• 한국대기환경학회지
• /
• 제31권6호
• /
• pp.585-592
• /
• 2015

In this study, by applying mobile based GIS and image analysis of particulate matter ($PM_{10}$) concentration in Seoul and Ulsan in Korea, to identify the user's location and also implemented the application to information exchange. It strengthened citizens' access to air quality information through the application and derived the expanded environment information sharing through real-time user participation. Through atmospheric concentrations image analysis, it showed a new environmental information construction possibility. It had the effect of expanding the information collecting through the local user participation on the limited information collected area which place is not yet constructed atmospheric monitoring network. Location-based particulate matter information service application provides a user location's $PM_{10}$ information from the 25 urban air monitoring network real-time database of the Ministry of Environment. Furthermore, if the user sent a picture of the atmosphere to the server, should match the image density values of the database and express on Seoul's maps through the IDW interpolation. And then a $PM_{10}$ concentration result is transmitted to user in real time.

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.557-564
• /
• 2002

Corrugated board is an efficient low-cost structure material fur the boxes that are widely used for transporting, storing and distributing goods. Corrugated board is also considered as an orthotropic because the principal material directions are the same as in paperboard. The purpose of this study was to elucidate the principal design parameters of ventilating box through the FEA on the various types of ventilating hole. From the viewpoint of the stress distribution and stress level, the optimum pattern and location of the ventilating hole were vertically oblong, and symmetry position with a short distance to the right and left from the center of front and rear panel. And, the optimum location and pattern of hand hole were a short distance to the top from the center of both side panels, and modified shape to increase the radius of curvature of both side in horizontal oblong. In general, the optimum pattern and location of both the ventilating hole and hand hole based on the FEM analysis were well verified by experimental investigation. It is suggested that decrease in compressive strength of the box could be minimized in the same ventilating hole area under the condition of the length of major axis of ventilating hole is less than 1/4 of box length, the ratio of minor axis/major axis is 113.5∼l/2.5, and number of the ventilating holes is even and symmetrical.

• Steel and Composite Structures
• /
• 제12권3호
• /
• pp.183-205
• /
• 2012

This paper presents an investigation of the effect of inclined stiffeners on the load-carrying capacity of simply-supported hot-rolled steel I-beams under various load conditions. The study is carried out using finite element analysis. A series of beams modeled using 3-D solid finite elements with consideration of initial geometric imperfections, residual stresses, and material nonlinearity are analyzed with and without inclined stiffeners to show how the application of inclined stiffeners can offer a noticeable increase in their lateral-torsional buckling (LTB) capacity. The analysis results have shown that the amount of increase in LTB capacity is primarily dependent on the location of the inclined stiffeners and the lateral unsupported length of the beam. The width, thickness and inclination angle of the stiffeners do not have as much an effect on the beam's lateral-torsional buckling capacity when compared to the stiffeners' location and beam length. Once the optimal location for the stiffeners is determined, parametric studies are performed for different beam lengths and load cases and a design equation is developed for the design of such stiffeners. A design example is given to demonstrate how the proposed equation can be used for the design of inclined stiffeners not only to enhance the beam's bearing capacity but its lateral-torsional buckling strength.

• 농촌계획
• /
• 제26권2호
• /
• pp.83-93
• /
• 2020

Rural areas have been faced with various problems such as aging and population decline, and in these circumstances, the activation of local communities is suggested as a solution. Agricultural producer organizations are a powerful means of maintaining rural society. The purpose of this study is to understand the characteristics of agricultural community activities by region by comparing the status of organization and activities and analyzing Location Quotient(LQ) based on the regional survey data in the 2015 census of agriculture, forestry, and fisheries. As the results of the analysis, it was found that 38.35% of villages participated in economic organizations and 32.22% of villages were having urban-rural exchange activities. The crop clubs were actively operated in the Gyeongsangbuk province, and other economic organizations were organized in Jeju, Haenam-gun, and Dangjin-si more than other regions. And the urban-rural exchange activities were found in Chungcheongnam province mainly. The results of detailed LQ analysis by organization and activity showed that specialized regions for each community or activity were different. These results could be used for regional planning or the establishment of strategies for community activation.

• 설비공학논문집
• /
• 제19권5호
• /
• pp.386-393
• /
• 2007

This paper studies the ventilation characteristics according to the jet fan location at the long road tunnel using the CFD software 'FLUENT' which is based on the finite volume method. The tunnel model used in the analysis has a length of 1600m, a cross sectional area of $120m^3$, and is composed of 3 lanes and one way. The velocity profile, the distribution of CO concentration and the ventilation flow rate within the tunnel are analyzed, respectively. In the analysis, it is found that the dependence of the ventilation flow rate upon the jet fan location is small, but the CO concentration in the tunnel is at the lowest when the jet fans are installed near the tunnel outlet. An air stream right below the jet fan is almost inactive due to the strong stream injection near the jet fan. Thus, the pollution level below the jet fan must be higher than the other area.

• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.84-92
• /
• 2020

In order to analyze the organizational performance of government-funded research institutes, four independent variables (organization size, organization age, evaluation system, organization location) and goal ambiguity were empirically analyzed. Although there are existing studies on institutional evaluation, which is the organizational performance of government-funded research institutes, there are differences in research in that it is an empirical analysis analyzed from the perspective of goal ambiguity and that the evaluation system, which is the specificity of institutional evaluation, is included in the analysis. As a result of the analysis, organizational location was the only independent variable that had a direct significant effect on organizational performance, and goal ambiguity showed a significant mediating effect for all independent variables. This indicates that goal ambiguity plays an important role in the organizational performance of government-funded research institutes, and to reduce this, increase the size of the organization, pay attention to establishment of the organization for organizational age, and that it is desirable to have an independent research group in the government department for the organization location. In addition, it was supported that the improvement effect of the evaluation system is proceeding in a desirable direction in terms of goal ambiguity.

• 한국컴퓨터정보학회논문지
• /
• 제27권1호
• /
• pp.77-82
• /
• 2022

본 연구는 장소 이미지를 수집하고 학습하여 사용자가 관심이 있어 하는 이미지의 장소를 예측하여 알려주는 서비스 개발을 목적으로 한다. 이미지 학습을 위한 이미지 데이터들은 크롤링 부분을 통해 수집되도록 설계되었다. 이미지 수집 이후 수집된 이미지들은 장소별로 라벨링 되어 CNN의 다양한 층을 통하여 학습된다. 각 층을 거칠 때마다 입력받은 학습 데이터는 최적화하여 특징 맵과의 비교를 반복하며 특정 장소 이미지의 특징 정보를 뽑아낸다. 충분한 학습 데이터가 쌓이면 다양한 장소 이미지들에 대해 예측이 가능하다. 학습 결과 모델의 정확도는 79.2로 높은 학습 정확도를 보였다.

• 한국해양공학회지
• /
• 제37권4호
• /
• pp.158-163
• /
• 2023

Objects adrift can cause considerable damage to coastal infrastructure and property during tsunami and storm surge events. Despite the potential for harm, the drifting behavior of these objects remains poorly understood, thereby hindering effective prediction and mitigation of collision damage. To address this gap, this study employed a motion analysis program to track a drifting container's location using images from an existing laboratory experiment. The container's trajectory and velocity were calculated based on the positions of five markers strategically placed at its four corners and center. Our findings indicate that the container's maximum drift velocity and distance are directly influenced by the scale of the solitary wave and inversely related to the container's weight. Specifically, heavier containers are less likely to be displaced by solitary waves, while larger waves can damage coastal structures more. This study offers new insights into container drift behavior induced by solitary waves, with implications for enhancing coastal infrastructure design and devising mitigation strategies to minimize the risk of collision damage.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.151-151
• /
• 2021

The alarming climate change impacts are demanding the use of renewable energy sources like never before. Hydropower is one of the most cost-effective and environmental friendly energy technology recognized in the world. Big hydropower projects come up with the requirements of huge investment costs along with environmental impacts, whereas small hydropower(SHP) are considered a best solution for the economical source of energy. SHP, basically Run-of-River (RoR) type plants can be sustainable renewable energy sources and given the nature of perennial rivers flowing from steep gradient and rugged topography, feasibility of such plants is equally high in Nepal. The objective of this study is to determine the primary potential sites for the development of RoR type SHP sites using Geo-spatial Information System(GSIS). The use of GSIS enables precise survey of large area within a short period of time. This study has focused on the determination of locations by establishing defined criterions and methodologies and hence have located multiple locations rather than selecting one best location. The approach is applicable for the rapid initial screening of potential locations and results can facilitate detail feasibility study for the technical and economic analysis of SHP in the basin.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.147-148
• /
• 2022

Due to recent climate abnormalities, the form of rainfall is changing to localized torrential rains. Localized torrential rains cause flooding in urban areas. In addition, in various industrial fields, there are cases where materials necessary for the process are kept outdoors, and damage from material loss and flooding of stockyards occurs during heavy rain. Accordingly, it is necessary to introduce a drainage layer where flooding is expected. This drainage layer places the aggregate inside and allows rainwater to penetrate and drain into the voids between the aggregates. However, the amount of voids differs according to the particle size distribution and particle size of the aggregate, and the drainage performance varies according to the compositional location of the aggregate. Therefore, in this study, the drainage characteristics according to the particle size, particle size, and compositional location of aggregates are analyzed using a fluid analysis program.