• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권3호
• /
• pp.193-196
• /
• 2001

For wide locking range, an analog delay locked loop (DLL) was designed with the selective phase inversion scheme and the variable number of delay elements. The number of delay elements was determined adaptively depending on the clock cycle time. During the analog fine locking stage, a self-initializing 3-state phase detector was used to avoid the initial state problem associated with the conventional 3-state phase detector. With these schemes, the locking range of analog DLL was increased by four times compared to the conventional scheme according to the simulation results.

• 한국공작기계학회논문집
• /
• 제15권6호
• /
• pp.121-126
• /
• 2006

Snap-fit is being used in manufacture of plastic products. Integral features using snap-fit are classified as locks, locators and enhancements. Locking features complete the process of attachment by providing physical interference to prevent separation. Looking feature pairs consist of two components, i.e., a flexible latch and a rigid catch and require particular care and attention for their selection. We can make several locking feature pairs by selecting latch and catch, but some parts restrict freedom of selection. Therefore, part designers must know the characteristic properties of generic locking feature forms as considering a specific design problem. In this paper, it has been presented about problem of small size products using locking feature and then introduced new locking feature applicable to small parts.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권4호
• /
• pp.1899-1911
• /
• 2018

In this work, we propose a concurrency control scheme in object-oriented database (OODB). Since an OODB provides complex modeling power than the conventional relational databases, a concurrency control technique in OODB is also rather complicated and has influence on the overall performance. Thus, it is very important to develop a concurrency control technique with less overhead. The proposed scheme deals with class hierarchy that is a key concept in OODBs. The proposed scheme is developed on implicit locking scheme. Also, the proposed scheme is designed using data access frequency in order to reduce locking overhead than implicit locking. It means that, if access frequency information is not available, the proposed scheme works just like the existing implicit locking, In our work, the correctness of the proposed scheme is proved. The performance is analyzed depending on access types. Also, it is proved that our scheme performs works much better than the implicit locking does.

• 한국가구학회지
• /
• 제20권2호
• /
• pp.122-135
• /
• 2009

The objective of this work was to research click profile of laminate flooring by comparison of click and bonding laminate floorings, especially base on the click profile shape, bonding strength and international patents. Non-glue locking system has been used since laminate flooring was developed. For the reason of environment and saving installation time, the manufacturer in Europe and USA has developed click profile for laminate flooring. Each manufacturer has patent on each click profile. Although each click profile has good lock strength as shape, Berryand Unilin company's click profile systems showed higher locking strength than others. Korean laminate flooring company pay the fee of patent for using European and American manufacturer's click profile. From this work, we grope Korean style laminate flooring and click profile through research on the click profile shape, bonding strength and patents of European and American manufacturers.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1614-1617
• /
• 2003

Actuator being used in the ship supplies engine with air. When actuator is out of order, engine is not operated. This out of order is due to fracture of piston or rotating of spindle in the case of plastic deformation of parallel part in locking plate. For this reason, locking plate must be guaranteed enough strength. Therefor in this paper, the effects of changes with the clearance of between spindle and parallel part, the contact height of parallel part and spindle, the side circle diameter of parallel part and the width of locking plate in the designated torque are investigated. The result of this investigation shows the relation between locking plate and spindle.

• Journal of information and communication convergence engineering
• /
• 제3권1호
• /
• pp.18-22
• /
• 2005

This paper presents the analog adaptive phase-locked loop (PLL) architecture with a new adaptive bandwidth controller to reduce locking time and minimize jitter in PLL output for wireless communication. It adaptively controls the loop bandwidth according to the locking status. When the phase error is large, the PLL increases the loop bandwidth and reduces locking time. When the phase error is small, the PLL decreases the loop bandwidth and minimizes output jitters. The adaptive bandwidth control is implemented by controlling charge pump current depending on the locking status. A 1.28-GHz CMOS phase-locked loop with adaptive bandwidth control is designed with 0.35 $mu$m CMOS technology. It is simulated by HSPICE and achieves the primary reference sidebands at the output of the VCO are approximately -80dBc.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.13-19
• /
• 1989

Passive mode-locking of a pulsed Nd:YAG laser is achieved with saturable absorbers, BDN dye in iodoethane solvent and Kodak Eastman # 26 dye in 1,2-dichloroethane solvent, and its optimum conditions are investigated. The thickness of saturable absorbers employed in the laser mode-locking is 0.16~0.50mm. The PBR (peak-to-background ratio) measured in the oscilloscope is 79.8% in Kodak Eastman # 26 dye at the neighbourhood of the peak power, whereas the passive mode-locking with BDN dye gives PBR of 67.7%. BDN and Kodak Eastman # 26 dyes are superior in photostability over Kodak eastman # 9860 and # 9740 dyes which were used previously in passive mode-locking. From the PBR curve, we find that Kodak Eastman # 26dye is more effective than BDN dye in passive mode-locking. The spacing between the adjacent pulses of the pulse train, which depends on the laser cavity length, is measured and is found to be 7 nsec for the cavity length of 100cm.

• Clinics in Shoulder and Elbow
• /
• 제17권4호
• /
• pp.159-165
• /
• 2014

Background: Kirschner's wire (K-wire) transfixation and locking hook plate fixation techniques are widely used in the treatment of acute acromioclavicular joint (ACJ) dislocation. The purpose of this study was to compare the clinical and radiologic outcomes between K-wires transfixation and a locking hook plate fixation technique. Methods: Seventy-seven patients with acute ACJ dislocation managed with K-wire (56 shoulders) and locking hook plate (21 shoulders) were enrolled for this study. The mean follow-up period was 61 months. Results: At the last follow-up, the shoulder rating scale of the University of California at Los Angeles (UCLA) was higher in patients treated with locking hook plate than with K-wires ($33.2{\pm}2.7$ vs. $31.3{\pm}3.4$, p=0.009). In radiologic assessments, coracoclavicular distance (CCD) (7.9 mm vs. 7.7 mm, p=0.269) and acromioclavicular distance (ACD) (3.0 mm vs. 1.9 mm, p=0.082) were not statistically different from contralateral unaffected shoulder in locking hook plate fixation group, but acromioclavicular interval (ACI) was significant difference. However, there were significant differences in ACI, CCD, and ACD in K-wire fixation group (p<0.001). Eleven complications (20%) occurred in K-wire transfixation group and 2 subacromial erosions on computed tomography scan occurred in locking hook plate fixation group. Conclusions: ACJ stabilization was achieved in acute ACJ dislocations treated with K-wires or locking hook plates. Locking hook plate can provide higher UCLA shoulder score than K-wire and maintain CCD, and ACD without ligament reconstruction. K-wire transfixation technique resulted in a higher complication rate than locking hook plate.

• 인터넷정보학회논문지
• /
• 제15권1호
• /
• pp.63-71
• /
• 2014

인공지능과 웹 데이터베이스와 같은 분야에서는 기존의 관계 데이터 모형보다 더 고급 모델링 기능을 필요로 한다. 이러한 분야에서 객체지향데이터베이스는 객체를 모아 클래스를 제공하고 또한 클래스 사이에서 상위클래스는 하위 클래스에게 물려주는 계층구조를 제공하기 때문에 더 좋은 데이터 모형이 될 수 있다. 본 논문의 목적은 객체지향데이터베이스에서 다중 계승을 위한 동시성 제어 기법을 개발하는 것이다. 본 논문에서 제안하는 MIIL(Multiple Inheritance Implicit Locking) 기법은 기존의 Implicit 로킹(Locking) 기법에 기반을 두었다. MIIL 기법은 기존의Implicit 로킹에서 불필요한 로킹을 제거하였다. 또한 본 논문에서 제안하는 MIIL 기법에서의 Intention 로킹은 기존의 Implicit 로킹기법과 동일하게 작동한다. 본 논문에서 제안한 MIIL 기법은 기존의 Implicit 로킹 기법보다 로킹 오버헤드가 적음을 증명하였다. 또한, 본 논문에서는 단일 계승과 다중 계승 등 계승구조만을 이용함으로써 로킹 오버헤드를 줄이기 위한 추가적인 비용을 필요로 하지 않는다.

• Structural Engineering and Mechanics
• /
• 제2권1호
• /
• pp.17-34
• /
• 1994

This paper proposes a new four node degenerated shell element. In the formulation of the new element, the assumed covariant shear strains are used to avoid the shear locking problem, and the assumed covariant membrane strains are applied to alleviate the membrane locking problem and also to improve the membrane bending performance. The assumed covariant strains are obtained from the covariant strain field defined with respect to the element natural coordinate system. This formulation enables us to obtain a shell element, which does not produce spurious singular modes, avoids locking phenomena, and excels in calculation efficiency. Several examples in this paper indicate that, despite its simplicity, the achieved accuracy and convergence are satisfactory.