• Journal of the Korea Computer Industry Society
• /
• v.7 no.3
• /
• pp.205-215
• /
• 2006

In this paper, a method how to make Programmable Logic Array (PLA) design and inspection of circuit relative to recent 64bit microprocessor simple and easy was discussed. A design method using Random Access Memory (RAM), Read Only Memory (ROM) and PLA has been settled down in Very Large Scale Integrated Circuit (VLSI) and logical design, modifying circuit and inspection are easy in PLA so it holds fairly good advantages in the aspect of performance and cost. It is expected PLA will also occupy an important position as a basic factor in designing VLSI in the future.

• Journal of Sensor Science and Technology
• /
• v.26 no.3
• /
• pp.209-213
• /
• 2017

The delay-insensitive Null Convention Logic (NCL) asynchronous design as one of innovative asynchronous logic design methodologies has many advantages of inherent robustness, power consumption, and easy design reuses. However, transistor-level structures of conventional NCL gate cells have weakness of high area overhead and high power consumption. This paper proposes a new NCL gate based on power gating structure. The proposed $4{\times}4$ NCL multiplier based on power gating structure is compared to the conventional NCL $4{\times}4$ multiplier and MTNCL(Multi-Threshold NCL) $4{\times}4$ multiplier in terms of speed, power consumption, energy and size using PTM 45 nm technology.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.407-409
• /
• 2006

This paper presents the methods of designing the control circuits for a Class D amplifier to have a peak performance. The proposed approach is based on the three functional components - a carrier generator, a feedback circuit and a dead-time circuit. First the analog signal is applied to the controller, which outputs the 3 level PWM waveform. The controller used for this experiment is made of the operational amplifier and the logic circuit. The experimental results show that the control circuit performs with satisfaction and its output is proportional to input audio signal, providing a satisfactory 3 level PWM pattern. From this design methodology, by implementing a proposed control circuit we can achieve the efficient Class D amplifier using the half-bridge, full-bridge or push-pull topology at the output stage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1C
• /
• pp.8-13
• /
• 2011

In this paper, we show new method to find error locations of 2 eight bit symbol errors for 2 error correcting Reed-Solomon decoder. New design is much faster and has much simpler logic circuit than the former design method. This optimization was possible by partitioning the 8 bit operations into 4 bit arithgmatic and logic operations. This Reed Solomon decoder can be used for data protection of almost all digital communication and consumer electronic devices.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.599-603
• /
• 1988

In this paper, a flash type A/D converter using Variable Threshold Logic circuit is designed and is layonted by double metal CMOS 2 um design rule. Comparator and register string which is the basic elements of a general flash type A/D converter are substituted by simple comparator circuit which is slightly modified from cmos inverter.

• Journal of Information Display
• /
• v.6 no.4
• /
• pp.11-15
• /
• 2005

We propose a current mode logic circuit design method for LTPS TFT for enhancing circuit operating speed. Current mode inverter/buffers with passive resistive load had been designed and fabricated. Measurement results indicated that the smaller logic swing of the current mode allowed significantly faster operation than the static CMOS. In order to reduce the chip size, both all pTFT and all nTFT active load current mode inverter/buffer had been designed and analyzed by HSPICE simulation. Even though the active load current mode circuits were inferior to the passive load circuits, it was superior to static CMOS gates.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1492-1494
• /
• 1987

This paper describes a hardware architecture called Edge Painting Machine for real time generation of scan line images for raster scan graphics display. The Edge Painting Machine consists of Scanline Processor which converts polygon data sorted in their depth priority into a set of scan line commands for each scan line, and Edge Painting Tree which converts the scanline commands set into a raster line image. Edge painting tree has been designed using combinational logic circuit. The designed circuit has been simulated to verify the proper functioning. A salient feature of the EPT is that hardware composition is simple, because each processor is constituted by only combinational logic circuit.

• The KIPS Transactions:PartA
• /
• v.14A no.2
• /
• pp.107-116
• /
• 2007

In this paper, we present a method on the construction of multiple-valued circuits using Reed-Muller Expansions(RME). First, we discussed the input output interconnection of multiple valued function using Perfect Shuffle techniques and Kronecker product and designed the basic cells of performing the transform matrix and the reverse transform matrix of multiple valued RME using addition circuit and multiplication circuit of GF(4). Using these basic cells and the input-output interconnection technique based on Perfect Shuffle and Kronecker product, we implemented the multiple valued logic circuit based on RME. The proposed design method of multiple valued RME is simple and very efficient to reduce addition circuits and multiplication circuits as compared with other methods for same function because of using matrix transform based on modular structures. The proposed design method of multiple valued logic circuits is simple and regular for wire routing and possess the properties of concurrency and modularity of array.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.411-421
• /
• 1988

This paper offers a method to design CCD four-valued circuits using the tabular method. First, the four-valued logic function is decomposed by hand-calculation or computer program. Nest, the algorithm is derived form the tabular method based on the decomposition process to realize the DDC four-valued circuit. According to this algorithm, the two-variable four valued logic function is decomposed and realized by CCD network with four basic gates. The synthesis method in this paper proves that the number of devices and cost is considerably reduces as compared with the existing methods to realize the same logic functions.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.4
• /
• pp.109-120
• /
• 1983

This paper presents standard program which can be used in the software realizations of sequential logic circuits. Thy are simple, flexible, and independent of applications and operate in the same way that man decides next states and outputs using the state transition table. With proposed programs, designers who aren't familiar with microprocessors and programming techniques will be able to design sequential logic circuits easily. Examples are illustrated, in order to prove their flexibility and adaptability, using Z-80 microprocessor.