• Korean Journal of Ecology and Environment
• /
• v.40 no.1
• /
• pp.31-39
• /
• 2007

Monitoring data of 48 agricultural irrigation reservoirs from 1999 to 2004 was analyzed for water quality characteristics including biochemical oxygen demand $(BOD_5)$, chemical oxygen demand (COD), total nitrogen (TN), total phosphorus (TP), and chl-${\alpha}$. Land uses of the watersheds associated with these reservoirs were determined for residential, forest, upland, paddy and miscellaneous, and regressed against water quality characteristics. Correlation analysis showed that forest land use was negatively correlated with all the water quality characteristics implying it's beneficial effects in water quality perspectives. Other land uses including residential, upland, and paddy generally illustrated positive correlation with water quality characteristics, which indicates most human activities of the watershed could degrade water quality of the receiving water bodies. Paddy land use partially contributed to the water quality degradation in contrast to the previous studies. It might be attributed to the relatively clean water quality of the study area, where even slight pollutant loading could degrade sensitively water quality. Further investigation is recommended for the effect of proximity as well as land use portions on the water quality of receiving water body.

• Korean Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.368-377
• /
• 2012

This study evaluated the water quality of Yeongsan River by multivariate analysis using the data collected during 2001~2010. Water quality in Yeongsan River could be explained up to 75.2% by four factors, which were included in loading of nutrients (32.021%) and organic matters (17.453%), seasonal variation (14.775%) and microbes (10.951%). The results of cluster analysis were classified into three groups by factor 1 and 2, which has different water quality characteristics. Group 1 included sampling stations located in the upper stream and estuary dyke of Yeongsan River, group 2 included Gwangju 1 and Gwangsan affected by domestic sewage of Gwangju-cheon, and group 3 included sampling stations located in the midstream around the livestock farm and farmland.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.381-392
• /
• 2002

This study attempted to indentify changeability of the factorial structure of kinematic analysis in bowling. Subjects of group composed of three groups : Higher bowers who are national representative bowers with 200 average point and one pro-bowler. Middle bowlers who are three common persons with 170 average points. Lower bowler who are three common persons with 150 average points. Motion analysis on throw motion in three groups respectively has been made through three-dimension cinematography using DLT method. Two high-speed video camera at operating 180 and 60 frame per secondary. T-test factorial structure analysis has been used to define variable relations. It was concluded that : 1. The difference of x1, x2, x4, x8, x9, x11, x12, x13 where significant between two group. 2. The difference of number of spin and angle of the back-hand where statistically significant between two group(p<.001, p<.05) 3. The correlation over r=.5 between the kinematic data x1, x2, x3, x9, x10, x11. In the rotation loading matrix Factor 1 was x1, x2, x9, x10 and Factor 2 relates to x3, x11. 4. In order to obtain the factor score as follow as ; Factor 1 = (0.248)X1 + (0.265)X2 + (-0.074)X3 + (0.259)X9 + (0.259)X10 + (-0.025)X11 Factor 2=(-0.016)X1 + (-0.055)X2 + (0.84)X3 + (-0.013)X9 + (-0.007)X10 + (0.553)X11.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.153-170
• /
• 2011

OMTP (Open Mobile Terminal Platform) is a global forum made by telecommunications providers to promote user-oriented mobile services and data business. Devised by OMTP, BONDI is a browser-based application or a mobile web run-time platform to help widgets make good use of functions of mobile devices in a secure way. BONDI enables applications programmed with web standard technologies such as HTML, JavaScript, CSS, and AJAX to reach the internal functions of mobile devices. Since BONDI, which is not just a simple network application, can reach the internal resources of devices in standard ways, it enables the application and widgets to be developed regardless of tile OS or platform. Web browser-based widgets are vulnerable to the network environment, and their exeeution speed can be slowed as the operations of the widgets or applications become heavy. However, those web widgets will be continuously used thanks to the user-friendly simple interface and the faster speed in using web resources more than the native widgets inside the device. This study suggested a method to effectively operate and manage the resource of OMTP BONDI web widget and then provided an improved result based on a running performance evaluation experiment. The experiment was carried to improve the entire operating time by enhancing the module-loading speed. In this regard, only indispensable modules were allowed to be loaded while the BONDI widget was underway. For the purpose, the widget resource list, able to make the operating speed of the BONDI widget faster, was redefined while a widget cache was employed. In addition, the widget box, a management tool for removed widgets, was devised to store temporarily idle widgets.

• Korean Journal of Environment and Ecology
• /
• v.23 no.6
• /
• pp.569-576
• /
• 2009

Sediment and nutrient loading caused by the removal of forest cover and alteration of agricultural lands in catchments have led to the deterioration in Lake Shirarutoro. To examine the effects of deforestation and agricultural activities on water quality, I examined changes in total nitrogen (TN) and total phosphorus (TP) of lake water induced by land use change, and compared them with the various research data produced over the years. Our investigation showed that the level of TN and TP in the lake water decreased when forest cover increased but increased when farmland area increased. The concentration of TN and TP was high in Lake Shirarutoro despite that its catchment was surrounded by large forests and small farmlands. This result indicates that land uses near Lake Shirarutoro have affected the quality of the lake water. I have examined the changes of sediment yield in the lake's catchment over the last approximately 300 years. Eleven core samples were obtained from the lake sediment and analyzed to establish a chronology after using two tephra layers (Ko-c2 in 1694 and Ta-a in 1739) and a $^{137}Cs$ peak (in 1963). The average sediment yield under the natural condition during the first two periods was 8.4 tons/$km^2$/year in 1694~1739 and 8.9 tons/$km^2$/year in 1739~1963 respectively. The conversion of the Shirarutoro catchment into agricultural lands and deforestation intensified, leading to an increased sediment yield of 21.1 tons/$km^2$/year during 1963~2007.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.11-18
• /
• 2005

In order to accurately assess the stresses occurring in the early-age concrete, a compliance function which can consider the characteristics of early-age concrete is required. Existing compliance functions, however, have the limit that they have been deduced from the data of hardened concrete and therefore, do not take into account the fast development of material properties in early-age concrete. Furthermore, the distinction between instantaneous compliance and creep compliance is not clear in the existing experimental method. The purpose of present study is to propose a compliance function which can describe the rapid change of hardening processes in early-age concrete. To this end, a test method which can estimate the instantaneous compliance without creep effects in the early-age concrete was suggested first. Based on the suggested experimental method, tests on the instantaneous as well as creep compliance were performed using MTS automatic servo-loop test machine. The test results showed that both instantaneous and aging viscoelastic compliance, which are constants in B3 model, were functions in terms of age of concrete especially at early ages. Therefore, the modified compliance function based on B3 model was proposed to provide more realistic prediction on the behavior of early-age concrete. It is expected that the present model allows more realistic evaluation of varying stresses in concrete structures at early ages.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.37-45
• /
• 2006

For treating a huge amount of plastic waste with the environment problem, pyrolysis of plastic waste into alternative fuel oil is one or important issue in recycling methods. This study was introduced over the trend or generation of plastic waste, in Korea pyrolysis technology in domestic and foreign countries, basic technology in pyrolysis process and new technology of pyrolysis developed in KIER (Korea Institute of Energy research). The characteristics of process developed in KIER are the continuous loading treatment or mixed plastic waste with an automatic control system, the minimization of wax production by circulation pyrolysis system in non-catalytic reactor, the reuse of gas produced and the oil recovery from sludge generated in pyrolysis plant, which have greatly the advantage economically and environmetally. The experiment result data in 300 ton/yr pilot plant showed about $81\;wt\%$ liquid yield for 3 days continuous reaction time, and also the boiling point distribution of light oil (LO) and heavy oil (HO) produced in distillation tower was a little higher than that of commercial gasoline and diesel, respectively.

• Ocean and Polar Research
• /
• v.38 no.3
• /
• pp.171-184
• /
• 2016

In order to assess the level of contamination and identify the priority contaminants in the Busan coast, intensive sediment sampling was conducted and persistent organic pollutants and heavy metals were analyzed. The Sediment Quality Index (SQI) was derived based on the contaminant data by comparing with Sediment Quality Guidelines (SQGs) established in Korea, Canada, and Australia/New Zealand. Toxic contaminants were found to be widely distributed across the coast. Among organic contaminants, PAHs showed the highest concentration, followed by butyltins, nonylphenols, PBDEs, DDTs, PCBs, HCHs and CHLs. Heavy metals were also abundantly detected with the highest concentration of Zn followed by Cu > Cr > Pb > Ni > As > Cd > Hg. Compared to organic contaminants, most heavy metals, except for Cu and Hg, were homogeneously distributed along the coast in a good relationship with total organic carbon of sediment particles. In general, the concentrations of organic compounds and heavy metals were highest at the inner part of harbor areas with a tendency to decline from inside areas to the outside, indicating the high loading of pollutants from harbors. A high exceedance for low-SQGs and high-SQGs was found for TBT, p'-DDT, p,p'-DDD, Cu and Zn. The SQI scores calculated from low-SQGs and high-SQGs were in the range of 18-100 and 54-100, respectively. The inner part of Busan Harbor, Dadaepo Harbor, and Gamcheon Harbor were observed as being regions of concern. Overall, TBT, Cu, and p,p'-DDT were the chemicals most frequently exceeding SQGs and influencing SQI scores.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.175-185
• /
• 2014

This study is to develop a fatigue scale for the private security guard for a private security guard to effectively manage fatigue were tested for validity and reliability. To achieve that, this study employed purposive sampling to draw 300 samples among private security guards working for the security firms registered in Seoul District Police Office as of 2014, and used 259 samples for final analysis. Fatigue scale was developed on the basis of the scale development methods and procedures in previous studies. For data processing, SPSSWIN 18.0 program was applied to conduct exploratory factor analysis, reliability analysis, and correlation analysis, and AMOS 18.0 program was employed to conduct confirmatory factory analysis. This study came to the following conclusion. First, the validity of the fatigue measurement tool was high. In other words, content validity was high, and construct validity was also high. The factor loading of exploratory factor analysis was .452, and the standard value of confirmatory factor analysis was .403. Therefore, the tool satisfied the basis value of fit index. The sub categories of fatigue, finally drawn from validity test, were mental fatigue, nervous system dysfunction, physical deformity, and exhaustion. Secondly, the reliability of the fatigue measurement tool was high. In other words, according to item analysis, the correlation between items and their sub categories, and between items and total score was more than .602, relatively high. And the reliability coefficient (Cronbach's ${\alpha}$) was high, or more than .658. Fatigue Scale tool will be developed by private security guards in the present study is to measure the validity and reliability verification is clearly tired of the private security guards than the tools that are used in other studies in the existing area.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.9
• /
• pp.667-674
• /
• 2014

A ship's propulsion shafting system is subjected to varying magnitudes of intermittent loadings that pose great risks such as failure. Consequently, the dynamic characteristic of a propulsion shafting system must be designed to withstand the resonance that occurs during operation. This resonance results from hydrodynamic interaction between the propeller and fluid. For ice-class vessels, this interaction takes place between the propeller and ice. Producing load- and resonance-induced stresses, the propeller-ice interaction is the primary source of excitation, making it a major focus in the design requirements of propulsion shafting systems. This paper examines the transient torsional vibration response of the propulsion shafting system of an ice-class research vessel. The propulsion train is composed of an electric motor, flexible coupling, spherical gears, and a propeller configuration. In this paper, the theoretical analysis of transient torsional vibration and propeller-ice interaction loading is first discussed, followed by an explanation of the actual transient torsional vibration measurements. Measurement data for the analysis were compared with an applied estimation factor for the propulsion shafting design torque limit, and they were evaluated using an existing international standard. Addressing the transient torsional vibration of a propulsion shafting system with an electric motor, this paper also illustrates the influence of flexible coupling stiffness design on resulting resonance. Lastly, the paper concludes with a proposal to further study the existence of negative torque on a gear train and its overall effect on propulsion shafting systems.