• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.820-823
• /
• 2003

Recently, the linear motors have been widely used in the industry, owing to various advantages in comparison with conventional feed mechanism; high speed, high acceleration and high stiffness. In addition, the linear motors have the merits of a good velocity control, reversible movement and long lifetime. For the application of the linear motors to vibrating conveyor, the study of vibrating characteristics is required. In this paper, we developed the linear vibrating conveyor using the linear motor that has the 410N thrust and the 7.2m/min maximum moving velocity. To accomplish this system, we had some experiments that included the influence of deceleration time, vibrating amplitude and additional weight.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.101-106
• /
• 1998

This paper deals with the difference of the static and kinetic thrust characteristics of a linear pulse motor(LPM) without and with feedback control for a total artificial heart(TAH). In general, the kinetic thrust of LPM without feedback control decreases as increasing the mover velocity. The kinetic thrust characteristics of the LPM with feedback control are improved approximately 30% as compared with the LPM without feedback control in the high velocity range.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.93-98
• /
• 2001

This paper studies on the design of an ILQ(Inverse Linear Quadratic optimal control) looper control system for hot strip mills. The looper which is placed between each stand plays an important role in controlling strip width by regulating strip tension variation generated from the velocity difference of main work rolls. The mathematical model for looper is firstly obtained by Taylor's linearization of nonlinear differential equations, where it is given as a linear and time invariant state-space equation. Secondly, a looper servo controller is designed by ILQ control algorithm, which is an inverse problem of LQ(Linear Quadratic optimal control) control. By tunning control gain arbitration parameters and time constants, it is shown that the ILQ looper servo controller has the performance that makes well to follow desired trajectories of both strip tension and looper angle.

• 동력기계공학회지
• /
• 제14권3호
• /
• pp.64-70
• /
• 2010

In this study, designing of precise linear transferring device which can be applied to industrial machine and robot industry has been introduced. The direction of power flow and output feature are similar to current Rack-Pinion type. However, unlimited length extensity via rack modulizing, and securing high velocity transportation have been realized by applying Pin-Pinion Gear type at the operation part. The analysis has been calculated to obtain the Pin-Pinion Gear's optimized tooth profile. As a result of research, it is impossible to control precisely even overlap at the teeth of involute and sprocket. Because they have peculiar gearing structure. Therefore, modified cycloid tooth has been proposed to perform high velocity, precise control without backlash.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.860-863
• /
• 1996

In this paper, we formulate the extended Kalman filter for calibration of gimballed inertial navigation system (GINS) at a pure navigation mode with 1500 ft/sec initial velocity and compare its performance to the linear Kalman filter's by using Monte-Carlo analysis method. It has been shown that estimation performance of the extended Kalman filter is better than that of the linear Kalman filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.699-703
• /
• 2004

The autopilot system targets decreasing labor, working environment, service safety security and elevation of service efficiency. Ultimate purpose is minimizing number of crew for guarantee economical efficiency of shipping service. Recently, being achieving research about Course Keeping Control, Track Keeping Control, Roll-Rudder Stabilization, Dynamic ship Positioning and Automatic Mooring Control etc. which compensate nonlinear characteristic using optimizing control technique. And application research is progressing using real ship on actual field. Relation of Rudder angle which adjusted by Steering Machine and ship-heading angle are non-linear. And, Load Condition of ship acts as non-linear element that influence to Parameter of ship. Also, because the speed of a current and direction of waves, velocity and quantity of wind etc. that id disturbance act in non-linear form, become factor who make service of shipping painfully. Therefore, service system of shipping requires robust control algorithm that can overcome nonlinearity. In this paper, Using GA algorithm,design autopilot system of ship that could overcome the non-linear factor of ship and disturbance and examined result through simulation.

• 제어로봇시스템학회논문지
• /
• 제13권10호
• /
• pp.978-982
• /
• 2007

This paper presents the velocity estimation of a mobile robot using a regular polygonal array of optical mice that are installed at the bottom of a mobile robot. First, the basic principle of the proposed velocity estimation method is explained. Second, the velocity kinematics from a mobile robot to an array of optical mice is derived as an overdetermined linear system. Third, for a given set of optical mouse readings, the mobile robot velocity is estimated based on the least squares solution to the obtained system. Finally, simulation results are given to demonstrate the validity of the proposed velocity estimation method.

• International Journal of Control, Automation, and Systems
• /
• 제6권5호
• /
• pp.713-721
• /
• 2008

This paper presents the robust velocity estimation of an omnidirectional mobile robot using a polygonal array of optical mice that are installed at the bottom of the mobile robot. First, the velocity kinematics from a mobile robot to an array of optical mice is derived as an overdetermined linear system. The least squares velocity estimate of a mobile robot is then obtained, which becomes the same as the simple average for a regular polygonal arrangement of optical mice. Next, several practical issues that need be addressed for the use of the least squares mobile robot velocity estimation using optical mice are investigated, which include measurement noises, partial malfunctions, and imperfect installation. Finally, experimental results with different number of optical mice and under different floor surface conditions are given to demonstrate the validity and performance of the proposed least squares mobile robot velocity estimation method.

• 한국정보통신학회논문지
• /
• 제21권4호
• /
• pp.688-697
• /
• 2017

비선형 시스템의 이동 로봇을 원하는 목표점으로 속도, 가속도 그리고 각속도 관련 에너지를 최소한으로 사용하여 최단시간 안에 이동시키는 최적의 제어 문제를 수학적으로 푸는 것이 매우 어렵다. 본 논문에서는 유전알고리즘을 이용하여 이동 로봇의 속도, 각속도 관련 에너지를 최소화하면서 최단시간 안에 이동할 수 있는 최적제어이득을 구한다. 이동 로봇은 비선형시스템이므로 초기위치에 따라 최적제어이득이 다르게 결정된다. 따라서 초기위치 분할 점들을 설정하고 각 분할 점에서 유전알고리즘을 이용하여 최적제어이득을 구한다. 각 분할 점에서 구한 최적제어 이득으로 신경회로망을 학습시켜서 임의의 초기위치에 대한 제어이득을 구할 수 있다. 마지막으로 본 연구의 유용성을 컴퓨터 시뮬레이션 연구로 확인한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1624-1627
• /
• 2005

We proposed a design technique for auto-landing guidance and control system. This technique utilizes linear controller and neural network. Main features of this technique is to use conventional linear controller and compensate for the error coming from the model uncertainties and/or reference model mismatch. In this study, the multi-perceptron neural network with single hidden layer is adopted to compensate for the errors. Glide-slope capture logic for auto-landing guidance and control system is designed in this technique. From the simulation results, it is observed that the responses of velocity and pitch angle to commands are fairly good, which are directly related to control inputs of throttle and elevator, respectively.