• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.28-37
• /
• 2022

The lignite and bituminous coal are mainly used in thermal power plant. They exhaust green house gas (GHG) such as CO₂, and become deplete, thus require alternative energy resources. To solve the problem, the hydrochar production from biomass is suggested. In this study, both hydrothermal carbonization (HTC) and solvothermal carbonization (STC) were used to produce high quality hydrochar. To improve the reactivity of water solvent process in HTC, STC process was conducted using ethanol solution. The experiments were carried out by varying the solid-liquid ratio (1:4, 1:8, 1:12), reaction temperature (150~300 ℃) and retention time (15~120 min) using kenaf. The characteristic of hydrochar was analyzed by EA, FT-IR, TGA and SEM. The carbon content of hydrochar increased up to 48.11%, while the volatile matter decreased up to 39.34%. Additionally, the fuel characteristic of hydrochar was enhanced by reaction temperature. The results showed that the kenaf converted to a fuel by HTC and STC process, which can be used as an alternative energy source of coal.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.77-92
• /
• 2021

The energy density of lithium-ion batteries (LIBs) determines the mileage of electric vehicles. For increasing the energy density of LIBs, it is necessary to develop high-capacity active materials that can store more lithium ions within constrained weight. The rapid progress made in cathode technology has realized the utilization of the near-theoretical capacity of cathode materials. In contrast, commercial LIBs have still exploited graphite as active material in anodes since the 1990s. The most promising way to increase anodes' capacity is to mix high-capacity and long-cycle-life silicon oxides (SiOx) with graphite. However, the low initial Coulombic efficiency (ICE) of SiOx limits its content below 15 wt%, impeding the capacity increase in anodes. To address this issue, various prelithiation techniques have been proposed, which can improve the ICE of high-capacity anode materials. In this review paper, we introduce the principles and expected effects of prelithiation techniques reported so far. According to the reaction mechanisms, the strategies are categorized. Mainly, we focus on the recent progress of solution-based chemical prelithiation methods with commercial viability, of which lithiation reaction occurs homogeneously at liquid-solid interfaces. We believe that developing a cost-effective and mass-scalable prelithiation process holds the key to dominating the anode market for next-generation LIBs.

• Journal of Korean Elementary Science Education
• /
• v.41 no.1
• /
• pp.150-161
• /
• 2022

Matter is a basic concept that students should understand during their science classes. However, many difficulties are associated with understanding the concepts of matter due to its abstraction. In this study, the elementary school students' understanding of the concept of matter and the examples of matter and non-matter are investigated and analyzed by grade. The subjects of this study were 418 students from third grade to sixth grade. The survey was conducted using a free-response questionnaire comprising three questions. The results are as follows. First, the elementary school students' conceptions of matter were "materials that make up objects," "what can be seen and touched," and "solid, liquid, and gas." As the grade increased, the explanations for a material decreased and the explanations for the state of matter increased. Furthermore, only few students explained matter in terms of mass and volume. Second, solids were the most common examples of matter presented by the students, and liquids and gases were included in the upper grades. However, there were many cases in the upper grades where students were unable to distinguish between objects and matter. Third, non-matter was properly presented by the 6th graders as compared to the other graders, and in many cases, objects, liquids, and gases were mentioned as non-matter. Fourth, it was found that the students' conceptions of matter influenced the examples of matter and non-matter that they presented.

• Korean Journal of Animal Reproduction
• /
• v.9 no.2
• /
• pp.133-139
• /
• 1985

An immunoassay may be defined as an analytical procedure involving the competitive reaction between a limiting concentration of specific antibody and two populations of antigen, one of which is labelled or immobillized. The advent of immunoassay has revolutionised our knowledge of reproductive physiology and the practice of veterinary and clinical medicine. Radioimmunoassay (RIA) was the first of these methods to be developed, which meausred the analyte with good sensitivity, accuracy and precision (1,2). The essential components of RIA are:-(i) a limited concentration of antibodies, (ii) a reference preparation, and (iii) an antigen labelled with a radioisotope (usually tritium or iodine-125). Most procedures invelove isolating the antibody-bound fraction and measuring the amount of labelled antigen. Good facilities are available for scintilltion counting, data reduction nd statistical analysis. RIA is undergoing refinement through:-(i) the introduction of new techniques to separate the antibody-bound and free fractions which minimize the misclassification of labelled antigen into these compartments, and the amount of non-specfic binding. (3), (ii) the development of non-extration for the measurement of haptens (4), (iii) the determination of a, pp.rent free (i.e. non-protein bound) analytes (5), and (iv) the use of monoclonal antibodies(6). In 1968, Miles and Hales introduced in important new type of immunoassay which they termed immunora-diometric assay (IRMA) based on t도 use of isotopically labelled specific antibodies(7) in a move from limited to excess reagent systems. The concept of two-site IRMAs (with a capture antibody on a solid-phase, and a second labelled antibody to a different antigenic determinant of the analyte) has enabled the development of more sensitive and less-time consuming methods for the measurement of protein hormones ovar wide concentration of analyte (8). The increasing use of isotopic methos for diverse a, pp.ications has exposed several problems. For example, the radioactive half-life and radiolysis of the labelled reagent limits assay sensitivity and imposes a time limit on the usefulness of a kit. In addition, the potential health hazards associated with the use and disposal of radioactive cmpounds and the solvents and photofluors necessary for liquid scientillation counting are incompatable with the development of extra-laboratory tests. To date, the most practical alternative labels to radioisotopes, for the measurement of analytes in a concentration > 1 ng/ml, are erythrocytes, polystyrene particiles, gold sols, dyes and enzymes or cofactors with a visual or colorimetric end-point(9). Increased sensitivity to<1 pg/ml may be obtained with fluorescent and chemiluminescent labels, or enzymes with a fluorometric, chemiluminometric or bioluminometric end-point. The sensitivity of any immunoassay or immunometric assay depends on the affinity of the antibody-antigen reaction, the specific activity of the label, the precision with which the reagents are manipulated and the nonspecific background signal (10). The sensitivity of a limited reagent system for the measurement of haptens or proteins is mainly dependent upon the affinity of the antibodies and the smalleest amount of reagent that may be manipulated. Consequently, it is difficult in practice to improve on the sensitivity obtained with iodine-125 as the label. Conversely, with excess reagent systems for the measurement of proteins it is theoretically possible to increase assay sensitivity at least 1000 fold with alternative luminescent labels. To date, a 10-fold improvement has been achieved, and attempts are being made to reduce the influence of other variables on the specific signal from the immunoreaction.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.33-41
• /
• 2023

Herein, we selectively recovered Zn and produced ZnSO₄ from electric arc furnace dust using a hydrometallurgical process. The analysis of the properties of the electric arc furnace dust revealed that the Fe content (9.9%) was relatively low while the Mn content (19%) was high as compared to the composition of general dust. Therefore, an appropriate hydrometallurgical process was designed based on the properties of the raw materials. In the leaching process involving the use of 1.6 M sulfuric acid and 20% solid-liquid ratio at 60℃ for 1 h, 85% of the Zn and Mn got dissolved while the Fe was not leached. To selectively recover Zn, a solvent extraction process using D2EHPA as the extractant was chosen, and 99% of the Zn was extracted using 0.8 M D2EHPA with 32% saponification and an O/A ratio of 2 using counter-current 3-stage extraction. Mn was entirely scrubbed with an aqueous sulfuric acid solution of pH 1.5. Finally, Zn was concentrated and stripped using 1.5 M sulfuric acid at an O/A ratio of 4 using counter-current 4-stage stripping. The stripping solution contained 40 g/L of Zn, and 99.9% of ZnSO₄∙H₂O was obtained by vacuum distillation.

• Analytical Science and Technology
• /
• v.21 no.6
• /
• pp.535-542
• /
• 2008

A liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI/MS/MS) method was developed for the determination and confirmation of clenbuterol in bovine muscle and milk. Clenbuterol and clenbuterol-D9 using as an internal standard in samples were extracted with ethyl acetate after hydrolysis and evaporated to dryness. The extracts were dissolved in 20% methanol and cleaned using HLB solid-phase extraction cartridge. The analytes were detected by LC-ESI/MS/MS on a $C_{18}$ column. Mass spectral acquisition was done in selected reaction monitoring (SRM) in positive ion mode to provide a high degree of sensitivity. Using MS/MS with SRM mode, the transitions (precursor to product) monitored were m/z 277${\rightarrow}$203 for clenbuterol, and m/z 286${\rightarrow}$204 for internal standard. The limits of quantitation (LOQ) and mean recoveries of clenbuterol in bovine muscle were $0.2{\mu}g/kg$ and 84.3~91.1%, respectively. The LOQ and mean recoveries in milk were $0.05{\mu}g/kg$ and 87.7~98.3%, respectively.

• Therapeutic Science for Rehabilitation
• /
• v.12 no.4
• /
• pp.135-151
• /
• 2023

Objective : This study was conducted to confirm the effect of the oral motor facilitation technique (OMFT) on oral motor function in stroke patients. Methods : This study was conducted on 72 stroke patients with dysphagia were included. Thirty-six patients were randomly assigned to the experimental and control groups were randomly classified into 36 patients each using a random table, and a two-group pre-post test was designed. The experimental group underwent OMFT, and the control group underwent traditional dysphagia therapy for 30 min, once a day, 5 times a week for 4 weeks, for a total of 20 sessions. The Comprehensive Orofacial Function Scale (COFFS) was used to evaluate oral motor function. Repeated-measures analysis of variance (ANOVA) was performed to confirm the effect of the period, and an independent t-test was performed to analyze the difference in change between the two groups. Results : Total COFFS scores improved in both groups. The experimental group showed significant changes in mandibular and lip movements, cheek blows, and tongue movements. In addition, there were significant differences depending on the intervention period in terms of masticatory distribution, food spillage, swallowing of solid and liquid foods, and voice changes. There were significant differences in the mandibular opening and closing categories between the two groups. Conclusion : OMFT is effective in improving oral motor function in stroke patients with dysphagia and can be used as basic evidence in clinical practice.

• Economic and Environmental Geology
• /
• v.56 no.5
• /
• pp.515-532
• /
• 2023

Bentonite, predominantly consists of expandable clay minerals, is considered to be the suitable buffering material in high-level radioactive waste disposal repository due to its large swelling property and low permeability. Additionally, the bentonite has large cation exchange capacity and specific surface area, and thus, it effectively retards the transport of leaked radionuclides to surrounding environments. This study aims to review the thermodynamic sorption models for four radionuclides (U, Am, Se, and Eu) and eight bentonites. Then, the thermodynamic sorption models and optimized sorption parameters were precisely analyzed by considering the experimental conditions in previous study. Here, the optimized sorption parameters showed that thermodynamic sorption models were related to experimental conditions such as types and concentrations of radionuclides, ionic strength, major competing cation, temperature, solid-to-liquid ratio, carbonate species, and mineralogical properties of bentonite. These results implied that the thermodynamic sorption models suggested by the optimization at specific experimental conditions had large uncertainty for application to various environmental conditions.

• Journal of The Korean Association For Science Education
• /
• v.27 no.4
• /
• pp.337-345
• /
• 2007

The purposes of this study are to investigate and compare the characteristics of classification criteria of secondary school students and science teachers in relation to the three statesof matter. For this research, 76 middle school students in the7th grade who studied microscopic viewpoints about classifying the state of matter for the first time, 69 high school students in the 12th grade who studied Chemistry I and IIcourses successfully, and 130 secondary school science teachers, through a questionnaire. As a result, while having learned the three states of matter in the microscopic viewpoints, the majority of middle school students showed a high percentage of classification in the macroscopic viewpoints. For high school students, their percentage of classification included highmicroscopic viewpoints about solid and gas, the percentage of classification included macroscopic viewpoints about liquid state as alsohigh. The secondary school teachers gave answers in the macroscopic viewpoints and microscopic viewpoints equally, but their answers were just representation of the viewpoints list without the meaningful connection of the two type of viewpoints. To solve these problems, It is necessary to form connective change from the macroscopic viewpoints to the microscopic viewpoints about the criteria for classifying the States of Matter and various educational efforts.

• Journal of Life Science
• /
• v.34 no.6
• /
• pp.393-398
• /
• 2024

The purpose of this study was to verify the antifungal properties of various herbal medicines belonging to the Ranunculaceae family and to find an extraction method effective in inhibiting fungal growth. When antifungal activity was measured in a liquid medium with extracts obtained by either hot water extraction or organic solvent extraction of the herbal medicines Clematis apiifolia, Coptis chinensis, and Pusatilla chinensis, effective results were obtained from the chloroform extract. In addition, fungal growth inhibition experiments were performed on unicellular fungi, Candida albicans, Candida tropicalis, and Candida lusitaniae, and on filamentous fungi, such as Pythium ultimum, Aspergillus fumigatus, and Fusarium oxysporum, using disk diffusion experiments on solid media. It was confirmed that P. chinensis extract has excellent antifungal properties against Candida spp. and C. apiifolia extract against filamentous mold. Finally, GC-MS analysis was performed to explore the useful antifungal substances present in the extract. As a result of the study, thurbergenone from C. apiifolia and 16-hydroxycleroda-3, 13(14)-dien-15, 16-olide (16-HCDO) from C. chinensis were confirmed as antifungal candidates. In conclusion, it was confirmed that C. apiifolia, C. chinensis, and P. chinensis have antifungal activity against various fungi, and in GC-MS analysis, all herbal medicines were confirmed to have different antifungal candidates. These results indicate that the Ranunculaceae family has evolved in several directions for fungal resistance traits.