• Journal of The Geomorphological Association of Korea
• /
• v.17 no.3
• /
• pp.59-75
• /
• 2010

In this study, location evaluation of the natural environment of ports in the Joseon Dynasty was carried out to investigate the outport of east coast for the conquest of Usanguk. As a result of study, there were 55 ports and naval stations in the Joseon Dynasty, including the Yeongokpo, Aninpo, Samcheokpo, Susanpo, and Wolsongpo. As a result of the restoration work in the sea level that was done in the sixth century, the sea level at that time was about 1m higher than that at present. In terms of the location type, three types were identified via natural-environment analysis. Location type I consists of a total of 21 ports suitable for defense due to the sand spit in all the sides and because it is located in the bay of small and medium rivers. Location type II is composed of 22 ports close to the open seas, and location type III consists of a total of 12 ports centering on the bay. A total of nine ports satisfied the location factor in the shortest distance analysis(targeting location type I), 15 ports in the slope analysis, 13 ports in the hinterland analysis, 13 ports in the visibility analysis, and 11 ports in the ocean current analysis. It was found in the final evaluation that the I level regions consist of two ports(Obunjin and Mangyangjin). Obunjin has a location characteristic that is advantageous for defense and that makes it suitable to serve as an anchorage harbor for a large-scale fleet as its water level is deep and as it has a wide embayment. In conclusion, Obunjin is considered the outport that has the highest possibility of serving as Isabu's departure port for the conquest of Usanguk.

• Journal of Environmental Impact Assessment
• /
• v.20 no.5
• /
• pp.697-703
• /
• 2011

The purpose of this study aims to preserve biodiversity in increasingly fragmented green patches for spatial analysis of planting on the eco-corridors and to optimize the target species, the location, width, cross section of the eco-corridors. It was suggested that eco-corridors should have to planned at early stages of road planning so that the number and locations of eco-corridors in advance. Ecological corridor is the facility to connect two habitats fragmented by road, dam, housing and industrial area. And, everyone agree that ecological corridor is important useful structural component that help animal movement in fragmented landscapes. However, ecological corridors have many problems of the recorded the size of corridor, planting species to nearby exiting vegetation species and structure. The most important facts that there are no consideration for location of animal migration and behavior using eco-corridors. This study was carried out to spatial analysis of eco-corridors location, satellite data and GIS were used to analyze for searching optimum location of the eco-corridors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.50-56
• /
• 2014

Recently Android apps utilizing location based services are widely used. Understanding the operation of the GPS location provider, among various location providers supported in the Android platform, is an essential task for developers using the Android. This paper, based on the analysis of source codes of the GPS subsystem in the Android platform, shows clearly and orderly the operation of the GPS location provider, in key threads' perspectives as well as in a stepwise fashion from the initialization up to the final location report steps.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.1
• /
• pp.29-35
• /
• 2003

This paper presents a fault location algorithm when there are parallel circuits in power system networks. In transmission networks, a fault location method using the distribution factor of fault currents is introduced and in distribution networks a method using direct 3-phase circuit analysis is developed, because the distribution networks are unbalanced. The effect of parallel circuits in fault location is studied in this paper. The effect is important for the range of protecting zones of distance relay in transmission networks and fault location in distribution networks. The result of developed fault location algorithm shows high accuracy in the simulation that using the EMTP.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.2
• /
• pp.115-126
• /
• 2015

Although the frequency of use for community facilities in rural villages is growing as well as the importance of the facilities for urban-rural exchange is being highlighted, study on spatial location-analysis of the facilities for such multi-purpose is not so much. This study aims to find the spatial distribution forms of community facilities in rural villages such as community center and rural-pocket park through location-analysis, in order to provide available data for selecting location in the future. As the study area, Sojeong-myeon, Sejong Special City was selected. This study conducted GIS analysis for criteria of the location-evaluation model developed in this study. This study introduced the concept of time-distance for accessibility analysis. This paper also used linear-consecutive scoring method(LCSM) as a scoring method of criteria and Analytic Hierarchy Process(AHP) method for weighting values of criteria. The application results showed that the new model can generate the intensity of community facilities according to spatial distribution and accessibility from cities to the facilities.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.2
• /
• pp.19-27
• /
• 2008

Ecosystem fragmentation by human intervention breaks down the biosphere habitat. Wildlife corridors connect biosphere habitats to maintain ecosystem continuity and provide animals with connecting routes. In Korea, there are 17 existing wildlife corridors on highways (as of December, 2006. Korea Freeway Corporation). There are 24 highway routes, 2,923km of highway(as of December, 2004. Korea Freeway Corporation). However, wildlife corridors are not enough and roadkill increases every year, so we need to construct additional wildlife corridors on highways. This study proposes a new approach to the location of wildlife corridors on highways, using a comprehensive analysis method for main location elements, and applies it to a study area. First, it examines traditional approaches to location of wildlife corridors through literature review and field study to analyze the present conditions of existing wildlife corridors. Then, it developes a comprehensive analysis method for the location of wildlife corridors. (1) Field investigation : investigate planting, water bodies and so on. (2) Roadkill analysis : roadkill counts, locations, time, and so on. (3) Monitoring : animal traces were surveyed and sensor cameras were installed to determine target species. (4) Simulation for animal movement : most probable wildlife dispersal was simulated by a computer software. (5) A new comprehensive approach overlays all analysis on a map and determines the location of proposed new wildlife corridors. In conclusion, it proposes an over-bridge type wildlife corridor in Dalnaenae Hill (413-414km from Busan) and an underpass type near the entrance to Gwanhyun temple way (415-416km from Busan). This new approach based on roadkill data, computer simulation of wildlife dispersal, monitoring of animals, and site analysis, may contribute to better location of wildlife corridors on highways.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.12
• /
• pp.129-135
• /
• 2021

Injection molding is a manufacturing method of melting the polymer resin and injecting it into a mold to molding it into the desired form. Due to the short molding time and outstanding formability, complex products can be shaped with high precision and it is the most widely used polymer molding method. However, there may be areas that are not filled depending on the location of the injection gate where polymer resin is injected. Formability is determined by deformation and surface precision due to the impact of residual stress after molding. Hence, choosing the location of the injection gate is very important and molding analysis of injection molding is essential to reduce the cost of the mold. This study evaluated the injection formability based on the location of the injection gate of the vertical machining center ATC tool port using injection molding analysis and the results were compared and analyzed. Injection molding analysis was conducted on filling, packing, and deformation according to the location of the gate of the ATC tool port. From each injection gate location, filling time, pressure, and maximum deformation were compared. At gate 2, conditions of molding time and the location of the gate were far superior in production and quality. Gate 2 produced the smallest deformation of 0.779mm with the best quality.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.2
• /
• pp.92-101
• /
• 1998

Location patterns of protected horticulture were analyzed using a multiple correspondence analysis(MCA). The analysis could be used in evaluating location suitability of protected horticulture. The location factors of the protected horticulture for MCA include land category, size of protected horticulture, land slope, topography, effictive soil depth, irrigation and drainage condition, distance from roads, and so forth. The results showed that there were three different location patterns of protected horticulture. The first pattern was characterized by their nearness to villages. The facilities of this pattern were mainly located near to residential area. The second pattern was of those found in plain area. The facilities of this pattern were large in scale and located in paddy field far from residential area. The facilities of the last pattern were small in scale and located on nonpaddy fields. They were mostly found in hilly or mountainous area.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.268-274
• /
• 2009

Human beings can represent state of mind such as psychological state, personality or emotional trouble by the pictures painted on one's own initiative. But in general, it is hard to understand a consulter's unconscious state through one's objective and intentional descriptions only. So one's psychological state and emotional trouble can be understood and cured by color and location information of objects drawn in one's picture. By this reason, a consultant can help and settle a consulter's growth stages of life and emotional trouble through treatment by pictures. In this paper, we proposed a method to find out state of sensitivity by analysis of color and location information represented in a picture and fuzzy inference rules. We applied the proposed method to the states of sensitivity from color information proposed by Alschuler and Hattwick and the psychological states from location information proposed by Grunwald. In the experimental results by the two applications, we verified the proposed sensitivity analysis method is efficient.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.773-782
• /
• 2008

This paper describes the method for proper location of protective equipment in underground distribution cable through field test and analysis at testing lines. To prove the reliability for analysis simulated by EMTP/ATPDraw, the testing results obtained by the real test and the analysis for the same test lines were compared each other. The accuracy of analysis was proved by the comparison. Over voltages were measured and analyzed at each point of cable and switches in case of which lightning surge current was applied. The analysing method was applied to real distribution systems to select the proper location of protective equipment. It is evaluated that the location of protective equipment was properly selected.