• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1207-1212
• /
• 2008

The purpose of this study is to evaluate the location of the outlets in the mechanical ventilation system installed in apartment. We performed the numerical analysis to estimate the ventilation effectiveness and the indoor $CO_2$ concentration considering the occupants and the condition with inlet and outlet in each room. From the numerical results, modified location of the outlets is about 10% high than designed one with respect to the ventilation effectiveness when the occupants are not considered. But designed location of inlet and outlet in living room and kitchen is better than modified one with respect to the reduction of $CO_2$ concentration in the living room and kitchen with occupants. In case of our model, Air change per hour (0.7) is not enough to sustain the acceptable criteria of $CO_2$ concentration (1000ppm) in the room with the occupants

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.2
• /
• pp.19-27
• /
• 2016

This study typified the rural centers with myeon locations in Hwasun-gun which showed comprehensive and various class types through settlement class structure analysis. It is also for establishing the awareness of strengthening functions and facilities of the centers and the directions of strengthening it. Subjects of the study could be classified into three types including base type (Neungju-myeon), general type (Nam-myeon) and decline type (Dongbok-myeon) through the analysis of settlement class structure. Neungju-myeon location as the base type could function as the myeon location by itself and tended to serve education, health and welfare functions through the strengthening of central living functions. Nam-myeon location as the general type required sports facilities management based on the vicinity and accessibility to the senior's welfare functions. Dongbok-myeon location as the decline type required the accessibility to public health facilities and the security of vicinity to the facilities because of its high population of the aged.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.59-64
• /
• 2010

This study is to determine an optimal marina's construction location candidate among many alternative candidates in order to obtain the maximized efficiency under the natural conditions. To deal with marina's construction location, the optimal construction location is selected using 10 important factor analysis for 10 candidates in Yeosu city. In this paper, the new model to assign the most reasonable alternative is introduced using 0-1 integer programming. This proposed model has not been applied in the optimal marina's facility candidate selection problem yet. This paper will contribute to determine the most reasonable alternative. Also, this proposal model can be applied to other marina's facility candidate selection problem in other regions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.5968-5973
• /
• 2014

The gate location in injection molding has a significant influence on the quality and productivity. Therefore, injection molding CAE is used to determine the gate location. With increasing injection molding CAE and the adoption of a 3D mesh, which takes more computation time for analysis, gate location optimization in the shortest time and least resources is the most challenging issue. In this paper, we propose a methodology for optimization based on the flow length to consider the flow balance and weld line. In addition, the flow balance is obtained in the disc-type plate while the weld lines exit the slit-holes to avoid a stress concentration.

• Journal of the Speleological Society of Korea
• /
• no.88
• /
• pp.38-44
• /
• 2008

This study aims to identify the efficiency by applying diverse index to the positions of vertex in the network among the network analysis methods in order to identify the relational location features of caves. The first consideration was about the relational location features according to the linking degree and centrality of cave. The second consideration was about the structural equivalence between caves or between caves and the surrounding tourists attractions. A variety of index examined in this study is very efficient for identifying the positions of caves in the network. Furthermore, the relational location features in consideration of surrounding tourists attractions identified the availability of more objective and quantitative expression. In particular, when there are other caves around a cave, it is also very useful to identify the structural equivalence or comparison with other caves.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.440-447
• /
• 2011

Selecting a suitable place is to determine the attributive conditions and qualified areas for the aim as factors and is to be fulfilled systematically for selecting the area which satisfies all these. This research tries to achieve a rational suitability analysis of residential development using the GIS modeling method and the hierarchical analysis process. A spatial and attributive analysis has been systematized for selecting a suitable place for the study and GIS analysis model has been used for the effective conclusion drawing for different levels. As a next step, a quantitative and qualitative evaluation index was created through complex consideration of the criteria and decision factors of the location selection, and weights were added depending on the relative importance of these factors. In particular, 3D terrain model simulation method has been used in order to reflect the aesthetic factors of the scenery which is an element of the subjective evaluation factors and considered qualitative and subjective evaluation factors which were not considered for the existing AHP technique. After the research, a location that satisfies complex requirements was found rapidly and accurately through the GIS model and hierarchical analysis.

• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.243-248
• /
• 2007

The durability of a cylinder head is influenced by the thermal and mechanical history during the manufacturing process, as well as engine operation. In order to improve the durability of cylinder head, both load from engine operation and the preload conditions from the manufacturing process must be considered. The aluminum cylinder head used for a HSDI diesel engine is investigated to reduce the possibility of high cycle fatigue crack in this study. FE analysis is performed to elucidate the mechanism of high cycle fatigue crack in the HSDI diesel cylinder head. Two separate approaches to increase the durability of the cylinder head are discussed: reducing load from engine operation and re-arranging preload conditions from the manufacturing process at the critical location of the cylinder head. Local design changes of the cylinder head and modification of pretension load in the cylinder head bolt were investigated using FE analysis to relieve load at the critical location during engine operation. Residual stress formed at the critical location during the manufacturing process is measured and heat treatment parameters are changed to re-arrange the distribution of residual stress. Results of FE analysis and experiments showed that thorough consideration of the manufacturing process is necessary to enhance the durability of the cylinder head.

• Journal of the Korean Regional Science Association
• /
• v.9 no.2
• /
• pp.103-119
• /
• 1993

This research examines the spatial development of rural industrial estates (Nong-gong Jigu) in Chonbuk province and gives insight into the strategies for economic development in the entire region. Selected location factors which are likely to pull new investment into the estates are examined by using questionnaires. Few loction factors except nonlocal factors can be found in explaining why location choices are made. The irrelevance of the analysis based on location factors suggests that an alternative approach should analyze changes in the spatial development of the rural industrial estates. Such an alternative is to understand the dynamics of the spatial organization of production by focusing on characteistics of plant closing in the rural industrial estates. To take into account of the characteristics of plant closing we provide the hypothesized relationships between employment size, organizational structure, inter and intra industrial linkage, characteristics of production processes, and availability of local labor market and the likelihood of closing. A logit model is then made to identify the selected factors which might influence the probability of plant closing. The results from the logit analysis and their implications suggest that the policy should be more concerned with the characteristics of firms, such as size and ownership, as well as of the local labor markets. Given that the Chonbuk region has experienced rapid population decline, together with its poor industrial base, it seems that the success of the policy in the declined rural areas in less certain.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2885-2890
• /
• 2011

Simulation study were performed for fire location effect on the smoke spread in the deeply-underground subway station(DUSS). In this research, Shingumho station (The line # 5, Depth: 46m) has been selected as case-study for the analysis of smoke-spread effect with the different fire location. Field test data measured for actual fan in DUSS was applied as a condition of a simulation. The whole station was covered in this analysis and 4 million grids were generated for this simulation. The fire driven flow was analyzed case by case to compare the smoke-spread effect according to the fire location. In order to enhance the efficiency of calculation, parallel processing by MPI was employed and LES(large eddy simulation) method in FDS code was adopted.

• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.659-668
• /
• 2006

Various schemes for mobility support are currently proposed in NGN. However the performance comparison of all existing schemes is not relatively examined as yet. Therefore, in this paper, we investigate the location registration and handover procedure of MIPv6, IP2, Q.MMF, IMS, compare and analyze the location registration time and cost and handover latency time using various performance parameters and simulation for the performance analysis. As a result of analysis, when Location Manager locates in the center of core network, IP2 showed better performance than other schemes.