• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2867-2869
• /
• 2005

색역폭 사상은 디스플레이 장치간의 색재현성 차이를 보정하는 하나의 방법이다. 일반적으로 실시간 색역폭 사상은 3차원 Look-Up Table과 3차원 보간기로 구성되고 3차원 보간기의 성능은 3차원 Look-Up Table에 의해 결정된다. 본 논문에서는 실시간 색역 사상에 사용되는 3차원 Look-Up Table을 Least Square Method(최소자승법)를 이용하여 최적화하고자 한다. 시뮬레이션 결과 제안된 방법에 의해 생성된 Look-Up Table이 기존의 방법에 비해 우선된 색 재현 성능을 갖는다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1598-1603
• /
• 2000

In this paper, an efficient pulse shaping filter architecture for SSB/BPSK-DS/CDMA is proposed. The filter satisfies the specifications in IS-95. The proposed architecture is based on polyphase decomposition and look-up table method. By exploiting the linear phase property of the decomposed filter coefficients, the chip area required for look-up table can be reduced by half compared with the conventional methods. By Synopsys simulations, it is shown that the use of the proposed method can result in reduction in the number of gates by 40%.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.104-105
• /
• 2013

When actual IPMSM is driving, it is difficult to figure out the correct current during the current control period due to the operation speed limit of digital signal processing. Therefore, in order to control IPMSM for electric vehicle efficiently, we should design 2D Look-up Table to find out optimal current reference corresponding to speed and torque of IPMSM. This paper explains the design method of 2D Look-up Table for optimal current control of constant torque area and constant output area of IPMSM for electric vehicle. Finally, experimental results are presented to verify the reliability of 2D Look-up Table.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.704-709
• /
• 1993

In this paper, a method of using a look-up table for a fuzzy logic controller is proposed. A look-up table is designed for a fast inference. An algorithm for an inference is developed with a view to decrease execution time. The performance of the developed fuzzy controller is compared with that of the traditional one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3C
• /
• pp.255-261
• /
• 2008

Conventional look-up table(LT) has gained a lot of speed increase in generation of digital holograms for 3D objects, but it has required an enormous memory size of the LT. In this paper, a novel approach to dramatically reduce the size of the conventional LT, still keeping its advantage of fast computational speed is proposed, which is called here a N-LT(novel look-up table) method. In the proposed method, only the fringe patterns of the center points on each image plane are pre-calculated, called elemental fringe patterns and stored in the look-up table. Then, the fringe patterns for other object points on each image plane can be obtained by simply shifting this pre-calculated elemental fringe pattern according to the displaced values from the center to those points and adding them together. Some experimental results revealed that the computational speed and the required memory size of the proposed approach are found to be 48.7 times faster than that of the ray-tracing method and 217 times smaller than that of the conventional LT method, respectively.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.150.2-150
• /
• 2001

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.130-135
• /
• 2009

In this paper, an efficient pulse-shaping filter structure for high-density and low-power electronic devices is proposed. The proposed structure is based on polyphase decomposition property and look-up table method. By Synopsys CAD simulations, it is shown that the use of the proposed method can result in reduction in the number of gates by 54% and can reduce power consumption by 9%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2355-2364
• /
• 2012

Recently, the novel loop-up table(N-LUT) method to solve the tremendous memory problem of the conventional look-up table (LUT) method as well as to increase the generation speed of hologram patterns has been proposed. But, as the resolution of an input 3-D object is enhanced, the number of object points to be calculated for generation of its hologram pattern also increases, which results in a sharp increase of the computation time. Therefore, in this paper, a new approach for fast generation of the hologram pattern of 3-D object images is proposed by using the block redundancy feature of 3-D object images and the N-LUT method. Experimental results show that in the proposed method the number of object points and the overall computation time have been reduced by 43.3 % and 47.9 %, respectively compared to those of the conventional method for the case of the $5{\times}5$ block size. These good experimental results finally confirm the feasibility of the proposed method.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.3
• /
• pp.101-108
• /
• 2016

I propose a hybrid fuzzy controller with a look-up table to improve the performance of the FARMA(Fuzzy Auto-regressive Moving Average) fuzzy controller. The hybrid structure of the proposed method is composed of a fuzzy controller with a look-up table of the PD type and the FARMA fuzzy controller. The proposed method improves poor performance due to the lack of I/O data to calculate predictive output and shows robust performance over the FARMA fuzzy controller when a incorrect Dmax value is selected by trial and error. I executed some computer simulations on the regulation problem of an inverted pendulum system and compared the results with those of the FARMA fuzzy controller.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.5
• /
• pp.411-417
• /
• 2016

Theoretical IPMSM control technique is complicated, and reliability is low because of the changing parameters. Further, in case of general look-up table designing method which obtains torque characteristics (according to current and speed) or torque characteristics (according to magnetic flux through the entire control region), obtaining a precise result can be difficult and has the disadvantage taking too much time to establish a current look-up table. In this paper, the new auto maximum torque point tracking (MTPT) algorithm that automatically finds the optimum stator d - q axis electric current reference through the entire speed region is devised; consequently, it could establish a 3D look-up table with torque characteristics according to current and speed. In case of using the devised auto MTPT algorithm, the result value detailed was obtained in comparison with the generalized look-up design technique, and checked to reduce the current look-up table establishment time.