• 한국안전학회지
• /
• 제23권5호
• /
• pp.84-90
• /
• 2008

The occurrence of longitudinal cracking in concrete deck of box girder bridge is affected by many factors, but the most important factors are the shrinkage and thermal gradient of deck slabs. In this study, therefore, the tensile stresses at the bottom of deck were calculated from the experimental data(autogeneous shrinkage, drying shrinkage, and thermal gradient of deck slab). Also, the possibility of longitudinal cracks at bottom of deck was estimated. For this purpose, full-scale box girder segments have been fabricated and tested. The thermal gradients and shrinkage strains of deck slabs were measured after placement of concrete. Also, analytic program was conducted for the evaluation of longitudinal cracking in bridge deck considering differential shrinkage induced from non-uniform moisture distributions in concrete.

• 대한조선학회논문집
• /
• 제44권5호
• /
• pp.504-508
• /
• 2007

In the case of thin plate blocks, buckling deformation due to longitudinal shrinkage is the most important weld-induced deformation. This paper is concerned with developing the formula to predict the longitudinal shrinkage due to welding, in which mechanical tension effect in welding direction is accounted for. For this purpose, bead on plate welding test has been carried out for the 27 thin plate specimens with varying welding conditions and magnitude of tensile load. Empirical formula of predicting the longitudinal shrinkage has been derived based on the results of welding test, in which effect of mechanical tension is included. The derived formula can be usefully used in predicting the level of tensile load to reduce the longitudinal shrinkage.

• Journal of Welding and Joining
• /
• 제34권6호
• /
• pp.20-27
• /
• 2016

This study deals with the proper conditions of the trail rolling method (TRM) for the prevention of the buckling welding distortion at the AA5083 GMA butt weldment. For it, the effect of the working conditions of TRM including the rolling depth and the rolling distance between the welding torch and the roller on the longitudinal welding shrinkage force of the weldment was evaluated by using 3 dimensional thermo-mechanical FE analyses. The longitudinal welding shrinkage force inducing the buckling welding distortion at the GMA butt weldment was mitigated with an increase in the rolling depth and the rolling distance between the welding torch and the roller. Based on the results, the proper conditions of trail rolling method were established to reduce the longitudinal welding shrinkage force of the GMA butt weldment to below the critical value corresponding to the bucking distortion.

• Computers and Concrete
• /
• 제23권5호
• /
• pp.329-334
• /
• 2019

Traffic flow capacity of some old road bridges is insufficient due to limited deck width. In such cases bridge deck widening is a common solution. For multi-girder reinforced concrete (RC) bridges it is possible to add steel-concrete composite girders as the new outermost girders. The deck widening may be combined with bridge strengthening thanks to thickening of the existing deck slab. Joint action of the existing and the added parts of such bridge span must be ensured. It refers especially to the horizontal plane at the interface of the existing slab and the added concrete layer as well as to the vertical planes at the external surfaces of the initially outermost girders where the added girders are connected to the existing bridge span. Since the distribution of the added concrete is non-uniform in the span cross-section the structure is particularly sensitive to the added concrete shrinkage. The shrinkage induces shear forces in the aforementioned planes. Widening of a 12 m long RC multi-girder bridge span is numerically analysed to assess the influence of the added concrete shrinkage. The analysis results show that: a) in the vertical plane of the connection of the added and the existing deck slab the longitudinal shear due to the shrinkage of the added concrete is comparable with the effect of live load, b) it is necessary to provide appropriate longitudinal reinforcement in the deck slab over the added girders due to tension induced by the shrinkage of the added concrete.

• Restorative Dentistry and Endodontics
• /
• 제34권4호
• /
• pp.364-370
• /
• 2009

본 연구의 목적은 strain gage와 LVDT (linear variable differential transformer) 변위센서를 이용하여 섬유 보강 복합레진에서 섬유의 방향이 복합레진의 중합수축에 미치는 영향을 알아보기 위함이다. 지름 10 mm, 높이 2 mm의 원반 모양 유동성 복합레진 (Aeliteflo A2, Bisco, Inc., IL, USA) 중앙에 유리섬유 (X-80821P Glass Fiber, Bisco, Inc., IL, USA)를 위치시키고, 섬유가 배열된 장축 방향 (longitudinal)과 수직방향 (transversal)의 중합수축량을 strain gage (Linear S-series 350${\Omega}$, CAS, Seoul, Korea)를 이용하여 각각 측정하였다. 사용된 유동성 복합레진 자체의 free 중합수축을 구하기 위해 지름 7 mm, 높이 1 mm의 원반 모양 시편의 수직 방향 (axial) free 중합수축값을 LVDT로 측정하였다. 중합된 시편들을 절단하여 주사전자현미경으로 복합 레진 내부의 섬유배열을 관찰하고 각 군에서 측정된 평균 수축값들을 ANOVA로 비교하였고 Scheffe post-hoc test로 사후 검정하였다 (${\alpha}$=0.05). 섬유가 배열된 평면 상에서 복합레진의 중합수축 (radial shrinkage)은 섬유와 평행한 방향에서 감소하고 섬유와 수직한 방향에서 증가했다 (p<0.05). 본 연구의 결과 섬유 보강 복합레진으로 스플린트나 수복물을 제작할 때 중합수축량은 보강된 섬유의 배열방향에 따라 큰 차이가 남을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권2호통권130호
• /
• pp.17-23
• /
• 2005

Juvenile and transitional-juvenile wood samples from loblolly pine (Pinus taeda) were immersed in water to investigate longitudinal and tangential swelling properties. Increment cores from twenty-six loblolly pine trees were sampled at breast height (1.37 m). Earlywood rings 5 and 9 were separated from the core, extracted, oven-dried and immersed in water at room temperature. The variance in longitudinal swell was significant for ring 5 compared to ring 9 (p = 0.001). It was found that tangential swell might predict longitudinal swelling of juvenile wood at ring 9 but not at ring 5. Poor correlation in ring 5 suggests that swelling response in younger juvenile wood may differ. The swell response at ring 5 did not follow the shrinkage models discussed in the literature while ring 9 adhered to the expected curve.

• Journal of Welding and Joining
• /
• 제28권4호
• /
• pp.41-48
• /
• 2010

The purpose of this study is to establish the control method of the global bending distortion caused by fabrication process of hatch-cover in a container ship. In order to do it, the transitional behavior of global bending distortion in the deck of hatch-cover during fabrication process was measured by 3-dimensional measuring instrument. From the results, the principal factor controlling the global bending distortion was identified as the bending moment associated with the longitudinal shrinkage force and transverse shrinkage caused by welding and flame heating and the change of the centroid axis of hatch-cover in each fabrication process. Therefore, in this study, with the predictive equations of the longitudinal shrinkage force and transverse shrinkage caused by welding and flame heating and the simplified thermo elastic method, the predictive method for the global bending distortion was established and verified by comparing with the measured result. Based on the results, the amount of reverse bending distortion of main stiffeners was determined to prevent the global bending distortion of hatch-cover.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권5호
• /
• pp.19-28
• /
• 2012

본 연구에서는 반횡류식 터널 덕트슬래브 하면 중앙부에 발생한 종방향 균열의 발생 원인을 분석하였다. 분석을 수행하기 위하여 균열이 발생 부위에 대한 상세한 외관조사, 비파괴조사 및 덕트슬래브의 처짐 측량을 실시하였고, 그 결과와 수치해석결과와의 상관관계 분석을 수행하여 균열 발생 원인에 대한 상세한 분석을 실시하였다. 균열 발생 원인의 주요 인자로 단부구속조건, 철근의 위치, 온도의 변화 및 건조수축 등으로 분류하였고, 콘크리트 라이닝을 우선적으로 타설하고 덕트슬래브를 철근 커플러로 강결하여 수개월 후에 별도 타설한 시공여건에 따라 발생할 가능성이 있는 요소들을 고려하여 수치해석을 실시하였다. 특히, 건조수축에 대한 분석을 위하여 ACI209 및 콘크리트 구조설계기준의 예측식과 기존 연구의 실험결과를 비교하여 시공당시의 건조수축 발생량을 예측하였고 구조해석을 수행하여 건조수축이 균열발생의 주요한 원인 중에 하나라는 결과를 도출하였다. 이에 따라 기존에 수행한 도로터널의 안전진단 결과를 덕트슬래브의 시공 방법에 따라 분류하고 균열발생 패턴을 분석하여 덕트슬래브가 있는 터널의 시공방법의 개선에 대한 제언을 하였다.

• Journal of Welding and Joining
• /
• 제26권3호
• /
• pp.23-29
• /
• 2008

The purpose of this study is to propose the proper fillet welding process for preventing the buckling distortion in thin panel welded structure. In order to do it, a heat input model for laser hybrid welding process was developed using FEA and experiment. The principal factors controlling the angular distortion and longitudinal shrinkage force caused by FCA and laser hybrid welding were identified as the welding heat input and weld rigidity using FEA. The predictive equations of angular distortion and longitudinal shrinkage force for each welding process were formulated as a function of the principal factors proposed. With the predictive equations, the buckling distortion at the thin panel welded structure with welding process was evaluated and compared using nonlinear buckling analysis and STEM(simplified thermo elastic method). Based on the results, the best way to prevent the buckling distortion at the given welded panel structures was identified as an intermittent FCA welding.

• Journal of Welding and Joining
• /
• 제25권6호
• /
• pp.59-63
• /
• 2007

The weld-induced deformation is more serious in thin plates than in thick plates because heat affect zone of thin plates is wider than that of thick plates and in addition internal and external constraints have much more influence upon weld-induced deformation of thin plates. This paper deals with the application of the mechanical tensioning method to butt weld of thin plates to reduce the transverse and longitudinal deformation. In order to investigate the quantitative effect of tensioning method upon the reduction of angular deformation and shrinkage in longitudinal and transverse direction of weld line, butt welding test has been carried out for several thin plate specimens with varying plate thickness and magnitude of tensile load. From the present experimental study, it has been found that the tensioning method is very effective in reducing the weld-induced residual stress as well as the weld-induced deformation.