• Title/Summary/Keyword: Local level

검색결과 3,846건 처리시간 0.04초

제주도 난대림에서 노루 뿔의 성장과정에 의한 어린나무 박피에 관한 연구 (Peeling Damage of Sapling caused by the Developing Process of Roe Deer Antlers in Warm-temperate Forests of Jeju Island)

  • 김은미;박영규;권진오;김지은;강창완;이치봉
    • 한국농림기상학회지
    • /
    • 제14권4호
    • /
    • pp.254-259
    • /
    • 2012
  • 산림에서 나무껍질이 벗겨지는 피해는 노루를 비롯한 사슴과에 속하는 포유류에 의해 발생하며 먹이 부족이 주요 원인이다. 그러나 제주도에서는 뿔이 녹각으로 되는 과정에서 벨벳을 벗겨내는 행동에 의해 나무껍질이 벗겨지는 피해가 발생하여 이들을 살펴보았다. 국립산림과학원 한남시험림내의 해발 400m에서 500m 사이에 위치한 6km구간의 임도 주변 5m지역을 대상으로 2011년 9월 9일부터 10월 4일까지 맑은날을 택하여 본조사를 실시하였다. 노루가 뿔로 긁은 피해목은 총 25종, 267본이었으며 낙엽활엽수가 18종 134본, 상록활엽수가 5종 71본, 나머지 2종 62본은 침엽수였다. 뿔 긁기로 가장 선호하는 수종은 굴거리나무(Daphniphyllum macropodum), 삼나무(Cryptomeria japonica), 비목(Lindera erythrocarpa), 누리장나무(Clerodendrum trichotomum), 산초나무(Zanthoxylum schinifolium) 순이었다. 피해목은 주로 3~4년생의 어린나무이며 평균 수고는 $120.7{\pm}42.4cm$이었고, 지상 5cm 높이에서의 직경은 $1.5{\pm}0.5cm$, 피해 시작점(최저점)은 지상에서부터 평균 $22.1{\pm}10.1cm$ 지점이었고, 피해길이는 평균 $27.5{\pm}10.6cm$이었다. 나무껍질이 벗겨지면 이차적으로 균류의 침입을 받게 되며 이로 인해 어린나무의 외형이 변하거나 죽게 되어 난대림의 향후 종 구성에 영향을 야기할 수 있다. 기후변화에 따른 제주도 산림의 식생변화가 예견되는 시점에서 노루의 뿔에 의한 피해는 난대림의 자연 갱신은 물론 조림과 묘목생산 그리고 지속적인 산림경영에 영향을 미칠 것으로 판단된다.

국내 온대 혼효림에 서식하는 산림성 조류의 번식기 개체군 모니터링 방법에 대한 비교 (Comparison of Population Monitoring Methods for Breeding Forest Birds in Korean Temperate Mixed Forests)

  • 남현영;최창용;박진영;허위행
    • 한국산림과학회지
    • /
    • 제108권4호
    • /
    • pp.663-674
    • /
    • 2019
  • 조류는 포획과 채집에 의존하지 않고 관찰 조사를 통해 서식 현황을 평가할 수 있는 유용한 생태계 지표이다. 그러나 우리나라의 산림성 조류의 개체군 변동을 파악하기 위한 통일된 모니터링 지침이 아직 없으며 이를 위한 자료도 부족한 실정이다. 따라서 본 연구는 이를 위한 기초 자료를 제공하기 위해 실시되었으며, 중부의 온대혼효림 두 곳에 서식하는 번식기 산림성 조류를 대상으로 가장 일반적으로 사용되는 선조사 및 조사시간이 다른 정점조사를 적용하여 그 조사 결과를 비교하였다. 단위 조사노력당 관찰되는 종수 및 개체수는 선조사와 정점조사간에 유의한 차이를 보이지 않았으나, 서로 다른 연구지역의 조류상 차이를 파악할 수 있는 것으로 나타났다. 정점조사에서는 단위 정점당 조사 시간이 길수록 종과 개체수가 많이 관찰되었으나, 조사횟수를 누적하면 뚜렷한 차이를 보이지 않았다. 정점조사와 선조사 모두 조사반경이 커질수록 단위 정점 또는 구간 내에서 더 많은 종과 개체수가 관찰되었으며, 정량적 또는 정성적인 목적에 따라 활용할 수 있도록 거리에 따라 구분하여 다층구조로 결과를 기록할 필요가 있다. 또한 조류의 관찰률은 일출 후 시간이 경과하면서 점차 감소하므로, 조사는 일출 후 4시간 이내의 가급적 이른 오전에 수행해야 하는 것으로 나타났다. 특정 지역의 산림성 조류의 전체 종 풍부도의 70%를 파악하기 위해서는 7.0-7.6시간이 소요되는 42회(95% 신뢰한계: 26-61회)의 3분 정점조사 또는 33회(95% 신뢰한계: 19-53회)의 5분 정점조사가 필요한 것으로 예측되었다. 반면 동일한 수준의 종 풍부도 파악을 위해서는 26회(95% 신뢰구간: 15-45회)의 200 m 세부구간에 대한 선조사가 필요하며, 이는 약 4.8시간이 소요되는 것으로 평가되었다. 따라서 선조사는 정점조사에 비해 대상 지역의 전체적인 종 풍부도를 파악하는데에는 보다 효율적인 방법으로 나타났다. 향후 산림성 조류조사의 목적과 규모, 현장상황 등에 따라 본 연구에서 확인된 조사방법을 택일하거나 병행하는 방법을 고려할 수 있다.

유엔의 북핵 대북제재조치의 실효성과 북한의 체제생존전략 (Efficacy of UN's Sanctions on North Korea's Nuclear and North Korea's Regime Survival Strategy)

  • 김주삼
    • 한국과 국제사회
    • /
    • 제2권1호
    • /
    • pp.69-92
    • /
    • 2018
  • 북한은 2006년 1차 핵실험을 시작으로 2017년 9월까지 총 6차례의 핵실험을 감행하였다. 북한은 미국의 대북적대시 정책에 대응하기 위한 일환으로 체제수호와 방어적 차원에서 핵무장력 담보 전략을 전개하고 있다. 그러나 북한 핵실험의 전략적 목표가 북미협상을 통해 북한체제 위기를 극복하고 그들의 한반도 사회주의통일을 위한 핵무장력을 완성하는 데 있음은 주지의 사실이다. 북한의 계속된 핵실험은 한반도평화를 위협하는 직접적인 요인이 되고 있으며, 동북아안보 역학구도에 간접적인 요인으로 작용하고 있다. 유엔안보리는 이러한 북한의 무모한 핵실험에 대해 지난 10년 이상 6차례의 유엔안보리 결의로 대북제재조치를 단행해 왔다. 그러나 북한 김정은 정권은 유엔과 미국 등 국제사회의 대북제재 조치에도 불구하고 핵 경제병진노선을 고수하겠다는 입장이다. 유엔과 미국의 대북제재조치가 북한에 대한 효과적인 영향을 주지 못한 것은 북한이 강도높은 핵실험으로 격상시키는데 요인으로 분석된다. 2017년 미국의 트럼프 행정부가 대북제재 조치 수단 가운데 하나인 대북 군사옵션은 한반도에서의 전면전과 국지전 양상으로 예상된다. 미 트럼프 행정부는 이전의 미국 행정부의 대북제재 조치 양상과는 다르게 세컨더리 보이콧이라는 외교압박전술을 시도하고 있다. 그럼에도 불구하고 북한은 유엔과 미국의 대북제재조치에 대해 북 미 간 전면적인 군사대결 입장을 밝히며 '벼랑끝 전술'로 맞서고 있다. 북한은 당분간 체제생존차원에서 핵 경제병진노선을 추진할 것으로 판단된다. 북한체제는 미 중 간의 현실주의적 국가전략 추진으로 체제붕괴 변수가 나타날 수 있다는 점에서 북한의 전략적 선택의 폭은 좁아진다.

경사지반에서 얕은터널의 굴착에 따른 지표침하에 대한 실험적 연구 (Experimental study on the ground subsidence due to the excavation of a shallow tunnel)

  • 박찬혁;이상덕
    • 한국터널지하공간학회 논문집
    • /
    • 제19권5호
    • /
    • pp.761-778
    • /
    • 2017
  • 도시 내에서 기반시설을 확충하기 위해 지하공간의 활용이 급증하고 있으며, 이에 따라 얕은터널의 수요가 늘고 있다. 도시 내 얕은터널은 자체 안정성 뿐만 아니라 상부 건축물과 터널 주변 지중매설물의 안전성도 확보해야 하는 특성이 있다. 지금까지 얕은터널에 대한 연구는 천단부나 측벽부 등 국부적 변형에 따른 주변지반 거동에 집중되었고 터널 전체의 변형에 따른 주변지반의 거동을 연구한 예가 거의 없다. 따라서, 본 연구에서는 터널 전체의 변형에 의해 발생되는 주변지반 거동의 모형시험을 수행하여 분석하고 그 안정성을 검토하였으며, 이를 위해 터널 상부지표의 경사와 토피별로 구분하여 모형시험을 수행하였다. 모형터널(폭 300 mm, 높이 200 mm)은 도로 2차선 터널 단면을 기준으로 수직 수평방향으로 동시에 내공변위가 일어나도록 제작하였으며, 모형지반은 3가지 규격(직경 4 mm, 6 mm, 8 mm)의 탄소봉으로 조성하였고, 터널 전체를 변형시키면서 터널 토피와 상부지표의 경사에 따른 지표침하, 천단하중, 측벽하중, 하중전이를 측정하였다. 그 결과 얕은터널의 지표침하는 터널상부에서 가장 크게 발생하였고, 터널에서 멀어질수록 감소하여 일정영역을 벗어나면 발생하지 않았으며, 경사지에서는 토피가 높은 곳의 지표침하가 넓게 나타났다. 천단하중과 측벽하중은 지표경사의 영향이 뚜렷하였으나 토피가 일정깊이 이상이면 지표경사의 영향을 받지 않았다. 터널의 하중전이는 수평지표에서는 토피가 높을수록, 경사진 지표에서 지표가 높을수록 하중전이 폭이 넓고 크기가 작게 나타났으며, 경사진 지표 하부 얕은 터널에서는 토피가 낮은 쪽의 터널 측벽부 주변 하중전이가 뚜렷하게 나타났다.

PM10이 A549 Cells에서 전염증성 Cytokine발현에 미치는 영향 (Particulate Matter from Asian Dust Storms Induces the Expression of Proinflammatory Cytokine in A549 Epithelial Cells)

  • 김정호;전효근;김미경;경선영;안창혁;이상표;박정웅;정성환
    • Tuberculosis and Respiratory Diseases
    • /
    • 제60권6호
    • /
    • pp.663-672
    • /
    • 2006
  • 연구배경: 미세먼지는 여러 가지 유기물과 무기물의 복합체로 그 구성 성분이 시간과 장소에 따라 다르고 모양과 크기도 일정하지 않으며, 특히 지름 $10{\mu}m$이하의 미세먼지 (particulate matter 10; $PM_{10}$)는 흡입이 가능한 입자의 크기여서 하부기관지 및 폐의 가스-교환부분까지 침착하여 호흡기계에 손상을 일으킬 수 있다. 본 연구에서는 황사에 포함된 $PM_{10}$과 비황사 시기에 포집된 $PM_{10}$이 폐상피세포주에 작용하여 전염증성 사이토카인(proinflammatory cytokine) 및 cytokine messenger RNA(mRNA)의 발현에 어떤 영향이 있는지를 관찰하여 기관지 천식과 만성 폐쇄성 폐질환등 호흡기 질환의 증상 악화기전에 미치는 역할을 규명하고자 하였다. 연구방법: 공기 포집기(HV 500F, sibata model)를 이용하여 황사와 비황사 기간에 하루 6시간씩 실외의 장소에서 대기분진을 membrane filter에 포집한 다음, $PM_{10}$입자를 추출하고 폐암 상피세포주인 A549 cells(한국세포은행주)에 $PM_{10}$을 농도에 맞게($10{\mu}g/ml$, $100{\mu}g/ml$, $500{\mu}g/ml$) 노출시켰다. 각각의 노출된 세포로부터 interleukin(IL)-$1{\alpha}$, $IL-1{\beta}$, IL-8, granulocyte macrophage colony stimulating factor(GM-CSF)의 mRNA를 역전사중합효소연쇄반응(reverse transcriptase polymerase chain reaction; RT-PCR) 방법으로 측정하였다. 결 과: 황사 및 비황사 기간 중 포집된 $PM_{10}$을 가했을 시 가하지 않은 대조군에 비하여 $IL-1{\alpha}$, $IL-1{\beta}$, IL-8, granulocyte macrophage colony stimulating factor (GM-CSF)의 m'RNA와 cytokine의 발현이 유의하게 높았으며, 황사 기간의 고농도의 $PM_{10}$에 노출된 세포의 $IL-1{\alpha}$ mRNA는 비황사 기간의 $PM_{10}$에 노출된 세포의 mRNA보다 증가되어 있었다. 결 론: $PM_{10}$은 A549 cells에서 전염증성 사이토카인의 발현을 증가시키고 비황사 기간보다 황사 기간 중 대기 중에서 채취한 $PM_{10}$에 노출된 A549 cells에서 일부의 전염증성 사이토카인의 mRNA발현을 더욱 증가시키는 것을 알 수 있었다. 따라서 황사 기간의 $PM_{10}$에 의한 일부의 전염증성 사이토카인의 발현 증가가 만성 호흡기 질환의 증상 악화기전에 연관되어 있을 가능성을 시사하였다.

Hardware Approach to Fuzzy Inference―ASIC and RISC―

  • Watanabe, Hiroyuki
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
    • /
    • pp.975-976
    • /
    • 1993
  • This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

  • PDF

커뮤니티디자인의 전개와 논의의 특징 (The Development and Features of Discussion about Community Design)

  • 김연금;이영범
    • 한국조경학회지
    • /
    • 제40권3호
    • /
    • pp.22-31
    • /
    • 2012
  • 본 연구는 근래 체계적 논의 없이 현장 중심적으로 '커뮤니티디자인'이라는 용어가 사용되고 있는 것을 문제 상황으로 진단하고 다양한 문헌 검토를 통해 커뮤니티디자인의 개념적 특징을 살펴보았다. 커뮤니티디자인은 지리적 접근성이라는 공통점을 가진 개인이 밀집하여 거주하는 지역에 대한 디자인으로서의 커뮤니티디자인, 1960년대 미국에서 사회 운동으로 시작되어 커뮤니티의 참여, 민주적 의사 결정, 소통, 협력 등을 중시하는 커뮤니티디자인, 두 가지로 구분할 수 있는데, 본 연구는 후자를 다룬다. 후자로서의 커뮤니티디자인의 경우, 종합적 계획이론에 대한 대안 중 하나인 '옹호적 계획(advocacyplanning)'의 등장과 맥을 같이 한다. 신도시 건설 및 도로 확장 같은 대규모 개발 계획에 따른 기존 커뮤니티 붕괴는 당시 일었던 시민권리운동의 영향으로 반대 운동을 야기했고, 전문가 집단 내부에서도 약자를 옹호하자는 옹호적 계획과 이의 영향을 받아 디자인 과정에 커뮤니티를 참여시키자는 커뮤니티디자인이 제시되었다. 이후 커뮤니티디자인은 커뮤니티디자인센터를 통해 실천적, 이론적으로 발전해 나갔다. 1980년대 초반부터 시작된 커뮤니티디자인 관련 논의의 특징을 살펴보았을 때, 먼저 커뮤니티디자인은 커뮤니티의 물리적 환경과 지역사회 여러 제반문제와의 관계를 중시한다. 두 번째는 커뮤니티의 참여로 많은 연구들에서 커뮤니티의 참여를 커뮤니티디자인의 핵심으로 본다. 이와 관련해서는 참여의 효과와 단계, 청소년의 참여가 중요하게 논의된다. 세 번째는 소통방식과 관련된 논의다. 1960년대 커뮤니티디자인이 시작된 이후 커뮤니티디자인센터를 중심으로 효과적인 소통 증진을 위한 다양한 참여기법이 개발되었다. 네 번째는 미적인 질을 중시하는 디자이너의 태도와 커뮤니티 요구반영와 관련된 것이다. 이 둘을 길항관계로 보는 경우가 있으며, 이는 촉진자로서의 디자이너의 역할에 대한 논의로 연결되기도 한다. 커뮤니티디자인이 확산되고 있는 시점, 이를 실천할 수 있는 제도적, 정책적 검토가 필요할 것이며, 전문가의 역할과 교육에 대한 검토도 필요할 것이다. 커뮤니티디자인은 비록 운동으로 시작되었지만, 추후 이론화 작업과 다양한 논의를 통해 실천에 의미가 부여되었고, 시대적, 장소적 맥락에 맞는 방향성이 제시되었다. 즉, 실천과 이론이 상호 작용하며 발전적 순환을 이루고 있는 것이다. 이에 본 연구는 우리나라에서의 커뮤니티디자인의 실천과 이론의 선순환에 기여할 수 있으리라 본다.

형태학과 문자의 모양을 이용한 뉴스 비디오에서의 자동 문자 추출 (Automatic Text Extraction from News Video using Morphology and Text Shape)

  • 장인영;고병철;김길천;변혜란
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제8권4호
    • /
    • pp.479-488
    • /
    • 2002
  • 최근 들어 인터넷 사용의 증가와 더불어 디지털 비디오의 수요 또한 급격히 증가하고 있는 추세이다. 따라서 디지털 비디오 데이타베이스의 인덱싱을 위한 자동화된 도구가 필요하게 되었다. 디지털비디오 영상에 인위적으로 삽입되어진 문자와 배경에 자연적으로 포함되어진 배경문자 등의 문자 정보는 이러한 비디오 인덱싱을 위한 중요한 단서가 되어질 수 있다. 본 논문에서는 뉴스 비디오의 정지 영상에서 뉴스 자막과 배경 문자를 추출하기 위한 새로운 방법을 제안한다. 제안된 알고리즘은 다음과 같이 세 단계로 구성된다. 첫 번째 전처리 단계에서는 입력된 컬러 영상을 명도 영상으로 변환하고, 히스토그램 스트레칭을 적용하여 영상의 수준을 향상시킨다. 이 영상에 적응적 임계값 추출에 의한 분할 방법을 수정 적용하여 영상을 분할한다. 두 번째 단계에서는 적응적 이진화가 적용된 결과 영상에 모폴로지 연산을 적절하게 사용하여, 우선 문자 영역은 아니면서 문자로 판단되기 쉬운 양의 오류(false-positive) 요소들이 강조되어 남아있는 영상을 만든다. 또한, 변형된 이진화 결과 영상에 모폴로지 연산과 본 논문에서 제안한 기하학적 보정(Geo-corrertion) 필터링 방법을 적용하여 문자와 문자로 판단되기 쉬운 요소들이 모두 강조되어 남아있는 영상을 만든다. 이 두 영상의 차를 구함으로서 찾고자 하는 문자 요소들이 주로 남고, 문자가 아닌 문자처럼 보이는 오류 요소들은 대부분 제거된 결과 영상을 만든다. 문자로 판단되는 양의 오류 영역들을 남기는데 사용된 모폴로지 연산은 3$\times$3 크기의 구조 요소를 갖는 열림과 (열림닫힘+닫힘열림)/2 이며, 문자 및 문자와 유사한 요소들을 남기는데 사용된 연산은 (열림닫힘+닫힘열림)/2와 기하학적 보정이다. 세 번째 검증 단계에서는 전체 영상 화소수 대비 각 후보 문자 영역의 화소수 비율, 각 후보 문자 영역의 전체 화소수 대비 외곽선의 화소수 비율, 각 외곽 사각형의 폭 대 높이간의 비율 등을 고려하여 비문자로 판단되는 요소들을 제거한다. 임의의 300개의 국내 뉴스 영상을 대상으로 실험한 결과 93.6%의 문자 추출률을 얻을 수 있었다. 또한, 본 논문에서 제안한 방법으로 국외 뉴스, 영화 비디오 등의 영상에서도 좋은 추출을 보임을 확인할 수 있었다.

화강암 지역 암반 지하수 내 불소 이온의 기원 및 거동: 충북 보은 삼승면 일대의 현장 조사와 실내 실험 연구 (The Origin and Geochemical Behavior of Fluoride in Bedrock Groundwater: A Case Study in Samseung Area (Boeun, Chungbuk))

  • 채기탁;고동찬;최병영
    • 지질공학
    • /
    • 제18권4호
    • /
    • pp.555-566
    • /
    • 2008
  • 불소 오염이 심각한 곳으로 파악된 충북 보은 삼승면 일대 지역의 오염의 현황과 원인 규명을 위하여 수리지구화학적 연구와 물암석 반응 실험 연구가 수행되었다. 조사 지역 암반 지하수의 불소 함량은 최대 3.9 mg/L에 이르며, 먹는물 수질기준의 불소 항목(1.5 mg/L)을 초과율은 23%에 이른다. 불소 이온의 평균 함량은 1.0 mg/L이나, 낮은 값으로의 왜도(1.3)가 크기 때문에 중앙값은 평균에 비하여 크게 적은 0.5 mg/L으로 나타난다. 불소 농도는 화강암 분포 지역에서 심부 지하수에 해당하는 $NaHCO_3$ 유형 지하수에서 상대적으로 높게 나타나고 있다. 불소와 질산염 이온($NO_3$)은 뚜렷한 부의 상관관계를 나타내고 있어 불소는 지표 오염과 상관없는 지질기원이며, 상대적으로 심부 암반 지하수에 부화되었을 가능성을 지시한다. 이것은 조사 지역의 암석을 사용한 실내 실험에서 확인되었다. 순수흑운모 화강암 반응 실험 결과 불소 함량은 96시간 후에 최대 1.2 mg/L까지 증가하였다. 그러나 불소 농도와 지하수 관정 심도, 지구화학적으로 물암석 반응의 정도를 지시할 수 있는 인자($Na^+$, $HCO_3$, pH 등)들의 값과는 뚜렷한 상관관계를 나타내고 있지 않았다. 이는 불소 이온이 물암석 반응 정도와 상관없이 함불소 광물의 국지적인 분포에 영향을 받을 수 있다는 것을 암시한다. 고농도의 불소를 함유하는 지하수의 공간분포는 선구조 분포와 연관되어 있음을 보여주고 있어, 물암석 반응이 상당히 진행되어 불소 함량이 높은 심부 암반 지하수가 선구조 분포 지역의 파쇄대를 통하여 배출되었음을 지시한다. 하지만, 선구조 분포와 불소 농도는 전체적으로는 일치하지 않아, 파쇄대의 분포가 불규칙적이고, 심부 지하수와 천부 지하수의 혼합과 정도 불균질함을 지시하는 것으로 추정된다.

치과코디네이터 업무 및 인식에 관한 조사연구 - 치과의사를 제외한 기타 인력을 중심으로 (A Research on Service and Awareness of Dental Coordinators by Manpower at Dental Care Service Institutions - Centering on Manpower Other than Dentists)

  • 최부근;한수진;권순복;정재연;조명숙;황윤숙
    • 한국치위생학회지
    • /
    • 제6권4호
    • /
    • pp.437-453
    • /
    • 2006
  • To analyze dental hygienists and other manpower at dental care service institutions where a dental coordinator was working among about 200 dental care service institutions in Seoul, Gyeonggi Province, and Incheon as of June 2005 for contents of training for dental coordinators, opinions of qualification of dental coordinators, present and future services provided by dental coordinators, and awareness of dental coordinators and to provide basic data about future services, roles, and cultivation of dental coordinators, a survey was conducted and 216 copies returned were analyzed, obtaining the following results. 1. 83.8 percent needed an educational program for dental coordinators as an educational content; 41.7% had awareness of the educational content; and 83.8 percent insisted that over the intermediate level of curricula should be taken. Dental coordinator cultivation institutions identified included the institution under the control of the Korean Dental Hygienists Association and the education center for the department of dental hygiene; 76.9% insisted that an appropriate qualifying examination should be necessary. They suggested the central government department and the local government as a certification institution; 39.4% insisted that financial support for the education should be provided by financing education alone. Only 28.7% experienced dental coordinator education and 73.1% hoped to serve as a dental coordinator. They were found to expect a rise in payment(64.4%) and in the title(46.8%) after completion of the educational program. 2. 66.2% saw a dental hygienist as the most appropriate for a dental coordinator; clinical career (39.4%) and practical capacity(29.2%) were suggested as requirements for a dental coordinator; and a period of over three years(47.2%) was suggested for appropriate dental career. 3. Dental coordinators' present services included 'reservation management' for customer management, 'staff service training' for organization management, 'understanding of customer reception attitudes and actions' for self-management, 'hospital information management' for hospital marketing, 'acceptance' for hospital affairs management, and 'hospital environment management' for hospital facilities management; their future services included 'acquisition of ability to use a foreign language' for self-management, followed by 'staff service training' for organization management, 'training and counseling' for customer management, 'acquisition of counseling capacity' for self-management, 'complaining customer reception' for customer management, and 'marketing strategy implementation' for hospital marketing. 4. After comparing dental hygienists and other manpower in terms of dental coordinators' future services, dental hygienists showed interest in 'acquisition of ability to use a foreign language,' 'staff service training,' 'complaining customer reception,' and 'acquisition of counseling capacity' while other manpower showed interest in 'acquisition of ability to use a foreign language,' 'document data management,' 'acquisition of basic service manner,' 'acquisition of counseling capacity,' 'manpower management,' 'establishment and evaluation of a marketing strategy,' and 'education and counseling.' 5. As for awareness of dental coordinators, they were thought of as helpful in improving image of a dental clinic; it was found that continuous training should be necessary to develop dental coordinators' capacity; dental coordinators' services should be important and contribute to patients' qualitative satisfaction.

  • PDF