부분이 차기에 입력될 테스트 데이터로 재사용될 수 있는지를 결정한다. 실험결과, 비압축된 deterministic 입력 테스트 데이터와 그 응답간에 높은 유사도가 있음을 알 수 있다. 제안된 테스트 방법은 ISCAS'89 벤치마크 회로를 대상으로 소요되는 클럭 시간을 기준으로 평균 29.4%의 전력소비단축과 69.7%의 테스트 데이터 압축을 가져온다.

• Journal of Preventive Medicine and Public Health
• /
• 제43권2호
• /
• pp.185-192
• /
• 2010

Objectives: We conducted a meta-analysis to investigate the relationship between low external doses of ionizing radiation exposure and the risk of cancer mortality among nuclear power plant workers. Methods: We searched MEDLINE using key words related to low dose and cancer risk. The selected articles were restricted to those written in English from 1990 to January 2009. We excluded those studies with no fit to the selection criteria and we included the cited references in published articles to minimize publication bias. Through this process, a total of 11 epidemiologic studies were finally included. A publication bias was tested for using Egger's test. The homogeneity test was performed before the integration of each of the standardized mortality ratios (SMRs) and the result proved that the studies were heterogeneous. Results: We found significant decreased deaths from all cancers (SMR = 0.75, 95% CI = 0.62 - 0.90), all cancers excluding leukemia, solid cancer, mouth and pharynx, esophagus, stomach, rectum, liver and gallbladder, pancreas, lung, prostate, lymphopoietic and hematopoitic cancer. The findings of this meta-analysis were similar with those of the 15 Country Collaborative Study conducted by the International Agency for Research on Cancer. A publication bias was found only for liver and gallbladder cancer (p = 0.015). Heterogeneity was observed for all cancers, all cancers excluding leukemia, solid cancer, esophagus, colon and lung cancer. Conclusions: Our findings of low mortality for stomach, rectum, liver and gallbladder cancers may explained by the health worker effect. Yet further studies are needed to clarify the low SMR of cancers, for which there is no useful screening tool, in nuclear power plant workers.

• Nuclear Engineering and Technology
• /
• 제28권3호
• /
• pp.265-273
• /
• 1996

Among those tests performed during the Yonggwang Nuclear Power Plant Units 3 and 4 (YGN 3&4) Power Ascension Test period, the Loss of a Main Feedwater Pump test at l00% power is one of the major test which characterize the capability of YGN 3&4. In this event, one of the two normally operating main feedwater pumps is tripped resulting in a 50% reduction in the feedwater flow. Unless the NSSS and Turbine/Generator control systems actuate properly, the reactor will be tripped on low SG water level or high pressurizer pressure. The test performed at Unit 3 was successful by meeting all acceptance criteria, and the plant was stabilized at a reduced power level without reactor trip. The measured test data for the major plant parameters are compared with the predictions made by the KISPAC computer code, an updated best-estimate plant performance analysis code, to verify and validate its applicability. The comparison results showed good agreement in the magnitude as well as the trends of the major plant parameters. Therefore, the KISPAC code can be utilized for the best-estimate nuclear power plant design and simulation tool after a further verification using other plant test data.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.640-648
• /
• 2014

Excessive power dissipation is one of the major issues in the testing of VLSI systems. Many techniques are proposed for scan test, but there are not so many for logic BIST because of its unmanageable randomness. This paper presents a novel low switching activity BIST scheme that reduces toggle frequency in the majority of scan chain inputs while allowing a small portion of scan chains to receive pseudorandom test data. Reducing toggle frequency in the scan chain inputs can reduce test power but may result in fault coverage loss. Allowing a small portion of scan chains to receive pseudorandom test data can make better uniform distribution of 0 and 1 and improve test effectiveness significantly. When compared with existing methods, experimental results on larger benchmark circuits of ISCAS'89 show that the proposed strategy can not only reduce significantly switching activity in circuits under test but also achieve high fault coverage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권3호
• /
• pp.167-181
• /
• 2001

A stepwise driving method was used for reducing the AC power consumption in a TFT-LCD. The AC power takes the largest portion of the total power consumption of a TFT-LCD. Experimental results confirmed that the AC power saving efficiency reached up to 75% when a 5-stepwise driving with each step time of $2\mu$ sec was applied to a 14.1 inch-diagonal XGA TFT-LCD. The second largest component of power consumption called the DC power comes from the quiescent currents in Op-amps. A simple and efficient architecture was proposed in this work to reduce this DC power consumption: Half of the Op-amps have the 5V-supplies, and the rest half have the 10V-supplies, and two Op-amps are shared by adjacent two channels. Measurements of test circuits showed that this simple method could reduce over 40% of the DC power consumption..