• The Journal of the Korea Contents Association
• /
• v.15 no.4
• /
• pp.380-390
• /
• 2015

Because the local governments has closet contact for public services compared to central government, their role is important in the age when welfare issue is more important than before. So Local Public Finance being important than ever, but regrettably local financial issues related to the mostly negative. In particular, many local government face problem of local fiscal independence, as a result, they have hard time to secure financial resources. Reliant local finance by central government can be alternative, however, it causes negative effect for autonomous management of local finance and fiscal soundness. In this study, public data by public institutions is suggested as solution to secure financial resources. Although, utilization of public data is initial level, this paper deal with exploratory discussion for public data as self-reliant local finance with validity and suggestions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.1
• /
• pp.54-62
• /
• 2008

In this paper the fretting wear of press-fitted specimens subjected to a cyclic bending load was simulated using finite element analysis and numerical method. The amount of microslip and contact variable at press-fitted and bending load condition in a press-fitted shaft was analysed by applying finite element method. With the finite element analysis result, a numerical approach was applied to predict fretting wear based on modified Archard's equation and updating the change of contact pressure caused by local wear with influence function method. The predicted wear profiles of press-fitted specimens at the contact edge were compared with the experimental results obtained by rotating bending fatigue tests. It is shown that the depth of fretting wear by repeated slip between shaft and boss reaches the maximum value at the contact edge. The initial surface profile is continuously changed by the wear at the contact edge, and then the corresponding contact variables are redistributed. The work establishes a basis for numerical simulation of fretting wear on press fits.

• Toxicological Research
• /
• v.18 no.2
• /
• pp.175-181
• /
• 2002

Allergic contact dermatitis (skin sensitization) may be caused by a wide variety of chemicals. A murine local lymph node assay (LLNA) has been developed as an alternative to guinea pig models for assessing the contact sensitization potential of chemical. This study was carried out to evaluate the skin sensitization potential for chemicals in Balb/c mice by LLNA. Contact allergen, dinitrochlorobenzene (DNCB), respiratory allergen, toluene diisocyanate (TDI) and a weak allergen, $\alpha$-hexlycinnamaldehyde (HCA) were wed as positive chemicals and irritant, sodium lauryl sulfate(SLS) also wed as a reference chemical in this study. The weights of lymph node in the mice treated with DNCB, TDI, and HCA were increased compared to vehicle control. There was a significant increase in lymph node weight of mice treated with high concentration of SLS compared to vehicle control. The stimulation index (SI) of Lymph node cell in the mice treated with DNCB, TDI, and HCA revealed over three-fold increase compared to vehicle control by $3^H$-thymidine uptake. All allergens correctly identified in this LLNA study wing Balb/c mice. These results suggest that LLNA wing Balb/c mice could be a useful method for screening the allergenic potential of chemicals. The expression of IL-2 mRNA was slightly increased in draining auricular lymph node cell of the mice treated with TDI and HCA by RT-PCR. However the IL-2 levels in DNCB and SLS of treated animals were not significantly changed.

• Korean Journal of Materials Research
• /
• v.13 no.4
• /
• pp.233-238
• /
• 2003

Ferromagnetic tunnel junctions, Ta/Cu/Ta/NiFe/Cu/$Mn_{75}$ $Ir_{25}$ $Co_{70}$ $Fe_{30}$/Al-oxide, were fabricated by do magnetron sputtering and plasma oxidation process. The effect of annealing temperature on the local transport properties of the ferromagnetic tunnel junctions was studied using contact-mode Atomic Force Microscopy (AFM). The current images reflected the distribution of the barrier height determined by local I-V analysis. The contrast of the current image became more homogeneous and smooth after annealing at $280^{\circ}C$. And the average barrier height $\phi_{ave}$ increased and its standard deviation $\sigma_{\phi}$ X decreased. For the cases of the annealing temperature more than $300^{\circ}C$, the contrast of the current image became large again. And the average barrier height $\phi_{ave}$ decreased and its standard deviation $\sigma_{\phi}$ increased. Also, the current histogram had a long tail in the high current region and became asymmetric. This result means the generation of the leakage current that is resulted from the local generation of a low barrier height region. In order to obtain the high tunnel magnetoresistance(TMR) ratio, the increase of the average barrier height and the decrease of the barrier height fluctuation must be strictly controlled.led.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.155-161
• /
• 2018

A Si chip with the Cu/Au bumps of $100-{\mu}m$ diameter was flip-chip bonded using different anisotropic conductive adhesives (ACAs) onto the local stiffness-variant stretchable substrate consisting of polydimethylsiloxane (PDMS) and flexible printed circuit board (FPCB). The average contact resistances of the flip-chip joints processed with ACAs containing different conductive particles were evaluated and compared. The specimen, which was flip-chip bonded using the ACA with Au-coated polymer balls as conductive particles, exhibited a contact resistance of $43.2m{\Omega}$. The contact resistance of the Si chip, which was flip-chip processed with the ACA containing SnBi solder particles, was measured as $36.2m{\Omega}$, On the contrary, an electric open occurred for the sample bonded using the ACA with Ni particles, which was attributed to the formation of flip-chip joints without any entrapped Ni particles because of the least amount of Ni particles in the ACA.

• Transactions of Materials Processing
• /
• v.18 no.4
• /
• pp.342-346
• /
• 2009

Forming characteristics for the bundle extrusion of Cu-Ti bimetal wires are investigated, which can identify the process conditions for weak mechanical bonding at the contact surface during the direct extrusion of a Cu-Ti bimetal wire bundle. Bonding mechanism between Cu and Ti is assumed as a cold pressure welding. Then, the plastic deformation at the contact zone causes mechanical bonding and a new bonding criterion for pressure welding is developed as a function of the principal stretch ratio and normal pressure at the contact surface by analyzing micro local extrusion at the contact zone. The averaged deformation behavior of Cu-Ti bimetal wire is adopted as a constitutive behavior at a material point in the finite element analysis of Cu-Ti wire bundle extrusion. Various process conditions for bundle extrusions are examined. The deformation histories at the three points, near the surface, in the middle and near the center, in the cross section of a bundle are traced and the proposed new bonding criterion is applied to predict whether the mechanical bonding at the Cu-Ti contact surface happens. Finally, a process map for the direct extrusion of Cu-Ti bimetal wire bundle is proposed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.393-397
• /
• 2005

A process map has been developed, which can identify the process conditions for weak mechanical bonding at the contact surface during the direct extrusion of a Cu-Ti bimetal wire bundle. Bonding mechanism between Cu and Ti is assumed as a cold pressure welding. Then, the plastic deformation at the contact zone causes mechanical bonding and a new bonding criterion fur pressure welding is developed as a function of the principal stretch ratio and normal pressure at the contact surface by analyzing micro local extrusion at the contact zone. The averaged deformation behavior of Cu-Ti bimetal wire is adopted as a constitutive behavior at a material point in the finite element analysis of Cu-Ti wire bundle extrusion. Various process conditions for bundle extrusions are examined. The deformation histories at the three points, near the surface, in the middle and near the center, in the cross section of a bundle are traced and the proposed new bonding criterion is applied to predict whether the mechanical bonding at the Cu-Ti contact surface happens. Finally, a process map for the direct extrusion of Cu-Ti bimetal wire bundle is proposed.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.1-6
• /
• 2005

Stick type ignition coil is new development that connect directly with ECU(Electronic control unit), without needing a spark plug cable and distributor. Glass-fiber reinforced ploymeric composites provide the desirable properties of high stiffness and strength as well as low specific weight. Stick type ignition coil jacket is using PBT CF30 resin. PBT CF30 resin is a kind of electric insulation which is a superior engineering plastic that is used to prevent the leakage of the electrical current. If PET receive a mistake of design or excessive force when HV terminal oppress on jacket, it can happen to crack. Local stress concentrations occurring on the contact surface, the contact phenomenon becomes a direct cause to the wear and failure of mechanical structures. When it is cracked, it can allow a leakage of the electrical current. So, in this study, we analyze the contact stress to PBT jacket using ANSYS program, when HV terminal oppress on jacket. We suppose PBT to be Jacket and we analyzed contact stress that happens in PET like PBT analysis method. We compared the use of PBT and PET.

• The Korea Journal of Herbology
• /
• v.21 no.1
• /
• pp.9-15
• /
• 2006

Objectives : Lonicerae Flos has been known as a useful plant with anti-inflammatory, antioxidative and immunosuppressive activity. To evaluate anti-inflammatory effect of Lonicerae Flos, we treated Lonicerae Flos-skin in animal model system induced contact hypersensitivity. Methods : Contact hypersensitivity, a local inflammatory response of the skin, was induced by spreading the right ear of BALB/c mouse with 1% DNCB. Lonicerae Flos-skin was prepared by dissolving 1% water extract of Lonicerae Flos in skin vehicle and treated everyday for 2 weeks on the right ear. Results : Lonicerae Flos-skin significantly reduced a mouse ear thickness swelled by 1% of DNCB treatment compared with skin vehicle-treated control group. Lonicerae Flos-skin also reduced IgG and IgE in serum obtained from blood of 1% DNCB-treated mouse. Conclusion : These results showed that Lonicerae Flos-skin could be used as a pharmaceutical material with antiinflammatory effects by reducing IgG and IgE in contact hypersensitivity mouse model by DNCB.

• The Korea Journal of Herbology
• /
• v.24 no.2
• /
• pp.1-5
• /
• 2009

Objectives : HRHDT has been known as a useful prescription with antibiotic, anti-inflammatory, antioxidative and immunosuppressive activity. To evaluate anti-inflammatory effect of HRHDT, we treated HRHDT-skin in Balb/c mice model induced contact hypersensitivity. Methods : Contact hypersensitivity, a local inflammatory respinse of skin, was induced by spreading the back skin of Balb/c mice with 1% DNCB. HRHDT-skin was prepared by dissolving 3% 1,3-butylene glycol extract of HRHDT in solution and treated 2 weeks on the back skin. Results: HRHDT-skin significantly reduced TEWL and erythema by 0.4-1% of DNCB treatment compared with control group. HRHDT-skin reduced IgE on serum obtained from blood of DNCB-treated Balb/c mice. Histopathological examination showed that thickening of the epidermis, hyperkeratosis and the infiltration of inflammatory cells were found in Balb/c mice under conventional circumstances. Conclusions : These results showed that HRHDT-skin could be used as a pharmaceutical material with antiinflammatory effects by reducing IgE in contact hypersensitivity dermatitis Balb/c mice by DNCB.