• Fire Science and Engineering
• /
• v.23 no.1
• /
• pp.21-32
• /
• 2009

In order to inspect the danger of forest fires, the thermal characteristics and the ignitability of the dead leaves and the living leaves for the main species of trees in Youngdong areas have been studied by the TG/DTA and the group flammability tester. From this work, the thermal delay has been increased with the increase of the heating rate. The fractions of the thermal weight loss for the dead leaves and the living leaves of the coniferous trees were higher than those of the broadleaf trees. Also, it was confirmed that the ignitable dangers of the dead leaves and the coniferous trees were higher than those of the living leaves and the broadleaf trees, due to the low auto ignition temperature and thermal resistance.

• The Korean Journal of Ecology
• /
• v.18 no.3
• /
• pp.333-340
• /
• 1995

This study aims to examine how the amount of sample and changes in combustible temperature of living branches and leaves treated with high temperature are associated with combustible time of two coniferous trees, Pinus rigida (R) and Larix leptolepis (L), which are the main victims of forest fire. During the first thirty minutes at $80^{\circ}C$, moisture content of R was higher than that of L by 12%, but after four hours, the moisture content was both lowered by 4~5% and turned to highly combustible leaves. With living leaves, the maximal combustible temperature, regardless of heating temperature, turned out to be higher than normal temperature by $67~140^{\circ}C$, and that with living branches, it was higher by $113~207^{\circ}C$. Also, with living leaves (R, L), the duration time of combustion was as follows: 605, 906 seconds at $400^{\circ}C$ and 76, 227 seconds at $600^{\circ}C$, respectively. Concerning the relation between the amount of burnt fuel and maximal temperature, the more the former was, the higher the latter. The total amounts of combustion heat of living branches and living leaves were 1, 121 Cal (20.8%) and 1, 137 Cal (21.4%), respectively. The total amount of combustion heat increased in proportion to the amount of consumed fuel: 100 g of living leaves and branches gave rise to 128 Cal, whereas 300 g did 556 Cal, that was more than three times.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.298-302
• /
• 2008

In this study, we have carried out the test to examine the ignition characteristics, such as a relation of moisture content and combustibility, and ignition temperature using KRS-RG-9000 tester, living leaves and dead leaves of significant 7 species of Young Dong Provinces of Korea after and before the rainfall. After 144 hours at normal temperature, the percentage of water content of the needle-shaped leaves was less than 10%. So it is suppose to be ignite easily. On the other hand, the self-temperature to ignite of broadleaf is higher. So the retard time at lower temperature is more long than needle-shaped leaf. Consequently, the fire-resistant qualities of broadleaf is higher than needle-shaped leaf.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.210-215
• /
• 2010

In this study, when the forest fire occurred, in order to estimate greenhouse gas emissions, tree glow in Gangwon Youndong area, Juglans mandshurica, Alnus japonica, Acer palmatum of carbon dioxide and carbon monoxide emissions were about. Water content were measured before the experiment, Juglans mandshurica 196.24%, Alnus japonica 169.17% Acer palmatum 210.10% moisture content showed a big difference, Living leaves of Acer palmatum were a lot of moisture. Also, 50g weight of carbon dioxide on the Juglans mandshurica 53.3644g, Alnus japonica 49.4256g, was released about Acer palmatum 51.3394g, Juglans mandshurica living leaves were the most carbon dioxide emissions. Carbon monoxide emissions result, About weight 50g Juglans mandshurica 1.5329g, Alnus japonica 1.7189g, 2.5002g about Acer palmatum was released, Acer palmatum living leaves were the most carbon monoxide emissions.

• The Korean Journal of Ecology
• /
• v.20 no.5
• /
• pp.367-373
• /
• 1997

The effects of salinity on the growth and production of rice were studied at Seosan reclaimed land from July to October, 1995. The plant height, the number of living aleaves, dead leaves and total leaves, the number of the grains and the dry weight of the grains per individual, and the dry weight of above the ground in $25cm{\times}25cm$ quadrat were investigated on 5 plots whers were different salinity. The plant height, the number of living leaves and total leaves and the number of grains and the dry weight of grains per individual, and the dry weight of above the ground decreased as the salinity of water increase and the number of dead leaves of rice increased as the salinity of water decrease. The effect of salinity on the reproductive production is severer than the vegetative production. Because of the salinity, the growth and the production of the rice at Seosan reclaimed land are worse than the normal rice field.

• Fire Science and Engineering
• /
• v.22 no.1
• /
• pp.84-92
• /
• 2008

Disclosed is a study related to the thermal characteristics of Pinus densiflora and Quercus dentate identifying the presence of any significant difference in the above trees, which are native to Young Dong Province of Korea, according to different regions of the trees such as branches, barks, living leaves and dead leaves. For this purpose, we have carried out a cone calorimeter test focusing on the variables such as mass loss, heat release, ignition time, flame holding time and concentrations of CO and $CO_2$. The results showed that the total mass loss was greatest in tree branches, whereas the ignition time of dead leaves was fastest both in Pinus densiflora and Quercus dantata. The flame holding times of dead leaves and barks were about $640{\sim}1,016s$ and the total heat release of dead leaves was around 60.1 $MJ/m^2$, twice the total heat release of living leaves. In addition, the maximum exhaust concentrations of CO and $CO_2$ in tree branches of Quercus dentata was 2.82 times higher than those of Pinus densiflora, respectively. From the foregoing, it was confirmed that there exist region-specific differential thermal characteristics in Pinus densiflora and Quercus dentata.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.3
• /
• pp.85-90
• /
• 2010

In this study, we have examined the monthly combustion characteristics of Quercus variabilis, a representing Quercus Spp. in Korea, using its living leaves over the period of from June to October. As a result, we were able to identify that their moisture content was about 114%~155%. The leaves of Quercus variabilis collected in October showed the lowest moisture content and nonflaming ignition temperature. The leaves of July showed the fastest flaming ignition time of 27s while those from September showed the longest persistence of flame with 105s, and also showed the highest total heat release amount. There was a noticeable difference in each month of the above period regarding total heat release amount and total smoke release amount with a gradual increase from June to October. The maximum smoke density was a bit higher in October leaves but there was no significant monthly difference. In addition, July leaves were shown to reach the maximum value in the shortest time of 795s.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.303-307
• /
• 2008

In this study, we have carried out the cone calorimeter test to examine the thermal characteristics, such as total smoke production(TSP), smoke temperature and oxygen consumption, of significant parts of above trees which are representative species of Young Dong Province of Korea. The smoke production of dead leaves and living leaves of pinus densiflora was increased rapidly at the early period of combustion. So the total smoke production of this parts was 8.3 times higher than other parts. The TSP of branches and barks of quercus dentata was 14.4 and 7.2 times higher than of pinus densiflora respectively. And also the maximum smoke temperature was about $338.35{\sim}353.25\;K$. The significant difference of oxygen consumption was not detected for dead leaves, branches and barks. However, the oxygen consumption of living leaves which have high percentage of moisture content is the lowest.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.308-312
• /
• 2008

In this study, we have carried out test to examine the ignition characteristics, such as a relation of moisture content and combustibility, and ignition temperature using KRS-RG-9000 tester, of significant part of above trees which are representative species of Young Dong Province of Korea. After rainfall, the percentage of moisture content of living leaves and branches was between 52 and 70%. But it was just between 17 and 33% after 144 hours drying at normal temperature. For dead leaves, it was 10% lower than of first. There was a significant difference on ignition characteristics. The hazard of ignition is highest on dead leaves. The ignition temperature of barks and branches is higher so a retard time is long than of living and dead leaves at normal temperature.

• Korean Journal of Rural Living Science
• /
• v.10 no.2
• /
• pp.28-36
• /
• 1999

The purpose of this study was to examine the best condition for dyeing silk in green color used kudzu-vine leaves which were available everywhere in our country except winter. Dyeing experiments were done under various dyeing conditions according to extracting method of dyebath from kudsu-vine leaves, pH of dyebath, dyeing time, concentration of dyebath and mordants which were treated after dyeing. Color difference ($\Delta$E) and Munsell's HV/C and color fastness to drycleaning, washing, perspiration and light were measured. The main results were as follows : 1. The color difference of dyed silk increased in dyebath B & C which were extracted in alkali water comparing with dyebath A which was extracted in distilled water. In dyebath B & C, the color difference was the highest in case of dyebath pH 5.0. 2. The colors of fabrics dyed in dyebath A were mainly yellow and the colors in dyebath B & C were yellow green. 3. The color differences of dyed silk increased according to dyeing time and concentration of dyebath. 4. The color were changed with the treatment of mordants. The most strong green color could get in Cu mordant treatment in dyebath C, pH 5.0, and concentration 4. 5. The peak of reflectance within the visible light of the fabric dyed in the most strong green color could be seen in $\lambda$500-520nm. 6. On the whole, the colorfastness of experimental fabrics dyed in dyebath B, C and Cu mordant treatment was good except the colorfastness to the light.