• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.2
• /
• pp.199-207
• /
• 2015

Solid materials of ammonia sources with SCR have been considered for the application of lean NOx reduction in automobile industry, to overcome complex problems of liquid urea based SCR. These solid materials produce ammonia gas directly with proper heating and can be packaged by compact size, because of high volumetric ammonia density. Among ammonium salts and metal ammine chlorides, calcium ammine chloride was focused on this paper due to low decomposition temperature. In order to make calcium ammine chloride in lab-scale, simple reactor and glove box was designed and built with ammonium gas tank, regulator, and sensors. Basic test conditions of charging ammonia gas to anhydrous calcium chloride are chosen from equilibrium vapor pressure by Van't Hoff plot based on thermodynamic properties of materials. Synthetic method of calcium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%) from simple weight calculations which were confirmed by IC. Also, lab-made calcium ammine chloride were analyzed by TGA and DSC to clarify decomposition step in the equations of chemical reaction. To understand material characteristics for lab-made calcium ammine chloride, DA, XRD and FT-IR analysis were performed with published data of literature. From analytical results, water content in lab-made calcium ammine chloride can be discovered and new test procedures of water removal were proposed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.429-434
• /
• 2011

Bulk cargo loaded into ship can be damaged by various kinds reasons. This paper aims to analyze about cargo damage of coil carrier ship due to condensation. Condensation is the formation of liquid drops of water from water vapor. Condensation consists of small drops of water which form when warm water vapour or steam touches a cold surface such as a window. In general, condensation have occurred by temperature difference at large building and ship's tank. It is phenomenon that can occur often to oceangoing vessel moving temperature difference places in similar time. This paper proposes a new method using dehumidification device and fan heater to prevent bulk cargo damage of coil carrier ship from condensation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.6
• /
• pp.70-77
• /
• 2011

A ventilation-relief valve performs as a safety-valve assembly for the liquid-propellant feeding system of space launch vehicle. This valve plays a role of relieving the vaporized propellants from propellant tanks during the filling and storing stages of propellants. Also it regulates to maintain the pressure of ullage volume of on-board propellant tanks within the safety-margin during the flight. The simulation model of ventilation-relief valve is designed with AMESim to predict and evaluate the dynamic characteristics and pneumatic behaviors of valve. To validate a valve simulation model, the simulation results of the opening and closing pressures and their operating durations of valve by AMESim analysis are compared with the results of mathematical methods. In addition, the results of internal flow simulation with FLUENT are utilized to improve the accuracy of valve-modeling. This study will serve as one of reference guides to enhance the developmental efficiency of ventilation-relief valves with the various operating conditionss, which shall be used in Korea Space Launch Vehicle-II.

• 보존과학연구
• /
• s.6
• /
• pp.96-110
• /
• 1985

This report is briefly thied to introduce the kinds of clothes for the body of deceased and special features of remains in the era of the middle of Yidynasty found in Changheung IM's tomb, and some remarks related to the conservation treatment for shrouds as well. The contents of this report are summed up as follows:1. Included with the clothes of dead body of IM's clan were 2 pcs. Of woman's jacket, 2 pcs. of underpants, 1pcs. of single layered overcoat twithout cotton, 1pcs.of women's overcoat with a single layered thin cotton inside, women's socks, cushoned mattress, straw shoes and other hemp fabrics etc. By the observation of these remains, it is considered that they dressed the deceased with new cloth taken from the unsuals not prepared specially and stored beforehand for such as occasion as does it nowadays.2. As to the conservation treatment, the materials were comparatively good and so they employed general tank washing method with special neutrality liquid soap(made by Lab, of Household Products, Pacific R & D Center) for cleaning imbrued matrials on the clothes. After cleaning and drying naturally at a shade place, remains put into apaulowania tree box were fumigated by mixed gas (M. B. + E. O.) for prevention of damages from fungi and insects.3. Desirable environment control for scientific conservation of such kinds of cellulose textiles is to be illuminated at below 50Lux, temperature 16-18℃, relative humidity 45-60%($\pm$4%) and removed the dust. For the prevention of the damaging fungi and insects, it is desirable to fumigate by mixed gas (M.B.+E.O.) once a year.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.109-116
• /
• 2012

A vent-relief valve performs as a safety-valve assembly for liquid propellant feeding system of space launch vehicle, which relives pressurant propellant tanks during the filling and the flight. At vent mode, valve is opened and closed by driving pneumatic pressure, and at relief mode, valve is automatically operated to set relief pressure. In this study, we have analyzed a basic layout of vent-relief valve which is designed using foreign LVs(Saturn) to satisfy requirements of Korean Space Launch Vehicle. The simulation model of vent-relief valve is designed by using the AMESim code to verify design parameters and evaluate pneumatic behaviors of valve. In this study, we performed dynamic characteristic simulations on design parameters. And we could predict opening/closing time and pressures, operating performances on design parameters. Using this results, we could suggest detail design and boundary conditions of design.

• Journal of Mushroom
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2014

Mycelial viability and cultivation characteristics of strains of Hypsizygus marmoreus after long-term storage were investigated. The experimental conditions were the storage at $4^{\circ}C$ using a slant culture technique with or without mineral oil, and in liquid nitrogen tank in the presence of 10% glycerol or 10% glycerol with 5% trehalose. The myceila of four strains of H. marmoreus were thawed at 9, 21, 33, and 45 months after beginning of the storage, and then the growth of the mycelia was measured on a PDA plate with serial transfers to new plate for the recovery. The mycelial growth data after 45 months showed that the mycelia were mostly viable but not fully active particularly when they were stored in liquid nitrogen with 10% glycerol. The growth activity could be fully recovered after second transfer to new PDA plate. Cultivation of mushroom fruiting body using the recovered mycelia also demonstrated that the storage methods employed in this work were applicable for the long-term storage of H. marmoreus.

• Journal of Periodontal and Implant Science
• /
• v.25 no.2
• /
• pp.210-221
• /
• 1995

The purpose of this study was performed to investigate the mineralization and differentiation of osteobalsts for bone regeneration in vitro and the effect of rate of the composition in periodontal cells on mineralization. For this study, healthy gingival tissues were surgically obtained from the patients during 1st premolar extraction for the purposes of orthodontic treament. Gingival tissue was washed several time with Phosphate buffered saline contained high concentration of antibiotics and antifungal agent, and cultured in Dulbecco's Modified Eagle's Medium(DMEM, Gibco, U.S.A.). Every cell were cultured in state at $37^{\circ}C$, 100% of humidity, 5% of $CO_2$ incubator. Bone marrow stromal cells were isolated from 5-clay-old rat femur with using medium irrigation mathod by syringe. Cell suspension medium were centrifuged at 1500 rpm for 5 min and then cultured in the petri dish. Two kinds of cell were freezed and stocked in the liquid nitrogen tank until experiment. Cell were incubated into the 24 multi-well plate with $5{\times}10^4$cell/well of medium at $37^{\circ}C$, 100% of humidity 5% $CO_2$ incubator for 24 hours. After discarded of the supernatent of medium, O.5ml of medium were reapplied and incubated. And counted the number of cell using the hemocytometer and inverted light microscope. We have measured the number of mineralized nodule with using Alizarin red S. staining in microscope. Furthermore every cell were observed the morphological change between every rate of co-culture of the two kinds of cell. The results were as follows; The rate of proliferation of co-culture cell revealed high rate tendency compared the bone marrow stromal cell only and low growth rate to compared with gingival fibroblast only. The tendency of formation of the mineralized nodule were observed dose-depend pattern of bone marrow stromal cell. It is concluded that the gingival fibroblast may inhibit the formation of mineralized nodule in the culture of the bone marrow stromal cell.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.4
• /
• pp.125-132
• /
• 2012

Urea-SCR system, which converts nitrogen oxides to nitrogen and water in the presence of a reducing agent, usually AdBlue urea solution, is known as one of the powerful NOx reduction systems for mobile as well as stationary applications. For its consistent and reliable operation in mobile applications, such various problems as transient injection, ammonia slip, and freezing in cold weather have to be resolved. In this work, therefore, numerical study on three-dimensional unsteady heating problems were analyzed to understand the melting and heat transfer characteristics such as urea liquid volume fraction, temperature profiles and generated natural convection behavior in urea solution by using the commercial software Fluent 6.3. After validating by comparing numerical and experimental data with pure gallium melting phenomena, numerical experiment for urea melting is conducted with three different coolant heating models named CH1, 2, and 3, respectively. Finally, it can be found that the CH3 model, in which more coolant is concentrated on the lower part of the urea tank, has relatively better melting capability than others in terms of urea quantity of $1{\ell}$ for start-up schedule.

• Journal of Korean Society of Forest Science
• /
• v.67 no.1
• /
• pp.31-41
• /
• 1984

This study was examined for purposes of identifing woods of the hull construction collected from a sunken old-ship by the anatomical wood features, and then from the result the geographical distribution ranges of the species were described. Most woods of the hull construction, i.e. shell plating, bulkhead, floor, bulwark, deck and kneel were identified with Chinese red pine (Pinus massoniana), but the fenders were idendified with Chinese fir (Cunninghamia lanceolata). These two species are known to be the endemic species in the south region of Yangtze River. As the other materials, bulwark stays and liquid tank stays were respectively identified with Cinnamomum spp., Distylium spp., and the geographical distributions of these species are the south China, the south coast of Korea and the Japanese Islands.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.275-284
• /
• 1992

A generated problem in treated highly concentrated organic wastewater by activated sludge process is the limitation of biomass concentration and oxygen transfer capability in aeration tank. To overcome the limitation, the deep shaft activated sludge process which has high oxygen transfer capability was applied to the wastewater treatment process. This paper investigated the characteristics of liquid circulation, oxygen transfer and biological treatment of paper mill wastewater by the deep shaft activated sludge process. From the obtained results, it was found that the oxygen transfer capability in the deep shaft system was much greater than those in the conventional aeration systems and almost tantamount to the pure oxygen system. The deep shaft system could treat highly concentrated organic wastewater by higher biomass concentration and organic loading rate.