• 방사성폐기물학회지
• /
• 제18권4호
• /
• pp.439-455
• /
• 2020

Numerical model was developed that simulates radionuclide (3H and 14C) transport modeling at the 2nd phase facility at the Wolsong LILW Disposal Center. Four scenarios were simulated with different assumptions about the integrity of the components of the barrier system. For the design case, the multi-barrier system was shown to be effective in diverting infiltration water around the vaults containing radioactive waste. Nevertheless, the volatile radionuclide 14C migrates outside the containment system and through the unsaturated zone, driven by gas diffusion. 3H is largely contained within the vaults where it decays, with small amounts being flushed out in the liquid state. Various scenarios were examined in which the integrity of the cover barrier system or that of the concrete were compromised. In the absence of any engineered barriers, 3H is washed out to the water table within the first 20 years. The release of 14C by gas diffusion is suppressed if percolation fluxes through the facility are high after a cover failure. However, the high fluxes lead to advective transport of 14C dissolved in the liquid state. The concrete container is an effective barrier, with approximately the same effectiveness as the cover.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4441-4448
• /
• 2022

The electrochemical oxidation process has been widely studied in the field of wastewater treatment for the decomposition of organic materials through oxidation using ·OH generated on the anode. Pt anode electrodes with high durability and long-term operability have a low oxygen evolution potential, making them unsuitable for electrochemical oxidation processes. Therefore, to apply Pt electrodes that are suitable for long-term operation and large-scale processes, it is necessary to develop a new method for improving the decomposition rate of organic materials. This study introduces a method to improve the decomposition rate of organic materials when using a Pt anode electrode in the electrochemical oxidation process for the treatment of organic decontamination liquid waste. Electrochemical decomposition tests were performed using sodium dodecylbenzenesulfonate (SDBS) as a representative organic material and a Pt mesh as the anode electrode. Y₂O₃ particles were introduced into the electrolytic cell to improve the decomposition rate. The decomposition rate significantly improved from 21% to 99%, and the current efficiency also improved. These results can be applied to the electrochemical oxidation process without additional system modification to enhance the decomposition rate and current efficiency.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 추계학술논문요약집
• /
• pp.339-340
• /
• 2017

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.135-140
• /
• 2003

1996년부터 2002년까지 하나로의 출력 운전 중 발생한 액체 폐기물의 양을 조사, 정리하고 원자로 출력량과의 상관 관계를 비교하였다. 이 기간동안 발생한 폐기물량 및 처리비용은 각각 $263,530{\ell}$, 8,169만원이었으며 출력량 대비 폐기물 발생량 및 처리비용은 각각 $11.38{\ell}/MWD$, 157원/MWD이다. 폐기물 저감 대책은 원자로 홀 내에서 수행되는 보수 작업 및 실험 공정을 개선하여 저감하였다.

• Journal of Radiation Protection and Research
• /
• 제48권1호
• /
• pp.44-51
• /
• 2023

Background: Aptamers are currently being used in various fields including medical treatments due to their characteristics of selectively binding to specific molecules. Due to their special characteristics, the aptamers are expected to be used to remove radionuclides from a large amount of liquid radioactive waste generated during the decommissioning of nuclear power plants. The radiological effects on the aptamers should be evaluated to ensure their integrity for the application of a radionuclide removal technique. Materials and Methods: In this study, Monte Carlo N-Particle transport code version 6 (MCNP6) and Monte Carlo damage simulation (MCDS) codes were employed to evaluate the radiological effects on the aptamers. MCNP6 was used to evaluate the secondary electron spectrum and the absorbed dose in a medium. MCDS was used to calculate the DNA damage by using the secondary electron spectrum and the absorbed dose. Binding experiments were conducted to indirectly verify the results derived by MCNP6 and MCDS calculations. Results and Discussion: Damage yields of about 5.00×10^-4 were calculated for 100 bp aptamer due to the radiation dose of 1 Gy. In experiments with radioactive materials, the results that the removal rate of the radioactive ⁶⁰Co by the aptamer is the same with the non-radioactive ⁵⁹Co prove the accuracy of the previous DNA damage calculation. Conclusion: The evaluation results suggest that only very small fraction of significant number of the aptamers will be damaged by the radioactive materials in the liquid radioactive waste.

• 자원환경지질
• /
• 제51권2호
• /
• pp.177-183
• /
• 2018

본 연구는 원자력 발전시설에서 발생하는 방사성 액체폐기물 내 코발트의 제거를 위해 전기응집공법의 적용 가능성을 확인하였다. 전기응집공법은 전기화학반응을 이용하여 폐액 내 오염물질을 제거하는 방법으로 기존의 화학처리와 막공정의 단점을 보완하는 새로운 기술이다. 원자력 발전시설에서는 냉각 배관의 세척과정에서 코발트를 포함한 방사성 액체폐기물이 발생한다. 용액 내 코발트의 농도를 1 mg/L와 10 mg/L로 조성하여 전기응집공법을 적용한 결과 약 10분 이내에 코발트가 완전히 제거되었다. 또한 500 mL의 코발트 용액을 처리하는 과정에서 0.2 g의 슬러지가 발생하여 폐기물의 부피감용에 매우 효과적인 것으로 나타났다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.220-225
• /
• 2003

원자력발전소에서 발생하는 방사성 폐액은 일반적으로 액체폐기물처리계통 폐액증발기 및 농축 폐액건조설비에서 증발 및 건조 공정을 통해 수분을 함유하지 않은 분말형태로 변한다. 이 분말형태의 폐기물은, 취급 시와 처분 후 안전성을 확보할 수 있도록, 파라핀과 균일하게 혼합되어 고화된 후 철제드럼에 포장된다. 농축폐액건조설비를 이용하여 농축폐액을 건조시킨 후 분말 형태의 폐기물을 파라핀과 혼합하는 공정을 수행할 때, 방사성 폐액 중 붕소와 나트륨의 몰비가 0.2를 초과하는 경우, 분말형태의 폐기물이 파라핀과 균일하게 혼합되지 않고 층을 이루어 분리되어 드럼에 안정고화가 잘 안되는 경우가 발생하였고 또한 일부는 드럼화 전에 설비 내에 고착되는 현상이 발생하는 것을 경험하였다.

• 방사성폐기물학회지
• /
• 제19권1호
• /
• pp.9-27
• /
• 2021

As an example of research activities in decontamination for decommissioning, new data are presented on the options for corrosion layer dissolution during the decommissioning decontamination, or persulfate regeneration for decontamination solutions re-use. For the management of spent decontamination solutions, new method based on solvent extraction of radionuclides into ionic liquid followed by electrodeposition of the radionuclides has been developed. Fields of applications of composite inorganic-organic absorbers or solid extractants with polyacrylonitrile (PAN) binding matrix for the treatment of liquid radioactive waste are reviewed; a method for americium separation from the boric acid containing NPP evaporator concentrates based on the TODGA-PAN material is discussed in more detail. Performance of a model of radionuclide transport, developed and implemented within the GoldSim programming environment, for the safety studies of the LLW/ILW repository is demonstrated on the specific case of the Richard repository (Czech Republic). Continuation and even broadening of these activities are expected in connection with the approaching end of the lifespan of the first blocks of the Czech NPPs.

• Membrane and Water Treatment
• /
• 제3권4호
• /
• pp.231-242
• /
• 2012

The performance of a nanofiltration membrane for treatment of a low-level radioactive liquid waste was investigated through static and dynamic tests. The liquid waste ("carbonated water") was obtained during conversion of $UF_6$ to $UO_2$. In the static tests membrane samples were immersed in the waste for 24, 48 or 72 h. The transport properties of the samples (hydraulic permeability, permeate flow, selectivity) were evaluated before and after immersion in the waste. In the dynamic tests the waste was permeated in a permeation flow front system under 0.5 MPa, to determine the selectivity of NF membranes to uranium. The surface layer of the membrane was characterized by zeta potential, field emission microscopy, atomic force spectroscopy and infrared spectroscopy. The static test showed that the pore size distribution of the selective layer was altered, but the membrane surface charge was not significantly changed. 99% of uranium was rejected after the dynamic tests.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.237-238
• /
• 2019