• Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.349-362
• /
• 2016

The numerical solutions of unsteady hydromagnetic natural convection Couette flow of a viscous, incompressible and electrically conducting fluid between the two vertical parallel plates in the presence of thermal radiation, thermal diffusion and diffusion thermo are obtained here. The fundamental dimensionless governing coupled linear partial differential equations for impulsive movement and uniformly accelerated movement of the plate were solved by an efficient Finite Element Method. Computations were performed for a wide range of the governing flow parameters, viz., Thermal diffusion (Soret) and Diffusion thermo (Dufour) parameters, Magnetic field parameter, Prandtl number, Thermal radiation and Schmidt number. The effects of these flow parameters on the velocity (u), temperature (${\theta}$) and Concentration (${\phi}$) are shown graphically. Also the effects of these pertinent parameters on the skin-friction, the rate of heat and mass transfer are obtained and discussed numerically through tabular forms. These are in good agreement with earlier reported studies. Analysis indicates that the fluid velocity is an increasing function of Grashof numbers for heat and mass transfer, Soret and Dufour numbers whereas the Magnetic parameter, Thermal radiation parameter, Prandtl number and Schmidt number lead to reduction of the velocity profiles. Also, it is noticed that the rate of heat transfer coefficient and temperature profiles increase with decrease in the thermal radiation parameter and Prandtl number, whereas the reverse effect is observed with increase of Dufour number. Further, the concentration profiles increase with increase in the Soret number whereas reverse effect is seen by increasing the values of the Schmidt number.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.6
• /
• pp.60-68
• /
• 2010

In this study, the conventional plane tip, double squealer tip, and various groove tip blades were tested in a linear cascade in order to measure the effect of the tip shapes on tip surface heat transfer coefficient distributions. Detailed heat transfer coefficient distributions were measured using a hue-detection based transient liquid crystals technique. Two tip gap clearances of 1.5% and 2.3% of blade span were investigated and the Reynolds number based on cascade exit velocity and chord length was $2.48{\times}10^5$. Results showed that the overall heat transfer coefficients on the tip surface with various grooved tips were lower than those with plane tip blade. The overall heat transfer coefficient on grooved along suction side tip was lower than that on the squealer tip.

• Journal of Family Resource Management and Policy Review
• /
• v.22 no.1
• /
• pp.23-37
• /
• 2018

This study aimed to investigate resource transfer for baby boomers' adult children and related factors pertaining to baby boomers' later-life preparation. This study was conducted in 2016 using written questionnaires completed by 405 baby boomers residing in Seoul and metropolitan cities in South Korea. The data were analyzed using IBM SPSS Statistics 23.0 and the following statistical methods: frequency, percentiles, the mean, standard deviation, a t-test, one-way ANOVA, Cronbach's alpha, and hierarchical multiple linear regression analysis. Baby boomers' average level of later-life preparation was found to be 3.45/5, a relatively rational score. Baby boomers tended to transfer more resource from their adult children when they had many adult children, were more satisfied with their romantic relationship. Baby boomers' level of later-life preparation was higher when there was lesser resource transfer of their adult children. The greatest influential variables pertaining to the respondents' later-life preparation were their family's income, children's marital status, satisfaction with their romantic relationship, and level of transfer from their adult children. It was concluded that baby boomers have insufficient later-life preparation in terms of finances due to their need to support their adult children; thus, nation-wide practical programs are needed to prepare baby boomers for a happy life.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.5
• /
• pp.567-576
• /
• 1999

An experimental study has been conducted to investigate the effects of the free stream turbulence intensity and Reynolds number on the heat transfer and flow characteristics In the linear turbine cascade. Profiles of the time-averaged velocity, turbulence intensity, and Reynolds stress were measured in the turbine cascade passage. The static pressure and heat transfer distributions on the blade suction and pressure surfaces were also measured. The experiments were made for the Reynolds number based on the chord length, Rec = $2.2{\times}10^4$ to $1.1{\times}10^5$ and the free stream turbulence intensity, $FSTI_1$ = 0.6% to 9.1 %. The uniform heat flux boundary condition on the blade surface was created using the gold film Intrex and the surface temperature was measured by liquid crystal, while hot wire probes were used for the flow measurements. The results show that the free stream turbulence promotes the boundary layer development and delays the flow separation point on the suction surface. It was found that the boundary layer flows on the suction surface for all Reynolds numbers tested with $FSTI_1$ = 0.6% are laminar. It was also found that the heat transfer coefficient on the blade surface increases as the free stream turbulence intensity increases and the flow separation point moves downstream with an increasing Reynolds number. The results of skin friction coefficients are in good agreement with the heat transfer results in that for $FSTI_1{\geq}2.6%$, the turbulent boundary layer separation occurs.

• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.281-291
• /
• 1995

The objective of this work is to obtain the experimental data for the heat transfer processes occurring both on the inside and outside surfaces of containment steel wall with dry and wet outer surface conditions in the passive containment cooling system. The test model represented a 60$^{\circ}$ section of a containment vessel based on the AP 600 geometry. Major linear dimensions of the test model ore reduced tv a factor of ten. To simulate the decay heat a steam generator heated by electricity was placed in the test model. The maximum heat flux was 8.91 kW/$m^2$. Two types of tests were performed. The one was the tort on the natural convection of air without water film flow. The other was the evaporative heat transfer test with the falling water film flow and natural air draft. no test result shooed that the heat transfer capability by the natural convection from the containment to the air without oater film flow was limited at about 1.48 kW/$m^2$ heat flux. It was found that the heat removal capability was remarkably enhanced in the tests with the waster film flow and air draft. The obtained heat transfer data ore compared with the existing correlations.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1165-1169
• /
• 2012

The fluorescence intensity of DNA-intercalated ethidium with [ethidium]/[DNA base] being 0.005 was quenched upon the binding of another intercalating ligand, meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (TMPyP). Addition of $Ca^{2+}$ enhanced the quenching efficiency. The range of separations between donor and acceptor molecules, within which total quenching occurs, was calculated using a one-dimensional resonance energy transfer mechanism to be 9.5 base-pairs or $32.3{\AA}$ in the absence of $Ca^{2+}$ ions. The distance increased to 18.7 base-pairs or about $63.6{\AA}$ in the presence $100{\mu}M$ $Ca^{2+}$. Considering that (1) $Ca^{2+}$ had little effect on the binding modes of ethidium and TMPyP, which was investigated by reduced linear dichroism and (2) spectral overlap between the emission spectrum of ethidium and the absorption spectrum of TMPyP was maintained in the presence of $Ca^{2+}$, contributions from orientation factor and spectral overlap to $Ca^{2+}$-induced enhancement in DNA mediated energy transfer was limited. Although there is no direct evidence, electron transfer along the DNA stem may accompany the observed fluorescence quenching. In this respect, DNA bound $Ca^{2+}$ act as a partially conducting medium.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.311-318
• /
• 2010

In this study, the conventional plane tip, double squealer tip, and various groove tip blades were tested in a linear cascade in order to measure the effect of the tip shapes on tip surface heat transfer coefficient distributions. Detailed heat transfer coefficient distributions were measured using a hue-detection based transient liquid crystals technique. Two tip gap clearances of 1.5% and 2.3% of blade span were investigated and the Reynolds number based on cascade exit velocity and chord length was $2.48{\times}10^5$. Results showed that the overall heat transfer coefficients on the tip surface with various grooved tips were lower than those with plane tip blade. The overall heat transfer coefficient on grooved along suction side tip was lower than that on the squealer tip.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.6
• /
• pp.697-704
• /
• 2006

The paper is concerned with $H_{\infty}$ filtering for descriptor systems. A necessary and sufficient condition is established in terms of linear matrix inequalities(LMIs) for the existence of normal filters such that the error systems are admissible and the transfer function from the disturbance to the filtering error output satisfies a prescribed $H_{\infty}$-norm bound constraint. When these LMIs are feasible, an explicit parameterization expression of all desired normal filter is given. All these results are yielded without decomposing the original descriptor systems, which makes the filter design procedure simple and direct. Finally, a numerical example is derived to demonstrate the applicability of the proposed approach.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.1-10
• /
• 1999

We consider the problem of synthesizing an internally stabilizing linear time-invariant controller for a linear tune-Invariant plant such that a given closed loop transfer function is strictly sector bounded. We show that the standard $H{\infty}$ control problem and the $\tau$ -positive real control problem are special cases of sector bounded control problem. Necessary and sufficient conditions for the existence of a controller are obtained. The state-space representation for strictly proper controllers are given in terms of solutions to ARIs or AREs.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.213-216
• /
• 2000

Minimum-cost linear network flow problems could be transformed with equal to assignment problems. Traditional method to solve the linear network flow problems are improved source-cost by transform the simple cycle flow. Auction algorithm could be applied to same element using the initial target price and dispersion calculation. Also, each elements are obtained by $\varepsilon$-relaxation methods. In this paper we proposed; 1)minimum-cost flow problem, 2)minimum-cost flow problem by the mathematical equivalent and 3) extraction $\varepsilon$-relaxation & expand transfer problem with minimum-cost flow. It can be applicant to PCB design by above mentioned.