• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1613-1621
• /
• 1997

Many studies on internal data expression to process logic functions efficiently on computer have been doing actively. In this paper, we propose an efficient logic function manipulation system made on the Objected-Oriented manner, where Binary Decision Diagrams(BDD's) are adopted for internal data espressionof logic functions. Thus it is easy to make BDD's presenting combinational problems. Also, we propose a method of applying filtering function for reducing the size of BDD's instead of attributed bits, and add it to the mainpultion system. As a resutls, the space of address is expanded so that the number of node that can be used in the mainpulation system is increased up to 2/sup 27/. Finally, we apply the implemented system to One-Shot state assignment problems of asynchronous sequential circuits and show that it is efficient for the filtering method to reduce the size of BDD's.

• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.41-48
• /
• 2017

In this paper, we proposed a method for digital logic circuit control, through arduino device programming with digital outputs, to design a curriculum for basic digital logic circuit practices. Curricula for arduino device programming and digital logic circuit are essentially practiced in engineering departments of colleges or high schools in South Korea. However, actual practice course lacks the experimental examples of digital logic circuit combined with arduino device programming. Furthermore, actual practice course lacks the curriculum in that students design and test their own digital logic circuits with the less cost than the oscilloscope. Therefore, to solve these problems in this paper, we proposed a curriculum for basic digital logic circuit practices during one semester. In this curriculum, students control and experiment their own digital logic circuits through arduino device programming with digital outputs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.439-446
• /
• 1998

This paper presents design of SD adder and PD adder on Multi-Valued Logic. For implementing of Multi-valued logic circuits we use Current-mode CMOS circuits and also use Voltage-mode CMOS circuits partially. The proposed arithmetic circuits was estimated by SPICE simulation. At the SD(Signed-Digit) number presentation applying Multi-Valued logic the carry propagation is always limited to one position to the left this number presentation allows fast parallel operation. The addition method that add M operands using PD( positive digit number) is effective not only for the realization of the high-speed compact arithmetic circuit, but also for the reduction of the interconnection in the VLSI processor. therefor, if we use PD number representation, the high speed processor can be implementation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.76-82
• /
• 2002

This paper presents a quaternary-binary decoder, a quaternary logic current buffer, and a quaternary logic full-adder using current-mode multiple-valued logic CMOS circuits. Proposed full-adder requires only 15 MOSFET, 60.5% and 48.3% decrease of devices are achieved compared with conventional binary CMOS full-adder and Current's full-adder. Therefore, decrease of area and internal nods are achieved. Designed circuits are simulated and verified by HSPICE. Proposed full-adder has 1.5 ns of propagation delay and 0.42㎽ of power consumption. Also, proposed full-adder can easily adapted to binary system by use of encoder, designed decoder and designed current buffer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.12
• /
• pp.72-79
• /
• 2003

This paper proposes a 32${\times}$32 Modified Booth multiplier using CMOS multiple-valued logic circuits. The multiplier based on the radix-4 algorithm is designed with current mode CMOS quaternary logic circuits. Designed multiplier is reduced the transistor count by 67.1% and 37.3%, compared with that of the voltage mode binary multiplier and the previous multiple-valued logic multiplier, respectively. The multiplier is designed with a 0.35${\mu}{\textrm}{m}$ standard CMOS technology at a 3.3V supply voltage and unit current 10$mutextrm{A}$, and verified by HSPICE. The multiplier has 5.9㎱ of propagation delay time and 16.9mW of power dissipation. The performance is comparable to that of the fastest binary multiplier reported.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.40-47
• /
• 2006

This paper introduces an efficient CRC logic partitioning algorithm to design pipelined parallel CRC circuits aimed at improving speed performance. Focusing on the cases that the input data width is greater than the polynomial degree, equations are derived to divide the parallel CRC logic and decide the length of the pipeline stage. Through design experiments on different types of parallel CRC circuits, we have found a significant reduction in delay by adopting our approach.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1959-1960
• /
• 2008

The Logic Built In Self Test (LBIST) technique is substantially applied in chip design in most many semiconductor company in despite of unavoidable overhead like an increase in dimension and time delay occurred as it used. Currently common LBIST software uses the MISR (Multiple Input Shift Register) However, it has many considerations like defining the X-value (Unknown Value), length and number of Scan Chain, Scan Chain and so on for analysis of result occurred in the process. So, to solve these problems, common LBIST software provides the solution method automated. Nevertheless, these problems haven't been solved automatically by Tri-state Bus in logic circuit yet. This paper studies the algorithm that it also suggest algorithm that reduce additional circuits and time delay as matching of pattern about 2-type circuits which are CUT(circuit Under Test) and additional circuits so that the designer can detect the wrong location in CUT: Circuit Under Test.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.4
• /
• pp.55-61
• /
• 1994

The multiple valued logic(MVL) circuit with ROM type using current mode CMOS is presented in this paper. This circuit is composed of the multiple valued-to-binary(MV/B) decoder and the selection circuit. The MV/B decoder decodes the single input multiple valued signal to N binary signal, and the selection circuits is composed N$\times$N array of the selecion cells with ROM types. The selection cell is realized with the current mirror circuits and the inhibit circuits. The presented circuit is suitable for designing the circuit of MVL functions with independent variables, and reduces the number of selection cells for designing the circuit of symmetric MVL functions as many as {($N^2$-N)/2}+N. This circuit possess features of simplicity. expansibility for array and regularity, modularity for the wire routing. Also, it is suitable for VLSI implementation.

• Journal of IKEEE
• /
• v.9 no.1 s.16
• /
• pp.1-6
• /
• 2005

This paper proposes a high performance multiplier using CMOS multiple-valued logic circuits. The multiplier based on the Modified Baugh-Wooley algorithm is designed with current-mode CMOS quaternary logic circuits. The multiplier is functionally partitioned into the following major sections: partial product generator block(binary-quaternary logic conversion block), current-mode quaternary logic full-adder block, and quaternary-binary logic conversion block. The proposed multiplier has 4.5ns of propagation delay and 6.1mW of power consumption. This multiplier can easily adapted to the binary system by the encoder and the decoder. This circuit is designed with 0.35um standard CMOS process at 3.3V supply voltage and 5uA unit current. The validity and effectiveness are verified through the HSPICE simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.917-925
• /
• 2016

Schmitt Trigger logic is a gate level design method to have hysteresis characteristics to improve noise immunity in digital circuits. Dynamic Threshold voltage MOS(DTMOS) Schmitt trigger circuits can improve noise immunity without adding additional transistors but by controlling substrate bias. The performance of DTMOS Schmitt trigger logic has not been verified yet in standard CMOS process through measurement. In this paper, DTMOS Schmitt trigger logic was implemented and verified using Magna $0.18{\mu}m$ MPW process. DTMOS Schmitt trigger buffer, inverter, NAND, NOR and simple digital logic circuits were made for our verification. Hysteresis characteristics, power consumption, and delay were measured and compared with common CMOS logic gates. EM Immunity enhancement was verified through Direct Power Injection(DPI) noise immunity test method. DTMOS Schmitt trigger logics fabricated using CMOS process showed a significantly improved EM Immunity in 10 M~1 GHz frequency range.