• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.277-280
• /
• 2007

Field emission-back light unit (FE-BLU) was fabricated using carbon nanotube (CNT) emitter. Local dimming and local brightening techniques were achieved, which results in very high contrast ratio. In addition, the motion blur phenomenon, one of the serious problems of liquid crystal display (LCD) with cold cathode fluorescent lamp (CCFL)-BLU, was removed from LCD-TV by using FE-BLU.

• Current Optics and Photonics
• /
• v.4 no.4
• /
• pp.380-390
• /
• 2020

In this study, the traditional electron-blocking layer (EBL) in (In,Ga)N/GaN light-emitting diodes is replaced by a circular EBL that is the same size as the n-pad. The three-dimensional (3D) nonlinear Poisson, drift-diffusion, and continuity equations are adopted to simulate current transport in the LED and its characteristics. The results indicate that the local carrier-density distribution obtained for the circular EBL design is more uniform than that for the traditional EBL design. This improves the uniformity of local radiative recombination and local internal quantum efficiency (IQE) at high injection levels, which leads to a higher lumped IQE and lower efficiency droop. With the circular EBL, the lumped IQE is higher in the outer active region and lower in the active region under the n-pad. Since most emissions from the active region under the n-pad are absorbed by the n-pad, obviously, an LED with a circular EBL will have a higher external quantum efficiency (EQE). The results also show that this LED works at lower applied voltages.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.3
• /
• pp.7-13
• /
• 2014

As issues on light pollution is being raised recently, movements to prevent light pollution is being implemented by each local government, such as by enforcing the Light Pollution Act from February 2013, in order to require compliance with the light-emitting permission level of existing lighting facilities. However, despite the regulations, no specific measures on products are being prepared. Thus, this Research has designed a light shield as a measure to minimize the burden of the effectiveness and time required for development and the burden of the cost necessary to re-install existing light facilities in its entirety and reviewed the effect of the measure through the BUG ratings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.666-671
• /
• 2016

This paper introduces a device providing close local lighting to the affected part, where the operation-purpose astral lamp alone cannot shed light directly, in an operation room of hospitals or clinics, which helps clinical doctors perform safe treatment of the affected part deep inside a human body. This medical assisting lighting is a device necessary to prevent fatal operation failures, which can occur with minute operation processes, such as tumor removal or angiorrhaphy. The components, such as the light source and power supply were designed to be low power consuming and small in size, have a narrow angle lens was used to increase the light spreading effect and focused illumination. The end-caps of the light transmission device using an optical cable and the lighting device were designed in the waterproof type to enable disinfection of these devices after use for the next patients. According to the measurement of the light source properties made after development of the retractor lighting device, the illumination intensity was 490 lux, the brightness was $11,550cd/m^2$, general color rendering index was 78, color temperature was 11,000K, and the intensity distribution was even, which were confirmed to be adequate for medical assisting local lighting.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.623-628
• /
• 2019

The aim of this study was to design fast non local means (FNLM) noise reduction algorithm and to confirm its application feasibility in light microscopic image. For that aim, we acquired mouse first molar image and compared between previous widely used noise reduction algorithm and our proposed FNLM algorithm in acquired light microscopic image. Contrast to noise ratio, coefficient of variation, and no reference-based evaluation parameter such as natural image quality evaluator (NIQE) and blind/referenceless image spatial quality evaluator (BRISQUE) were used in this study. According to the result, our proposed FNLM noise reduction algorithm can achieve excellent result in all evaluation parameters. In particular, it was confirmed that the NIQE and BRISQUE evaluation parameters for analyzing the overall morphologcal image of the tooth were 1.14 and 1.12 times better than the original image, respectively. In conclusion, we demonstrated the usefulness and feasibility of FNLM noise reduction algorithm in light microscopic image of small animal tooth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.1155-1172
• /
• 2015

In this paper, we propose a novel saliency detection framework based on illumination invariant features to improve the accuracy of the saliency detection under the different light conditions. The proposed algorithm is divided into three steps. First, we extract the illuminant invariant features to reduce the effect of the illumination based on the local sensitive histograms. Second, a preliminary saliency map is obtained in the CIE Lab color space. Last, we use the region growing method to fuse the illuminant invariant features and the preliminary saliency map into a new framework. In addition, we integrate the information of spatial distinctness since the saliency objects are usually compact. The experiments on the benchmark dataset show that the proposed saliency detection framework outperforms the state-of-the-art algorithms in terms of different illuminants in the images.

• Journal of Korean Society of Transportation
• /
• v.14 no.1
• /
• pp.165-177
• /
• 1996

Recently, many local governments suffering from traffic congestion have plans to introduce light weight (mid-size) rail transit systems, since the systems' investment costs are known to be much less than heavy rail transits such as the subway in Seoul. Most of the governments expect private partners to be involved in the systems' constructions and operations mainly because of their financial difficulties. Since the governments do not have experiences of evaluating and selecting privately financed transportation systems, they may need an evaluation guideline. This paper discusses evaluation criteria, methodologies, and procedures which will be helpful to local governments faced with evaluating light weight rail transit systems proposed by private companies.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.971-972
• /
• 2006

We have demonstrated Carbon Nanotube Back Light Unit (CNT-BLU) which has a triode structure. Local dimming scheme was introduced to the BLU driving system. With this driving method, contrast ratio enhanced 20 times higher than that of conventional Cold Cathode Fluorescent Lamp (CCFL) BLU.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.2
• /
• pp.104-109
• /
• 2011

I present a method of aspheric surface profile measurement using 2nd derivative of local area profile. This method is based on the principle of curvature sensor which measures the local 2nd derivative under test along a line. The profile is then reconstructed from the data on the each point. Unlike subaperture-stiching method and slope detection method, 2nd derivative method has strong points from a geometric point of view in measuring the aspheric surface profile. The second derivative terms of surface profile is an intrinsic property of the test piece, which is independent of its position and tip-tilt motion. The curvature is measured at every local area with high accuracy and high lateral resolution by using White-light scanning interferometry.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.107.1-107.1
• /
• 2011

현재 상용으로 많이 사용되는 p-type 태양전지는 Dopant로 사용된 Boron이 $O_2$와 결합하면서 Light induced degradation이 발생하여 태양 전지 효율의 감소를 불러일으키는 단점이 있다. 이러한 문제를 해결하기 위하여 여러 가지 방법들이 제시되었는데 일반적으로 n-type wafer를 이용함으로써 Light induced degradation을 해결하는 방법이 주로 사용된다. n-type 태양전지를 제조함에 있어서 보다 높은 효율을 달성하기 위하여 태양전지 후면 구조에 local contact 개념을 도입하여 rear local emitter를 형성함으로써 전체적인 효율 증가를 도모하였다. 이러한 local contact을 제조하기 위해서는 전기적으로 구조적으로 고려할 사항들이 여러 가지 존재한다. 따라서 우리는 이러한 고려 사항들을 실험적인 방법으로 결정하는 것이 아니라, 정교한 변수 통제를 이용한 시뮬레이션으로 최종적인 효율 상승을 가져오는 조건을 찾으려고 한다. 이때 사용될 수 있는 시뮬레이션은 여러 가지 종류가 존재하는데 우선 상용 태양전지의 해석에 가장 많이 사용되는 PC1D프로그램이 있다. 그러나 PC1D의 경우에는 1차원의 해석만 가능하기 때문에 local contact의 2차원 이상의 구조 변화에 따른 최종적인 효율을 계산하는데 무리가 따르게 된다. 따라서 2차원 이상의 형상에 대한 분석이 가능한 프로그램을 이용하여 실제 셀에서 일어나는 현상을 더 정밀하게 모사함으로써 local contact에서 일어나는 전기적, 구조적 변화가 최종적인 효율에 어떻게 영향을 미치는지를 파악해볼 것이며, 어떤 구조를 선택하였을 때 가장 높은 효율을 달성할 수 있는지 알아보려고 한다.