• Analytical Science and Technology
• /
• v.37 no.1
• /
• pp.47-62
• /
• 2024

Abu Gurdi area is located in the South-eastern Desert of Egypt which considered as volcanic massive sulfide deposits (VMS). The present work aims at investigating the ore mineralogy of Abu Gurdi region in addition to the effectiveness of the hydrometallurgical route for processing these ores using alkaline leaching for the extraction of Zn, Cu, and Pb in the presence of hydrogen peroxide, has been investigated. The factors affecting the efficiency of the alkaline leaching of the used ore including the reagent composition, reagent concentration, leaching temperature, leaching time, and Solid /Liquid ratio, have been investigated. It was noted that the sulfide mineralization consists mainly of chalcopyrite, sphalerite, pyrite, galena and bornite. Gold is detected as rare, disseminated crystals within the gangue minerals. Under supergene conditions, secondary copper minerals (covellite, malachite, chrysocolla and atacamite) were formed. The maximum dissolution efficiencies of Cu, Zn, and Pb at the optimum leaching conditions i.e., 250 g/L NaCO₃ - NaHCO₃ alkali concentration, for 3 hr., at 250 ℃, and 1/5 Solid/liquid (S/L) ratio, were 99.48 %, 96.70 % and 99.11 %, respectively. An apparent activation energy for Zn, Cu and Pb dissolution were 21.599, 21.779 and 23.761 kJ.mol^-1, respectively, which were between those of a typical diffusion-controlled process and a chemical reaction-controlled process. Hence, the diffusion of the solid product layer contributed more than the chemical reaction to control the rate of the leaching process. High pure Cu(OH)₂, Pb(OH)₂, and ZnCl₂ were obtained from the finally obtained leach liquor at the optimum leaching conditions by precipitation at different pH. Finally, highly pure Au metal was separated from the mineralized massive sulfide via using adsorption method.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.4
• /
• pp.307-315
• /
• 2009

This study was conducted to investigate optimal conditions for preparation of extracts from salmon frame using an autoclave. According to the results of various extraction conditions (extraction method, extraction time, volume and pH of extraction solution, and necessity of re-extracting), higher quality extracts could be prepared by adding salmon frame into 3 times (vol/wt) of water to raw material, and then autoclaving for 4 hrs before filtering extracts with cheese cloth. For efficient use as basic materials of liquid or powder Gomtang, however, fish odor of the extracts prepared under optimal condition should be improved.

• The Korea Journal of Herbology
• /
• v.25 no.1
• /
• pp.9-12
• /
• 2010

Objectives : To evaluate the extraction efficiency of water decoction with or without non-woven fabric underlying comparison of the HPLC (high-performance liquid chromatography) profiles of the hesperidin which is the standard of Citri Pericarpium. Methods : Pyungwisan, which is comprised of Atractylodis Rhizoma, Magnoliae Cortex, Citri Pericarpium, Glycyrrhizae Radix, Zingiberis Rhizoma, and Ziziphy Fructus, was extracted in boiling water with non-woven fabric or without non-woven fabric. Then hesperidin content was analyzed by HPLC. Results : The contents of hesperidin in the water extract of Pyungwisan which was decocted without non-woven fabric showed $219.57{\pm}2.51\;mg/g$ and $138.90{\pm}6.32\;mg/g$ in with non-woven fabric decoction. Conclusions : These results suggest that herbal decoction without non-woven fabric might increase extraction efficiency.

• Archives of Pharmacal Research
• /
• v.27 no.5
• /
• pp.539-543
• /
• 2004

An efficient analytical method was devised for the accurate L-muscone assay in aqueous samples. It involves solid-phase extraction of L-muscone in adsorption mode using XAD-4 as the sorbent and dichloromethane modified with 10% (v/v) methanol as the eluting solvent. The gas chromatographic analysis of the eluate residue dissolved in toluene on a DB-5MS capillary column provided complete resolution of L-muscone from the co-extracted interferences. The overall method showed excellent linearity ($r^2{\geq}$ 0.9994) in the range of 0.1 to 2.0 $\mu\textrm{g}$/mL with good intra- and inter-day precisions (% RSD = 2.5～7.3) and with high extraction recovery rates ($\geq$ 98.1 %). When the present method was applied to a L-muscone herbal drink product, the within-batch RE (%) in the labeled concentration (1.5 $\mu\textrm{g}$/mL) for the three randomly chosen bottles were -2.4, -1.3 and -3.3 with high precision (% RSD $\leq$ 3.1). The present method is considered to be suitable for quality control evaluation on liquid drinks and other complex formulations fortified with L-muscone.

• KSBB Journal
• /
• v.16 no.4
• /
• pp.327-331
• /
• 2001

Catechin compounds from the Green tea cultivated in Bosung (Chollanamdo) were extracted using supercritical fluid and various additives, and analyzed by reversed-phase high performance liquid chromatography (RP-HPLC). The chromatographic column was packed with LiChrospher 100RP-18(15 $\mu$m), and water was used as the mobile phase with 0.05% phosphoric acid and acetonitrile. Gradient election was applied to separate EGCG by changing the mobile phase compositions. Comparing the extraction yield of three different types of supercritical fluids, pure CO$_2$, with additives of water and ethanol (5 wt,%), the extraction amount of EGCG was most abundant in the suprcritical CO$_2$with ethanol. However, more was extracted and pure higher purity was achieved by solvent extraction using ethanol.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.3-11
• /
• 2012

Some methods used for the recovery of osmium and ruthenium from primary/secondary sources are reviewed. Both Ru and Os could form volatile oxides which enable their separation from the other PGMs by distillation as a traditional method. In hydrochloric acid solution, they also form chloro-complexes with different valence states. Amines or amine based mixture have been used to extract Ru. Solvating extractants are employed to separate Ru and Os. The detailed extraction and stripping conditions of several solvent extraction processes have been reviewed. As an alternative to solvent extraction, solid-liquid method can be applied to recover trace amount of these metals.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.469-478
• /
• 2022

Tritium was extracted from tritium-contaminated aluminum samples by heating it in a high-temperature furnace at 200, 300, or 400 ℃ for 15 h. The extracted tritium was analyzed by using a liquid scintillation counter (LSC); the sample thicknesses were 0.4 and 2 mm. The differences in tritium extraction over time were also investigated by cutting aluminum stick samples into several pieces (1, 5, 10, and 15) with the same thickness, and subsequently heating them. The results revealed that there are most of the hydrated material based on tritium on the surface of aluminum. When the temperature was increased from 200 or 300 ℃-400 ℃, there are no large differences in the heating duration required for the radioactivity concentration to be lower than the MDA value. Additionally, at the same thickness, because the surface of aluminum is only contaminated to tritiated water, cutting the aluminum samples into several pieces (5, 10, and 15) did not have a substantial effect on the tritium extraction fraction at any of the applied heating temperatures (200, 300, or 400 ℃). The proportion of each tritium-release materials (aluminum hydrate based on tritium) were investigated via diverse analyses (LSC, XRD, and SEM-EDS).

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.257-262
• /
• 2010

Patulin, a secondary metabolite of mold, is commonly found in rotten apples. Many countries regulate patulin at levels ranging from 30 to $50\;{\mu}g/L$. Most analytical methods for removing patulin from apple juice include liquid-liquid extraction (LLE), which is time and labor intensive. To replace the LLE method, a solid-phase extraction (SPE) method has been developed for apple juice and unfiltered apple juice. A portion of the test sample was applied to a macroporous copolymer cartridge and washed with 5 mL of 1% sodium bicarbonate, followed by 5 mL of 1% acetic acid. Patulin was eluted with 5 mL of 2% acetonitrile in anhydrous ethyl ether. The mobile phase was tetrahydrofuran in water (0.8:99.2) and was detected with a UV detector at 276 nm. Recoveries ranged from 95 to 101% in test samples, and the minimum detectable level was 30 ppb. Because this SPE method is fast, easy, reliable, and inexpensive, it could be applicable for companies or analytical agencies to analyze patulin concentrations in apple juice.

• Journal of Pharmacopuncture
• /
• v.15 no.4
• /
• pp.52-65
• /
• 2012

Objectives: Toad venom, called Chan-Su, is a traditional Oriental medicine secreted from the auricular and the skin glands of the Bufo bufo gargarizanz Cantor or B. melanosticus Schneider and has been widely used in China, Korea and other parts of Asia for the treatment of pain, heart conditions, and cancer. We examined the concentrations of the main chemical constituents within a commercially available toad venom product and compared the levels for different extraction methods. Methods: Toad venom was extracted using either cold or hot water, ethanol (EtOH), methanol (MeOH), or ethyl acetate (EtOAc), was fractionated using precipitation or reflux, and was then analyzed using thin layer chromatography (TLC), high-performance liquid chromatography (HTLC), and liquid chroma-tography - mass spectrometry (LC-MS). Individual components were identified by comparisons of the retention times, the ultraviolet spectra, and mass spectras and differences in chemical constituents for different solvents and extraction methods are presented. Results: Components with authentic standards, including serotonin and bufodienolides (cinobufagen, bufalin, cinobufalin, and resibufogenin), were detected. The water extract of toad venom contained the greatest amount of serotonin ($75.7{\pm}0.1$ mg/g), but very small amounts of bufodienolides ($3.8{\pm}0.0$ mg/g). In contrast, the use of MeOH or EtOH extraction solutions resulted in 5-26 times higher concentrations of bufodienolides, with only trace amounts of serotonin. The relative and the absolute concentrations of the component also varied based on the extraction method; i.e., EtOH extracts yielded the greatest total amounts of bufodienolides, and EtOAc precipitation had the lowest amounts of bufodienolides. Conclusions: Toad venom consists of serotonin and several bufodienolides, and the choice of solvent to extract chemical the constituents is important as a way to enrich the purported active components for treating different conditions.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.6
• /
• pp.55-61
• /
• 2015

Based on the literature study for the determination of perchlorate in soil we chose the ion chromatography as a measurement method and decided to use 70 mM KOH as an eluent to avoid the interference derived from the co-elution of pyrophosphate (P₂O₇⁴⁻), tripolyphosphate (P₃O₁₀⁵⁻). Also we proposed to use air dried soil through 0.15 mm sieve and distilled water as an extractant. Under the these basic concepts, we carried out the experiments to set up the detail procedure like solid to liquid ratio (S/L ratio), extraction time, device for extraction and indicating factors for quality control (e.g. precision, accuracy, MDL, LOQ). In case of time and device for extraction, 5 hours of mechanical shaking or 1 hour of centrifugation showed better precision and accuracy than that of sonication for 1 hour According to these results, we proposed the extraction method combining 5 hours of mechanical shaking with 1 hour of centrifugation. From the aspect of S/L ratio, the ratio of 1/2 or 1/3 showed resonable precision and accuracy. In case of the ratio of 1/2, there would be some problems in the separation process when the proportion of fine particle is high. Therefore, we proposed the extraction ratio of solid to liquid as 1/3 instead of 1/2. With the consideration of cost effectiveness and soil salinity, we proposed the use of cartridge for removing the interfering anions like chloride, sulfate and carbonate in specific sample such as saline soil.