• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권6호
• /
• pp.537-553
• /
• 2016

This paper addresses the safety of two-row tank design by performing the extensive sloshing model tests. Owing to the uncertainties entangled with the scale law transforming the measured impact pressure up to the full scale one, so called comparative approach was taken to derive the design sloshing load. The target design vessel was chosen as 230 K LNG-FPSO with tow-row tank arrangement and the reference vessel as 138 K conventional LNG carrier, which has past track record without any significant failure due to sloshing loads. Starting with the site-specific metocean data, ship motion analysis was carried out with 3D diffraction-radiation program, then the obtained ship motion data was used as 6DOF tank excitation for subsequent sloshing model test and analysis. The statistical analysis was carried out with obtained peak data and the long-term sloshing load was determined out of it. It was concluded that the normalized sloshing impact pressure on 230 K LNG-FPSO with two-row tank arrangement is higher than that of convectional LNG carrier, hence requires the use of reinforced cargo containment system for the sake of failure-free operation without filling limitation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.151-158
• /
• 2000

The lateral deformation of one row pile groups was investigated based on analytical study and a numerical analysis. The emphasis was on quantifing the load transfer of pile groups subjected to lateral soil movement. An analytical method to consider pile-soil interaction in weathered soil was developed using load-transfer curve methods. Through the comparative study, it is found that the prediction by present approach is in good agreement with the general trend observed by in-situ measurements.

• 한국지반환경공학회 논문집
• /
• 제11권3호
• /
• pp.17-22
• /
• 2010

본 연구에서는 풍화토 지반에 설치된 수평하중을 받는 H-pile 무리말뚝의 하중분담특성 및 상호작용계수(p-multiplier)를 분석하였다. 말뚝의 배열($2{\times}3$, $3{\times}3$), 말뚝의 간격(2D, 4D, 6D), 그리고 지반밀도(상대밀도:40%, 80%)를 고려한 수평재하 실험을 실시한 결과 다음과 같은 결과를 얻을 수 있었다. 무리말뚝내 각각의 말뚝에 작용된 평균수평하중은 말뚝의 수가 감소할수록 평균수평저항력이 증가하는 것으로 나타났다. 말뚝간격과 지반밀도에 따라 단말뚝과 무리말뚝의 p-y곡선을 분석한 결과 말뚝간격이 2D에서 6D로 증가함에 따라 무리말뚝의 상호작용계수값이 느슨한 지반의 경우 0.85~0.94(앞열말뚝), 0.57~0.79(중간말뚝), 0.60~0.71(후열말뚝), 조밀한 지반의 경우 0.76~0.82(앞열말뚝), 0.58~0.73(중간말뚝), 0.53~0.70(후열말뚝)의 값을 각각 나타냈다. 이와같이 단말뚝과 무리말뚝간 상호작용계수는 말뚝간격이 증가할수록 그 값이 증가함을 알 수 있었으며, 또한 앞열의 무리말뚝이 중간 및 후열말뚝들보다 보다 큰 상호작용계수 값을 나타냈다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제19권2호
• /
• pp.171-188
• /
• 2015

In this paper, the efficient column-wise/row-wise lattice reduction (LR) updating and downdating methods are developed and their complexities are analyzed. The well-known LLL algorithm, developed by Lenstra, Lenstra, and Lov${\acute{a}}$sz, is considered as a LR method. When the column or the row is appended/deleted in the given lattice basis matrix H, the proposed updating and downdating methods modify the preconditioning matrix that is primarily computed for the LR with H and provide the initial parameters to reduce the updated lattice basis matrix efficiently. Since the modified preconditioning matrix keeps the information of the original reduced lattice bases, the redundant computational complexities can be eliminated when reducing the lattice by using the proposed methods. In addition, the rounding error analysis of the proposed methods is studied. The numerical results demonstrate that the proposed methods drastically reduce the computational load without any performance loss in terms of the condition number of the reduced lattice basis matrix.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.743-745
• /
• 1996

This paper presents an approach for the analysis of static voltage stability in power system. The proposed approach is based on multiple load flow calculation method using the redistribution algorithm of transmission loss, with which more realistic load flow solution can be obtained in the near of voltage collapse point. Some simulation results of the proposed approach show that the accuracy of static voltage stability analysis can be increased.

• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1554-1567
• /
• 2005

When multiple robotics systems with several sub-chains grasp a common object, the inherent force redundancy provides a chance of utilizing internal loading. Analysis of grasping space based internal loading is proposed in this work since this method facilitates understanding the physical meaning of internal loadings in some applications, as compared to usual operational space based approach. Investigation of the internal loading for a triple manipulator has been few as ,compared to a dual manipulator. In this paper, types of the internal loading for dual and triple manipulator systems are investigated by using the reduced row echelon method to analyze the null space of those systems. No internal loading condition is derived and several load distribution schemes are compared through simulation. Furthermore, it is shown that the proposed scheme based on grasping space is applicable to analysis of special cases such as three-fingered and three-legged robots having a point contact with the grasped object or ground.

• 전자공학회논문지A
• /
• 제31A권3호
• /
• pp.39-46
• /
• 1994

CMOS LCD driving circuits using poly-Si TFT have been designed and basic blocks including test patterns have been fabricated. Column driver drives the pixels by block because polu-Si TFT can not operate at the speed of video signal. Row driver has mode selection circuit which can select a mode between interlacing mode and non-interlacing mode. Experimental results show shift register can operate at 1MHz colck frequency with 4pF load.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.257-262
• /
• 1996

The characteristics of adjuster rods have been studied for the application to DUPIC core in two aspects: the half an hour xenon override capability and power flattening. The transient analysis has shown that the adjusters used for CANDU 6 have the reactivity worths more than required to override xenon load for DUPIC core. Parametric study has shown that removing 7 adjuster rods in the middle row and adjusting the strength of the rest of adjuster rods can provide the performances no worse than those of natural uranium core.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.231-240
• /
• 1988

본 연구에서는 외압을 받는 공기윤활 저어널 베어링의 정적인 경우에 대해 증분법과 유한요소법을 적용하고 유량계수는 실험을 근거로 하여 포켓에서 베어링 내부로 유입될 때의 유압손실을 고려한 Pink와 Stout의 값을 이용하였다.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.242-247
• /
• 2010

This paper introduces a real-time load flow program for Korean energy management system(EMS). This study is concentrated on the following aspects. First, we propose the model of the real-time database and power system equipment for the real-time load flow. These models are extracted from the needs of load flow functions and are designed to the application common information. Second, several techniques are applied for the efficient convergence and computational speed. The generation/load mismatch is redistributed using generator participation factors which are separated to the reference bus. For the voltage control, the jacobian matrix is composed with the basic Y matrix elements and the voltage control elements. Through the optimally ordering, jacobian row and column for a column is changed. However all jacobian matrix entries have same order with the Y matrix. The proposed program is tested using the Korea Electric Power Corporation(KEPCO) system. Through the test, we verified that the proposed program can be effectively used to accomplish the Korean EMS system.