• 한국수소및신에너지학회논문집
• /
• 제34권1호
• /
• pp.59-68
• /
• 2023

In this study, the performance of high-pressure fuel pumps was compared to find a high-pressure pump suitable for dimethyl ether (DME) fuel, and to establish a database of basic data on flow rates. The use of DME in compression ignition engines can reduce pollutant emissions. The cetane value of DME is higher than that of diesel fuel. The physical properties of DME are similar to liquefied gasoline gas (LPG), and when pressurized at a pressure of 6 bar or more, it changes from gas to liquid. Two types of high pressure pumps used in this study were independent injection type pump and a wobble plate type pump. Two high-pressure pumps with different injection types were compared. By measuring and comparing the performance changes of the two high-pressure pumps, a pump suitable for DME was selected and performance improvement measures were proposed. The changed experimental conditions to measure the performance change of the high pressure pump were increased in the units of 100 to 1,000 rpm and 100 rpm, and the experiment was performed at common rail pressures 300 and 400 bar. it was confirmed that the DME inside the fuel supply system remained in a liquid state through temperature sensors, pressure sensors, and pressure gauges. As a result of the experiment, it was confirmed that the flow rate discharged from the high-pressure fuel pump increased as the motor rotational speed increased, and the flow rate of the high-pressure fuel pump

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.615-622
• /
• 2023

In this study, the theoretical analysis focused on the quantity of liquid hydrogen required for cooling down to 20 K, as well as the generation of boil-off gas (BOG) from the cooling process of the cryogenic components. The study involved calculating the amount of liquid hydrogen needed to achieve the desired temperature for the cryogenic components and subsequently determining the resulting BOG production at various reference temperatures. It was shown that it was important to efficiently lower the temperature of cryogenic parts through preliminary cooling. As a result, the reference temperature and pressure had an influence on the BOG generation on the cooling of cryogenic components using liquid hydrogen.

• 항공우주시스템공학회지
• /
• 제9권2호
• /
• pp.13-18
• /
• 2015

Micro planar type liquid propellant thruster was fabricated by MEMS manufacturing process for micro/nano satellites applications. 90 wt.% hydrogen peroxide was used as propellant and for propellant decomposition, Pt/Al2O3 was used as catalyst. Micro thruster structure was made by 5 photosensitive glasses patterned with thruster component profiles. Objective thrust was 50 mN and required hydrogen peroxide mass flow was 2.1 ml/min, which was supplied by syringe pump and teflon tube in experimental test. Performance test said that average steady thrust was approximately 30 mN, around 60% of objective thrust, and transient time was about 5 sec. It is estimated that extended response time was due to high thermal energy loss of micro scale thruster and low enthalpy input by propellant mass flow.

• 한국추진공학회지
• /
• 제13권3호
• /
• pp.20-26
• /
• 2009

30톤급 액체로켓엔진용 터보펌프에 대하여 실매질을 사용하여 성능시험이 이루어졌다. 산화제펌프와 연료펌프에는 각각 액체산소, 케로신의 실매질을 사용하고 터빈에는 고압의 상온 수소가스가 사용되었다. 터보펌프는 설계점과 탈설계점의 전 영역에서 안정적으로 작동하였고 요구되는 성능 조건을 만족 시켰으며 이로써 엔진 서브시스템 수준의 터보펌프 개발이 성능 측면에서 검증되었다고 볼 수 있다. 본 논문에서는 단일 운전으로 세 운용점에서 총 75초간 작동된 경우의 시험결과를 소개하였다. 펌프와 터빈의 성능 특성 관점에서 터보펌프 조립체의 실매질 성능시험 결과와 터보펌프 구성품의 상사 성능시험 결과가 양호하게 일치하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.359-365
• /
• 2008

30톤급 액체로켓엔진용 터보펌프에 대하여 실매질을 사용하여 성능시험이 이루어졌다. 산화제펌프와 연료펌프에는 각각 액체산소, 케로신의 실매질을 사용하고 터빈에는 고압의 상온 수소가스가 사용되었다. 터보펌프는 설계점과 탈설계점의 전 영역에서 안정적으로 작동하였고 요구되는 성능 조건을 만족시켰으며 이로써 엔진 서브시스템 수준의 터보펌프 개발이 성능 측면에서 검증되었다고 볼 수 있다. 본 논문에서는 단일 운전으로 세 운용점에서 총 75초간 작동된 경우의 시험결과를 소개하였다. 펌프와 터빈의 성능 특성 관점에서 터보펌프 조립체의 실매질 성능시험 결과와 터보펌프 구성품의 상사 성능 시험 결과가 양호하게 일치하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.62-67
• /
• 2022

Liquid hydrogen (LH₂) has a higher density than gaseous hydrogen, so it has high transport efficiency and can be stored at relatively low pressure. In order to use efficient bulk hydrogen in the industry, research for the LH₂ supply system is needed. In the high-pressure hydrogen station based on LH₂ currently being developed in Korea, a heat exchanger is used to heat up supercritical hydrogen at 700 bar and 60 K, which is pressurized by a cryogenic high-pressure pump, to gas hydrogen at 700 bar and 300 K. Accordingly, the heat exchanger used in the hydrogen station should consider the design of high-pressure tubes, miniaturization, and freezing prevention. A helical heat exchanger generates secondary flow due to the curvature characteristics of a curved tube and can be miniaturized compared to a straight one on the same heat transfer length. This paper evaluates the heat transfer performance through parametric study on the distance between coils, guide effect, and anti-icing design of helical heat exchanger. The helical heat exchanger has better heat transfer performance than the straight tube exchanger due to the influence of the secondary flow. When the distance between the coils is uniform, the heat transfer is enhanced. The guide between coils increases the heat transfer performance by increasing the heat transfer length of the shell side fluid. The freezing is observed around the inlet of distribution tube wall, and to solve this problem, an anti-icing structure and a modified operating condition are suggested.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.13-16
• /
• 2007

본 연구에서는 무인기용 추진 시스템으로 연료전지를 사용하였다. 연료전지 추진 시스템은 고항속 무인기를 위한 고에너지 밀도를 갖는 이상적인 대체 동력원이다. 연료전지 동력 시스템은 기폰 배터리의 5배 이상의 에너지 밀도를 제공한다. 액체상태로 저장되는 수소화붕소나트륨을 수소원으로 사용하였다. 수소 생성 시스템은 촉매 반응기, 펌프, 연료, 카트리지, 분리기로 구성된다. 연료전지와 리륨-폴리머 배터리의 하이브리드 동력 관리 시스템이 개발되었다. 모터, 펌프, 팬은 연료전지 시스댐의 피트백 신호에 따라 배터리 동력으로 작동되고 배터리는 연료전지의 잉여 동력으로 재충전되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.87-90
• /
• 2007

장기 체공 무인 항공기를 위한 연료 전지 동력 시스템을 개발하였다. 기존의 고압 수소 저장 방식의 문제점을 해결하기 위해 높은 에너지 밀도를 갖는 액상의 화학 수소화물을 연료로 사용하였다. 수소화물을 전환하여 수소를 발생하는 연료 공급 장치는 촉매 반응기, 펌프, 연료 카트리지, 분리기, 제어기로 구성되어 있으며, 전력을 발생하기 위한 연료전지 스택과 함께 연료 전지 동력 시스템을 무인 항공기에 탑재하였다. 연료 전지 동력 시스템을 무인 항공기에 적용하기 위한 성능 검증을 수행하였다.

• 한국인터넷방송통신학회논문지
• /
• 제20권3호
• /
• pp.135-140
• /
• 2020

반도체 공정에서 필수적인 공정가스가 유해가스이기 때문에 이를 친환경적으로 해결하는 것이 필수과제이다. 현재 반도체 공정에서 사용되는 세정기술은 대부분이 1970년대 개발된 과산화수소를 근간으로 하는 습식 세정으로, 표면의 입자를 제거하기 위한 SC-1 세정액은 암모니아와 과산화수소 혼합액을 사용하고 있다. 따라서 환경적 문제를 유발하며, 또한 과도한 용수 사용으로 인한 경제적 문제도 심각하다. 이러한 이유로 본 연구를 통한 개발 제품은 챔버 출구에서 나오는 공정 유해가스를 진공펌프에 입력되기 전 가스를 분해하여 해가 없는 가스로 만들거나 소각과 동시에 펌프에 가스의 성분이 증착되어 반도체 공정의 환경적 문제를 해결하고자 한다. 본 논문에서는 반도제 공정에서 필수 불가결하게 사용되는 유해가스(N2, CF4, SF6⋯. 등)를 사람에게 무해한 가스로 치환하거나 플라스마로 소각하여 환경을 살리고 생산성 향상이 되도록 제안된 CPS (Confined Plasma Source)를 연구하고자 한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.216-227
• /
• 2004

A new cavitating model by using bubble size distribution based on bubbles-mass has been proposed. Both liquid and vapor phases are treated with Eulerian framework as a mixture containing minute cavitating bubbles. In addition vapor phase consists of various sizes of vapor bubbles, which are distributed to classes based on their mass. The bubble number-density for each class was solved by considering the change of the bubble-mass due to phase change as well as generation of new bubbles due to heterogeneous nucleation. In this method, the bubble-mass is treated as an independent variable, and the other dependent variables are solved in spatial coordinates and bubble-mass coordinate. Firstly, we employed this method to calculate bubble nucleation and growth in stationary super-heated liquid nitrogen, and bubble collapse in stationary sub-cooled one. In the case of bubble growth in super-heated liquid, bubble number-density of the smallest class based on its mass is increased due to the nucleation. These new bubbles grow with time, and the bubbles shift to larger class. Therefore void fraction of each class is increased due to the growth in the whole class. On the other hand, in the case of bubble collapse in sub-cooled liquid, the existing bubbles are contracted, and then they shift to smaller class. It finally becomes extinct at the smallest one. Secondly, the present method is applied to a cavitating flow around NACA00l5 foil. Liquid nitrogen and liquid oxygen are employed as working fluids. Cavitation number, $\sigma$, is fixed at 0.15, inlet velocities are changed at 5, 10, 20 and 50m/s. Inlet temperatures are 90K in case of liquid nitrogen, and 90K and 1l0K in case of liquid oxygen. 110K of oxygen is corresponding to the 90K of nitrogen because of the same relative temperature to the critical one, $T_{r}$=$T/T_c^{+}$. Cavitating flow around the NACA0015 foils was properly analyzed by using bubble size distribution. Finally, the method is applied to a cavitating flow in an inducer of the LE-7A hydrogen turbo-pump. This inducer has 3 spiral foils. However, for simplicity, 2D calculation was carried out in an unrolled channel at 0.9R cross-section. The channel moves against the fluid at a peripheral velocity corresponding to the inducer revolutions. Total inlet pressure, $Pt_{in}$, is set at l00KPa, because cavitation is not generated at a design point, $Pt_{in}$=260KPa. The bubbles occur upstream of the foils and collapse between them. Cavitating flow in the inducer was successfully predicted by using the bubble size distribution.