• 한국컴퓨터산업학회논문지
• /
• 제5권4호
• /
• pp.511-516
• /
• 2004

본 논문에서는 움직임 추정을 위한 저전력 VLSI 구조를 제안한다 제안하는 방법은 systolic 구조에서 전처리 연산을 하여 불필요한 블락 정합 위치를 예측한다. 따라서 그 위치의 블락 정합을 하지 않음으로써 연산량을 줄이는 효과가 있다

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.15-18
• /
• 2002

Power supply technique for electrodeless lamps, especially Endura of Osram, is presented in this paper. The power supply uses a conventional power factor correction technique due to its proved performance. But in the inverter stage, resonant converter with parallel loading scheme is used to mitigate the variation of matching circuit characteristics by time varying load. Less performance but sufficient to predict future success compared to Osram's one is verified as a result of experiment of the prototype.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.13-16
• /
• 2004

Power supply technique for electrodeless lamps is presented in this paper. The power supply uses a conventional power factor correction technique due to its proved performance. But in the inverter stage, resonant converter with parallel loading scheme is used to mitigate the variation of matching circuit characteristics by time varying load. Experiment and performance comparison for both Endura md QL are performed and further study to commercialization are discussed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.859-864
• /
• 2001

For earthquake resistance design, a response modification factor is used to reduce the design strength and it reflects ductility, reserve strength, redundancy and damping effect. But this factor has not theoretical basis. In this study, two response modification factors are compared and analyzed for shear wall apartment building.; the one is introduced by ATC-19 Procedures, the other is suggested FEMA-273 and ATC-40 through nonlinear static analysis. For the results, ATC-19 procedure gives a reasonable estimation to R factor. But $R_{u}$ by using FEAM-273 and ATC-40 methods is estimated so small in case of a minor or moderate earthquake region. Due to this fact, response modification factor is smaller than suggested load criterion 3.0. So, it needs to decrease wall volume and reduce the global strength and system stiffness for proper ductile behavior matching to domestic load criterion.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권7호
• /
• pp.872-880
• /
• 1999

This paper presents an algorithm that can calculate the evaluation index of power system from the transfer capability point of view. The algorithm adopts a successive linear programming skill to solve an optimal solution. Two indices which are transfer margin index and economic matching index have been developed. Prior to calculating these indices, Maximum Load supplying Capability(MLSC) and Economic Load Supplying Capability(ELSC) are utilized as basic data. For man-machine interface, graphical user interface has been implemented so that an unified software package PSTCP(Power System Transfer Capability Program) has been developed. KEPCO systems planned up to 2006 year have been tested to show effectiveness and usefulness of the PSTCP for power system planning stages.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.90-95
• /
• 2003

For the safety driving of an automobile which is become individual requisites, a new Neural Network algorithm which recognized the load vehicles in real time is proposed. The proposed neural network technique is the real time computation method through the inter-node diffusion. In the network, a node corresponds to a state in the quantized input space. Each node is composed of a processing unit and fixed weights from its neighbor nodes as well as its input terminal. The most reliable algorithm derived for real time recognition of vehicles, is a dynamic programming based algorithm based on sequence matching techniques that would process the data as it arrives and could therefore provide continuously updated neighbor information estimates. Through several simulation experiments, real time reconstruction of the nonlinear image information is processed. 1-D LIPN hardware has been composed and various experiments with static and dynamic signals have been implemented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1865-1867
• /
• 2000

The pulse power system has been widely used to many applications. such as E/P(Electrostatic Precipitator), DeNOx/DeSOx power system, ozon generator. etc. A pulse energy efficiency for load depend on the rising time, peak value, pulse duration, impedance matching. etc. The pulse generator generally required for short pulse duration, high peak value was forced to consider its size and economy. In this study, developing a compact pulse generator that applied for Cascading method to be made of two pulse transformer, we compared cascading voltage with no cascading one by applying the pulse energy to load.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.99-105
• /
• 2010

This paper discussed the theoretical simulation results for developing the blumlein pulsed power source and showed the circuit configuration and the discharge characteristics of the realistic manufactured pulsed power system. In the simulation, the output voltage characteristics at a load resistor showed the general impulse shape when the impedance of a single coaxial cable is matched with the that of a load resistor. In addition, it is confirmed that output values of the pulsed power can be easily controlled by the duplication of coaxial cables and the pulsed waveform showed the general impulse characteristics. Specifically, the inception discharge voltage in the gap distance of 5[mm] between needle and plane electrodes is about 20[kV] and which is lower than about 29[kV] in 9[mm] due to the difference of the reaching time of the inception voltage. Therefore, this paper showed that the output voltage of the blumlein pulsed power source can be easily controlled.

• 에너지공학
• /
• 제8권4호
• /
• pp.583-591
• /
• 1999

본 연구에서는 전력 시스템의 신뢰도 지수의 산정을 위하여, 모멘트 대입방법을 사용하여 정전 빈도수와 지속시간 계산에 대한 새로운 접근방법을 제시하였다. 두가지의 방식이 표현되었으며 그 첫 번재로 공급지장 기대치(LOLE) 와 두번째로 공급지장 빈도수(LOLF)를 계산하였다. 이러한 표현은 지수의 조합으로 되어 있으며 따라서 쉽게 적분이 가능하며 빠른 계산이 가능하다. 본 논문에서는 이러한 지수 분포함수의 계수를 구하기 위하여 유전알고리즘과 콤플렉스 방법을 사용하였으며 제안된 계산방식은 정확성과 효율성 측면에서 다른 방법과 비교하여 매우 우수함을 보이고 있다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.434-439
• /
• 2012

This paper presents a nontraditional laser power system in which an active compensated pulsed alternator (ACPA) drives a flashlamp directly without the use of capacitor groups. As a result, the volume of the laser system is decreased because of the high energy density of the ACPA. However, the difficulty in matching the output of the alternator with the laser flashlamp is a significant issue and needs to be well analyzed. In order to solve this problem, based on the theory for ACPA, the authors propose a simplified model for the system of ACPA with flashlamp load by the way of circuit simulation. The simulation results preliminarily illuminate how the performance of the ACPA laser power system is affected. Meanwhile, the simulation results can also supply a consultation for future ACPA laser power system design and control.