• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.1 s.139
• /
• pp.10-17
• /
• 2005

Due to emission of vehicles during loading/unloading, ventilation system in Roll-on/Roll-off ship is inevitable; however it is very difficult to predict the ventilation performance before it is finally built in. Although the requirements for the ventilation system include air change rate and maximum allowable concentration of CO in the cargo holds, even prototype tests are hardly able to quantify the ventilation performance. In the present paper, a new method to assess the ventilation performance of Roll-on/Roll-off ship is proposed by using computational fluid dynamics. The air exchange is modeled by introducing multi-species transport of existing air In the holds and new air from the ventilation system. Conservation of multi-species as well as 3D Navier-Stokes equation are solved numerically in time dependent manner. Several cases of different configuration are considered. The results include predicted mass fraction of new air in the holds. It is also presented that CO concentration can be estimated based on the predicted air change performance. Due to the lack of experimental data, the computed results are not verified; however the proposed method can be applied as au assessment tool.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.332-339
• /
• 2006

A leaf spring suspension has been widely used since it can carry big load and simplicity. But one major drawback is the poor ride performance because of the friction in the system and the high stiffness coefficient. To overcome these, air spring suspension can be used. The air spring suspension system can improve the ride of the heavy vehicle significantly and also it can adjust the height to the loading and unloading. A truck with the leaf suspension system is modified with the air suspension system and the performance of the vehicle is compared using the suggested method. The existing leaf suspension can be replaced with the air suspension system to improve the performance.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.43-54
• /
• 2006

The scope of this paper covers the applications of bender element tests in consolidation, tomography, and liquefaction. Loading and unloading time during consolidation are evaluated based on shear wave velocity. As S-wave velocity is dependent on effective stress, the loading step may be determined. However, cautions are required due to the different mechanism between the settlement and effective stress criteria. The stress history may be evaluated because the S-wave shows the cement controlled regime and stress controlled regimes. A fixed frame complemented with bender elements permits S-wave tomography The tomography system is tested at low confinement within a true triaxial cell. Results show that shear wave velocity tomography permits monitoring changes in the velocity field which is related to the average effective stress. To monitor the liquefaction phenomenon, S-wave trans-illumination is implemented with a high repetition rate to provide detailed information on the evolution of shear stiffness during liquefaction. The evolution of shear wave propagation velocity and attenuation parallel the time-history of excess pore pressure during liquefaction. Applications discussed in this paper show that bender elements can be a very effective tool for the detection of shear waves in the laboratory.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.3
• /
• pp.291-297
• /
• 2015

A water jet cleaning robot system for micro drill bits is to refurbish micro drill bits used for the PCB manufacturing process. It can refurbish drill bits with the minimum diameter of ${\phi}0.15{\sim}0.075mm$ of which the total quantity have been discarded before. Micro drill bits with the minimum diameter of ${\phi}0.075mm$ can be cleaned by applying the water jet cleaning robot system out of the manual ultrasonic cleaning in the past for the cleaning equipment as the initial process in refurbishing. This study analyzed problems, while applying the apparatus mechanism for the workability such as the robot traces of Transfer Robot I and II, drill bit loading and unloading, and cleaning tasks in the water jet cleaning robot system in an effort to carry out simulations. In addition, the cleaning work process was optimized as the work process was verified in advance and the production quantity was analyzed through simulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.127-130
• /
• 2009

In this paper, we introduce a Y/T(Yard Tractor) Multi-Cycle System on the basis of RTLS that improves a low efficient loading and unloading. In the proposed approach, we apply the best suited algorithm looking for seeking of the optimum path and the shortest movement distance. In this paper, Our experiment results show that rate of a driving distance is reduced more than 12% compared to the average value, and that is reduced more than 23% compared to the maximum value.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.122-128
• /
• 2020

This research investigates how a Virtual Reality (VR)-based simulation could be used to train safe operation skills for forklift operators. Forklift operation is categorized as high-risk work by many occupational health and safety regulators and authorities due to high injury and fatality rates involved with forklifts. Therefore, many safety guidelines have been developed for forklift operators. Typically, forklift operation safety training is delivered based on instructional texts or videos, which have limitations in influencing people's safety behavior. Against this background, we propose a VR-based forklift simulator that can enable safe operation skills training through a feedback system. The training program consists of several modules to teach how to perform the basic tasks of forklift operation, such as driving, loading and unloading, following the safety guidelines. The system provides instantaneous instructions and feedback regarding safe operation. This training system is based on the model of "learning-by-doing". The user can repeat the training modules as many times as necessary before being able to perform the given task without violating any safety guidelines. The last training module tests the user's acquisition of all safety skills required. The user feedback from several demonstration sessions showed the potential usefulness of the proposed training system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.867-874
• /
• 2015

Hoist have been installed at wharfs or seashore in the center of fishing village fraternities. A Hoist is used in harbor loading and unloading fishing gear or seafoods and is a device to refloat fishing boats into a breakwater or land in case of typhoon or bad weather. In this paper, we propose image perception and moving objects tracking system that detects boat's damage, theft and trespassing occurred at the wharf. This system detects objects' motion in real time by using the motion templet and tracks to concentrate on a moving object(person, boat, etc.) by using a PTZ camera.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.12 s.117
• /
• pp.1215-1223
• /
• 2006

A leaf spring suspension has been widely used since it can carry big load and its simplicity. But one major drawback is the poor ride performance because of the friction in the system and the high stiffness coefficient. To overcome these, an air spring suspension can be used. The air spring suspension system can improve the ride of the heavy vehicle significantly and also it can adjust the height to the loading and unloading. The road tests for the truck with the leaf spring suspension and air spring suspension are performed to compare the ride quality of the two systems. To develop the air spring suspension system tailored to the target truck, chassis development procedure using CAE has been applied.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.944-957
• /
• 2007

In general mechanical servo systems, friction deteriorates the performance of controllers by its nonlinear characteristics. Especially, friction phenomenon causes steady-state tracking errors and limit cycles in position and velocity control systems, even though gains of controllers are tuned well in linear system model. Even if sensor is used higher accuracy level, it is difficult to improve tracking performance of the position to the same level with a general control method such as PID type. Therefore, many friction models were proposed and compensation methods have been researched actively. In this paper, we consider that the variation of mover's mass is various by loading and unloading. The normal force variation occurs by it and other parameters. Therefore, the proposed control system is composed of main position controller and a friction compensator. A parameter estimator for a nonlinear friction model is designed by adaptive control law and adaptive backstopping control method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.2
• /
• pp.323-329
• /
• 2001

In this paper, we present a collaborative method for material delivery using a distributed vehicle agents system. Generally used AGV(Autonomous Guided Vehicle) systems in FA require extraordinary facilities like guidepaths and landmarks and have numerous limitations for application in different environments. Moreover in the case of controlling multi vehicles, the necessity for developing corporation abilities like loading and unloading materials between vehicles including different types is increasing nowadays for automation of material flow. Thus to compensate and improve the functions of AGV, it is important to endow vehicles with the intelligence to recognize environments and goods and to determine the goal point to approach. In this study we propose an interaction method between hetero-type vehicles and adaptive fuzzy logic controllers for sensor-based path planning methods and material identifying methods which recognizes color. For the purpose of carrying materials to the goal, simple color sensor is used instead vision system to search for material and recognize its color in order to determine the goal point to transfer it to. The proposed method reaveals a great deal of improvement on its performance.