• 대한후두음성언어의학회지
• /
• 제27권2호
• /
• pp.102-107
• /
• 2016

Background and Objectives : Vocal polyps are caused by inflammation induced by stress or irritation. Many patients with vocal polyps complain voice discomfort. For vocal polyps, surgery such as laryngeal microsurgery has been the mainstay of management. We analyzed the clinical features of vocal polyps, and how the size and location of vocal polyps affect the outcomes of surgery. Methods : We retrospectively reviewed 42 patients from March 2014 to December 2015, who were diagnosed as unilateral single vocal polyp. When we operated on a vocal polyp with laryngeal microscopy, we measured their size and location. The quality of voice was evaluated by GRABS scale, jitter, shimmer, NHR (noise to harmonic ratio), MPT (maximum phonation time), and VHI (voice handicap index) before operation and 4 weeks after operation. Results : When we divided the patients into large-sized vocal polyp group (the longest length >3 mm) and small-sized vocal polyp group (the longest length ${\leq}3mm$), all parameter differences tend to be greater at large sized vocal polyp. However, these differences were not statistically significant (p>0.05). When we divided into two groups depending on the volume of vocal polyp, no distinct tendency was found. When we compared the location (anterior, mid and posterior) of vocal polyp with the improvement of voice quality, more change was found at mid portion vocal polyp, except the difference of VHI. However, these differences were also not statistically significant (p>0.05). Conclusion : All parameter differences tend to be greater at large vocal polyp and polyp of the mid location.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.58.2-58.2
• /
• 2010

This paper deals with the simulation of solid particle coating technology via supersonic nozzle in vacuum environment to devote as an aerosol-deposition device. In order to improve efficiencies of nozzle and coating process, effects of shockwave, nozzle geometry, and substrate location were studied computationally under a fixed chamber pressure of 0.01316 bar which is nearly vacuous. Shockwave is the important factor affect to entire flow because shockwave in the jet flow dissipates the kinetic energy of the flow in the supersonic condition. Results show that various nozzle geometries have significant effect on the supersonic flow and we know that the supersonic nozzle should be optimized to minimize the loss of the flow. Another parameter, the distance between substrate and nozzle tip, shows little effect in this study.

• 대한수학회지
• /
• 제35권3호
• /
• pp.755-764
• /
• 1998

The least informative distributions minimizing Fisher information for location are obtained in the classes of continuously differentiable and piece-wise continuously differentiable densities with the additional restrictions on their values at the median and mode of population in the point and interval forms. The structure of these optimal solutions depends both on the assumptions of smoothness and form of characterizing restrictions of the class of distributions: in the class of continuously differentiable densities, the least informative distributions are finite and have the cosine-type form, and, in the class of piece-wise continuously differentiable densities, the least informative densities have exponential-type tails, the Laplace density in particular. The dependence of optimal solutions on the assumptions of symmetry is also analyzed.

• 한국전산유체공학회지
• /
• 제17권2호
• /
• pp.71-77
• /
• 2012

Numerical simulations are carried out for flow over a circular cylinder controlled by the momentum forcing which is generated by a pair of plasma actuators symmetrically mounted on the cylinder surface. A popular and empirical plasma model is used for the spatial distribution of momentum forcing. In this study, we consider two different types of actuation, i.e., steady and unsteady (or pulsed) actuation. In the unsteady actuation, the actuation is turned on and off periodically, its frequency being a control parameter. The objective of this study is to investigate the effects of actuator location and actuation frequency on the flow structures and the forces on the cylinder. Results show that the cylinder wake can be effectively controlled by proper actuator location. For example, when the actuators are located at $120^{\circ}$ from the stagnation point, vortex shedding is completely suppressed with the boundary layer almost fully attached to the surface, resulting in drag reduction and lift elimination.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.95-99
• /
• 2004

In this study, the leak detection technique of pressure vessel by using acoustic emission(AE) signal is suggested experimentally. The leak of pressure vessel is located at the welding line due to welding defects. we measured the AE signal using Rl5I sensor, and examined the AE parameters in leak condition. It is investigated that the mean value of AE signal is dependent on leak source location. So the absolute mean value of AE signal is adopted as dominant AE parameter. We proposed leak detection algorithm using AE signal mean value for monitoring the leak source location.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.1-6
• /
• 2003

The torque is an important measure that represents the performance of a particular engine. Furthermore the information of engine torque can be used as a primary feedback parameter in modem engine management system. In this paper, a methodology is proposed for torque estimation of SI-engine. Since the proposed method uses cylinder pressure sensor, the torque can be estimated in a simple manner. The indicated torque is estimated from the peak pressure and its location, and the load torque is observed by the state observer based on the estimated indicated torque. The proposed method is accurate and robust against the variations that affect the torque production such as spark timing, mass air flow and others. This torque estimation method may be an alternative solution to the use of engine torque maps in a modem torque-based engine management system.

• Communications for Statistical Applications and Methods
• /
• 제6권1호
• /
• pp.275-283
• /
• 1999

In order to estimate a parameter $(\alpha,\beta^r), r\epsilonN$, in a distribution belonging to a location-scale family we usually use best invariant estimator (BIE) and best unbiased estimator (BUE). But in some conditions Ryu (1996) showed that BIE is better than BUE. In this paper we calculate risks of BIE and BUE in a normal and an exponential distribution respectively and calculate a percentage risk improvement exponential distribution respectively and calculate a percentage risk improvement (PRI). We find the sample size n which make no significant differences between BIE and BUE in a normal distribution. And we show that BIE is always significantly better than BUE in an exponential distribution. Also simulation in a normal distribution is given to convince us of our result.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.461-466
• /
• 1994

This paper is concerned with the positioning control of a flexible arm system using H$_{\infty}$ control theory with optimum sensor location. Firstly, by virtue of the orthogonality of the flexible modes of the flexible arm a reduced order model of the tributed parameter system(DPS) representing the arm has formulated. The dynamical coupling between the flexible arm and DC motor has been considered to formulate an motor composite model. In order to achieve precise positioning with vibration attenuation, sensors have been optimally located. Finally, a robust H$_{\infty}$ controller was designed and the performance of the positioning system has been analyzed.d.

• 전자통신동향분석
• /
• 제13권2호통권50호
• /
• pp.10-28
• /
• 1998

무선 ATM에서는 위치관리 기법으로는 PNNI 라우팅 프로토콜의 확장과 기존의 셀룰러 전화망의 위치 등록기 개념에 근거한 방식들이 제안되고 있는데 크게 Mobile PNNI 방식과 Location Register(LR) 방식으로 나누어진다. Mobile PNNI 방식은 기존의 PNNI 라우팅 프로토콜을 기반으로 하여 단말기의 이동성을 제공할 수 있도록 수정 확장한 위치 관리 기법이다. Mobile PNNI 방식에서는 단말기가 이동할 경우에 영역 변수(scope parameter) S에 의해 제한된 범위 내에서 교환국 간에 reachability information이 갱신되며, 이러한 정보를 이용하는 PNNI 라우팅 프로토콜을 기반으로 하여 위치 추적과 호 설정이 동시에 수행된다. LR 방식은 Mobile PNNI 방식과는 달리 발신호가 발생하게 되면, 계층적인 구조의 위치 등록기들의 추적을 통해 상대편 이동 단말기가 접속된 교환국의 위치 정보를 알아낸 다음, 호 설정 과정을 수행하게 된다. 본 연구에서는 무선 ATM에서의 여러 가지 위치관리 요구사항을 살펴보고, 위에서 언급한 두 가지 방식에 대하여 자세히 소개하고, 이들을 비교 분석한다.

• Journal of the Korean Wood Science and Technology
• /
• 제37권2호
• /
• pp.128-136
• /
• 2009

Curved glued laminated timber (glulam) is rapidly coming into the domestic modern timber frame buildings and predominant in building construction. The radial stress is frequently occurred in curved beams and is a critical design parameter in curved glulam. Three models, Wilson equation, Exact solution and Approximation equation were introduced to determine the radial stress of curved glulam under pure bending condition. It is obvious that radial stress distribution between small radius and large radius was different due to slight change of neutral plane location to center line. If the beam design with extremely small radius, it should be considered to determine the exact location of maximum radial stress. The current standard KSF 3021 was reviewed and would be considered some adjustment determining the optimum radius in curved glulam. Current design principle is that the stress factor is given by the curvature term only in constant depth of the beam, but like tapered or small radius of beams, the stress factor by Wilson equation was underestimated. So current design formula should be considered to improvement for characterizing the radial stress factor under pure bending condition.