• 산업기술연구
• /
• 제25권B호
• /
• pp.73-80
• /
• 2005

Durability of concrete structures is seriously compromised by cracking at early-age concretes, particularly in high-strength or high-performance concrete structures. Since early-age cracking is influenced by various factors that affect the hydration process, early-age shrinkage and stress/strain development, the behavior at early-age is highly complex and no rational methodologies for its control have yet been established. Concrete structures often present volumetrical changes particularly due to thermal and moisture related shrinkages. Volumetric instability is detrimental to the performance and durability of concrete structures because structural elements are usually restrained. These restrained shrinkages develope tensile stresses which often results in cracking in combination with the low fracture resistance of concrete. Early-age defects in high-performance concrete due to thermal and autogenous deformation shorten the life cycle of concrete structures. Thus, it is necessary to examine the behavior of early-age concrete at the stages of design and construction. The purpose of this study was to propose a shrinkage models of VES-LMC (very-early strength latex-modified concrete) at early-age considering thermal deformation and autogenous shrinkage.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.75-79
• /
• 2006

Recently, more highly effective construction materials are needed for the reasonable and economical structure system is required as the construction structures become more multi storied, large-sized and diversified. That is to say, the highly qualified concrete is positively promoted as a part of plan to establish the effective space according to the dead load of structures and diminish of segment profile and to build up the economic structures. However, the high strength concrete has the problems such high brittleness and low ductility. Specially, for the high strength concrete, it has different strength from normal concrete as the internal temperature goes up steadily due to high heat of hydration by the quantities of highly level of cement, so the concrete which is mixed with various miscible materials is used. As the development and study for high strength concrete (more than $100N/mm^2$) is under way actively and the strength of high strength concrete increases, the strength different from the existing high strength concrete of ten than $100N/mm^2$, but the study for this is not adequate and indefinite. In addition, the study and report to apply the strength expression and analysis results of internal structure. Therefore, this study is an experiment about using the miscible materials affects what happens to the longitudinal physical property.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.505-508
• /
• 2008

본 연구에서는 댐 보조 여수로 낙차공의 매스콘크리트 시공을 위하여 저발열 콘크리트 배합과 1m${\times}$1m${\times}$1m box 시험을 통하여 수화열에 의한 온도 상승 정도 및 압축강도 발현 특성을 비교 분석 하였다. 이를 위하여 콘크리트 배합은 총 4개의 배합을 실시하였다. 각 배합에 사용된 콘크리트는 제 1종 시멘트 콘크리트, 플라이애쉬 시멘트 콘크리트 그리고 삼성분계 시멘트 콘크리트 2종류이다. 각 box의 지정위치에서 수화열이 계측되었고, 온도 측정 결과를 바탕으로 두께 2.0m인 댐보조 여수로 낙차공에 대한 수화열 해석을 실시하였다. 본 논문에서는 이러한 일련의 실험 결과와 분석결과를 제시하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.108-113
• /
• 1993

The material for the machine tool structure should have high static stiffiness and damping in its property to improve both the static and dynamic performances. The static stiffness of a machine tool can be inceased by using either higher modulus material in the structure of a machine tool. However, the machine tool structrue with high stiffness but low damping is vulnerable to vibration at the resonance frequencies of the structure . For the high precision and highsped machine tool structure, therefore, the high damping capacity is most important in order to suppress vibration. The damping of a machine tool can not be increased by increasing the static stiffness. The best way to increase the damping capacity of the machine tool structure is to use a composite material which is composed of on material with high stiffness with low damping and another material with low stiffness with high damping. Therefore, in this paper, the bed of the ultra high precision grinding machine for mirror surface machining of brittle materials such as ceramics and composite materials was designed and manufactured with the epoxy concrete material. The epoxy concrete material was prepared by mixing epoxy resin with different size sands and gravels. The modulus, compressive strength, coefficient of thermal expansion, specific heat, and damping factor were measured by varying the compaction ratio, sizes and contents of the ingredients to assess the effect of the processing parameters on the mechanical properties of the material. Based of the measured properties, the prototype epoxy resin concrete bed for the mirror surface CNC grinding machine was designed and manufactured.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.433-436
• /
• 2006

This study is basic experiment for estimating influence of strength by curing temperature of concrete's heat of hydration and estimate relationship of compressive strength development by initial curing temperature factor, and then asume temperature factor which influence compressive strength development and for showing basic document of quality control. According to the result of managerial test pieces by the curing temperature factor high-curing temperature shows high strength on 3 day compare with low curing-temperature, shows higher strength than the piece of high curing temperature.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.259-260
• /
• 2010

본 연구는 저발열 콘크리트의 적용성 검토를 위한 기초적 시험으로서, 각각의 배합조건 및 규격별 물리적 성질 및 수화열 저감특성을 알아보고자 하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.47-52
• /
• 2000

Recently, it is very necessary the development of the manufacturing techniques for high strength concrete(HSC) for the large-scale size and good quality of civil structure. But, the manufacture and quality control of HSC of which shrinkage, heat of hydration and workability at construction filed are considered, is very difficult due to its low water-cement ratio and high quantity of unit cement content. In the present study, we tried to know and assess the influences of chemical and physical properties of cement on the material properties of HSC. We analyzed basic properties of 4 kinds of cement whose chemical and physical properties are different each other through various tests such as chemical analysis and mortal test. Also, we performed the assessment of the material properties of HSC for each dement by the test for the conditions of same mix design and similar compressive strength. From the results in the study, the assessment of the important quality factors of cement influencing the properties of HSC may be utilized to quality control of applied cement to manufacture the HSC of high quality.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.637-640
• /
• 2008

본 연구에서는 플라이애쉬가 다량 치환된 콘크리트 강도 발현과 수화열 특성에 대하여 연구를 수행하였다. 3수준의 W/B와 4수준의 플라이애쉬 치환률 및 2수준의 실리카흄 치환율을 실험 변수로 선택하였다. 콘크리트 배합에서 단위수량은 125kg/m$^3$으로 고정하였다. 결과로서 초기 재령에서는플라이애쉬 치환율이 증가하면서 재령 91일까지 압축강도가 점진적으로 감소하는 경향을 나타내었다. 그런데 강도를 고려하면, 적절한 플라이애쉬 치환율은 20%인 것으로 나타났는데, 이는 제 1종시멘트의 경우에 비하여 낮은 값이다. 콘크리트의 인장강도는 압축강도의 0.72승에 비례하는 것으로 나타났다. 그리고 콘크리트 표준 시방서에 제시되어 있는 인장 강도 식은 압축강도가 낮은 경우에과대평가하고, 압축강도가 높은 경우에 과소평가하는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.889-892
• /
• 2008

본 연구는 보통포틀랜드 시멘트(이하 OPC)의 제조공정 중 입도 분급에 의해 포집된 조분시멘트(이하 CC)와 저발열 혼화재료인 플라이애시(이하 FA)를 조합 치환하여 콘크리트에 미치는 수화발열특성에 대해 검토하고자 하였다. 실험은 W/B 50% 1수준에 대하여 OPC를 100% 사용한 것을 Plain 배합으로 하고, CC를 OPC에 대하여 25, 50, 75%의 3수준으로 치환하고, 혼화재로 FA를 0, 10, 20, 30, 40%의 5수준으로 치환하여 총 16배치를 계획 하였다. 실험결과로 유동성의 경우는 CC 치환율이 증가할수록 점점 감소하는 경향을 나타냈고, FA의 치환율이 증가할수록 증가하였다. CC 및 FA 치환율 별간이단열에 의한 온도 상승량은 치환율이 증가할수록 감소하였는데, 특히 FA40의 경우 CC치환율에 관계없이 최대 피크온도가 $7.3{\sim}8.9^{\circ}C$로 45%정도 아주 낮게 나타났다. 초기 압축강도는 CC 및 FA치환율 증가에 따라 비례적으로 저하하였는데, 재령경과에 따라 강도저하 폭은 감소하는 것으로 나타났다.

• 한국해양공학회지
• /
• 제25권1호
• /
• pp.73-79
• /
• 2011

The various properties of concrete have been required, as civil engineering structures are getting larger and complicated. Therefore, the high performance of concrete, such as high strength, high fluidity, and low hydration heat, has been investigated largely. In this study, the properties of lightweight concrete-reducing self-weight of structure member have been studied in order to check the applicability of lightweight aggregate concrete to structural material. The experiments on compressive strength, splitting tensile strength, unit weight, and modulus of elasticity have been conducted with varying PLC, LWCI, LWCII, LWCII-SF5, LWCII-SF15 to check the basic properties. The compressive strength of 21MPa was obtained easily by using lightweight aggregate concrete and the addition of silica fume to increase the compressive strength slightly. To use lightweight aggregate concrete for civil engineering structures, systematic and rigorous studies are necessary.