• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.159-165
• /
• 2006

Many rubber products are used in industrial products such as various hoses, rubber belts and oil seals etc. Especially, more then 200 rubber parts are used in the automobile, but design technology of these is largely dependent on Held experiences. These methods brought about too much time and cost in the developing procedures. However, with the help of recent rapid development of non-liner computer analysis, we can develop new sound products at low cost. Therefore in this study, optimizations of design variables such as location and number of gate in order to develop CLIP rubber product made of EPDM were performed by CAE in which Cross-WLF equations are adopted. The validity of proposed variables is evaluated by comparison with real forming results.

• 한국군사과학기술학회지
• /
• 제12권6호
• /
• pp.727-732
• /
• 2009

In this paper, the dependence of the Kalman filter-based emitter location algorithm on the initial estimate is investigated. Given all the LOB data, the initial estimate of the emitter location is obtained from the linear LSE algorithm with the former LOB data. Using the initial estimate, the Kalman filter algorithm is applied with the remaining LOB data to update the initial estimate. It is shown that as the number of data used in the calculation of the initial estimate increases, the accuracy of the final estimate is improved and the total computational complexity of obtaining the initial estimate and the final estimate increases. In addition, the dependence of the performance of the Kalman filter algorithm on the predefined constant is illustrated.

• 산업공학
• /
• 제17권4호
• /
• pp.450-458
• /
• 2004

S-Distribution Center supplies parts to three plants of K-automobile manufacturing company. Since the three plants employ the JIT production system, it is important for S-Distribution Center to deliver small quantities of parts frequently and quickly on time. This paper presents a case study on the improvement of order-picking operation in S-Distribution Center. The study is focused on the reductions of move time and waiting time by redesigning the parts storage location, picking-order terminal location, retrieval policy, and equipment operation policy. The proposed operation system for S-Distribution Center is evaluated through a simple computation analysis and computer simulation. Furthermore, the reducible numbers of equipment and order pickers are investigated by performing a sensitivity analysis.

• 환경영향평가
• /
• 제16권4호
• /
• pp.285-300
• /
• 2007

The purpose of this study was to ascertain the ecological state and problems of eco-bridges on Korean roads. The study was conducted from March to April 2007 by checking ecological factors and wildlife around the eco-bridges and habitats. 8 representative eco-bridges were selected by their bridge shape and condition of location. After field survey, we analyzed ideal trails for wildlife using field data, digital topology maps, satellite images, and land use map. In addition to trail analysis, we identified the propriety of the eco-bridges through Population Viability Analysis. Because of unsuitable location and management, we found that most of the bridges are not proper for wildlife dispersal. Moreover, in some habitats, we could expect that some local populations might be extinct without appropriate treatments.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제8권1호
• /
• pp.7-12
• /
• 2002

The air ventilation system of operation rooms has been studied to prevent the cross infection during the operation. Operation rooms and air ventilation systems of three University hospitals were investigated. The distribution of microbe was measured by cultivating air samples in the operation room. A two-dimensional model for the cross-section of an operation room was developed for the CFD(Computational Fluid Dynamics) analysis. The characteristics of air flow in the empty operation room and in occupied operation room were calculated by using a CFD program. The current diffuser location of an old hospital did not deliver the clean air to the operation part efficiently. A new method to locate diffusers that improve air venting with little increase of the cost of equipment was suggested.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.101-108
• /
• 2004

In this study, open conical shells with ring and stringers are analyzed A versatile 4-node shell element which is useful for the analysis of conical shell structures is used and 3-D beam element is used for stiffeners. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. The proposed element has six degrees of freedom per node and permits an easy connection to other types(beam element) of finite elements. Optimum location and optimum section properties of ring and stinger are obtained. It is shown thai the thickness of conical shell can be reduced about $20\~50\%$ by appropriate location of stiffeners.

• Structural Engineering and Mechanics
• /
• 제51권1호
• /
• pp.111-130
• /
• 2014

The aim of this study is to investigate the effects of the beam aspect ratio(L/h), hole diameter, hole location and stacking layer sequence ($[0/45/-45/90]_s$, $[45/0/-45/90]_s$ and $[90/45/-45/0]_s$) on natural frequencies of glass/epoxy perforated beams under room and high (40, 60, 80, and $100^{\circ}C$) temperatures for the common clamped-free boundary conditions (cantilever beam). The first three out of plane bending free vibration of symmetric laminated beams is studied by Timoshenko's first order shear deformation theory. For the numerical analyses, ANSYS 13.0 software package is utilized. The results show that the hole diameter, stacking layer sequence and hole location have important effect especially on the second and third mode natural frequency values for the short beams and the high temperatures affects the natural frequency values significantly. The results are presented in tabular and graphical form.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1471-1473
• /
• 2004

A portable train approaching warning device can be used in order to reduce accidents of the workers on the rail, who are working without recognizing the approaching train, and to secure the safety of the workers. It can be installed in the train so that workers can recognize the approaching train. However, it is not easy to identify the location of the train precisely. In this study GPS and RF devices, which are used to calculate the location of the train were reviewed, to see how much error tolerance they have in the field, to analyze the distance for normal transmission between the receiver and transmitter, to verify the conformity of the portable train approaching warning device developed as a prototype model to the current rail system, and to provide the related fields with the analysis results to improve the existing or application technology. Additionally, test methods to locate the train were introduced and each test result was compared and analyzed.

• 가정과삶의질연구
• /
• 제21권6호
• /
• pp.97-106
• /
• 2003

This study explored the relationship between housing values and condominium purchasing behavior. The participants of this study were married women who had bought a condominium at least once and who also were dwelling in one. Survey questionnaires were conducted on 1103 married women from three residential areas in Daegu. The analytical methods used in this study were frequency, mean, standard deviation, factor analysis, 1-test, one-way ANOVA, post-hoc estimation (Scheff test), and correlation analysis. The results show that the more the women were oriented toward convenience, education, and investment, the more likely they were to make a rational purchase. Also, the more the women's values were oriented toward conspicuous consumption and investment, the more they were likely to make an investment and ostentatious purchase. The women who valued ostentation and location tended to rely on other people's opinions and advertisement more, and were more likely to be impulsive shoppers. Women who valued convenience, education, and location, made their purchase decisions based on the housing prices.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.256-261
• /
• 2008

A CFD analysis of helicopter flowfield in forward flight is considered as non-trivial issue because of the complexity of vorticity-dominated flowfield. In this work, a study on the selection of the proper location for the installation of the Pitot probe is conducted using a CFD code which can deal with the interaction of rotor blade vortex and body. To describe the flow patterns for rotating rotor blades and body, the sliding mesh scheme is utilized. Pressure distributions and flow patterns are also analyzed to identify regions free from the interaction of body and wake induced from rotor blades.