• 한국전산구조공학회논문집
• /
• 제14권4호
• /
• pp.515-523
• /
• 2001

본 논문에서는 고준위 핵폐기물의 지하 처분 시 사용되는 핵폐기물 처분장치의 기본 구조설계에 필요한 처분장치내의 핵 폐기물다발들을 지지하는 내부 삽입물의 구조형상과 재원 또 처분장치의 화학적 부식을 방지하기 위해 외곽에 설치하는 외곽쉘과 위아래 덮개의 두께를 결정하기 위하여 처분장치 구조물에 대한 선형정적 구조해석을 수행하였다. 해석 대상 처분장치는 가압경수로와 중수로의 핵폐기물 처분장치를 사용하였다. 일반적으로 핵폐기물 처분장치는 지하수백 미터에 위치하는 화강암 등의 암반 내에 설치하게 되는데 이 때 지하수의 침수에 의한 지하수압 및 처분장치 외곽에 완충장치로 설치하는 벤토나이트 버퍼의 팽윤압을 견디어 내야 한다. 따라서 이와 같은 압력의 변화에 따른 처분장치 구조물에 발생하는 응력 및 변형 등을 알기 위해서는 처분장치 구조물에 대한 구조해석을 수행해야 된다. 이를 위하여 본 논문에서는 처분장치에 대하여 선형정적 구조해석을 수행하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권9호
• /
• pp.493-498
• /
• 2002

Double-side linear pulse motor(DSLPM) has more advantages than single-side linear pulse motor because noise and vibration can be considerably decreased by countervailing the normal forces, which is generated between two stators and mover. However, DSLPM has more complicated magnetic flux path and layout of stator pole toot/mover tooth rather than single-side linear pulse motor In this paper, DSLPM is designed and fabricated by considering the air gap magnetic density, shape of tooth and slot. In order to verify the characteristics of DSLPM, the air gap magnetic flux density is analyzed by 2D FEM and the magnetic flux path is analyzed by 3D FEM. Also the static thrust forces is obtained with the analyzed results.

• 한국지진공학회논문집
• /
• 제26권1호
• /
• pp.1-11
• /
• 2022

In this study, the seismic performance of a two-story unreinforced masonry (URM) building was assessed following the linear and nonlinear static procedures specified in the seismic evaluation guideline of existing buildings. First, the provisions to assess failure modes and shear strengths of URM walls and wall piers were reviewed. Then, a two-story URM building was assessed by the linear static procedure using m-factors. The results showed that the walls and wall piers with aspect ratios h_e // (i.e., effective height-to-length ratio) > 1.5 were unsafe due to rocking or toe crushing, whereas the walls with h_e // ≤ 1.5 and governed by bed-joint sliding mainly were safe. Axial stresses and shear forces acted upon individual masonry walls, and wall piers differed depending on whether the openings were modeled. The masonry building was reevaluated according to the nonlinear static procedure for a more refined assessment. Based on the linear and nonlinear assessment results, considerations of seismic evaluation for low-rise masonry buildings were given with a focus on the effects of openings.

• 전산구조공학
• /
• 제11권1호
• /
• pp.179-190
• /
• 1998

두개의 케이블요소를 이용한 3차원 케이블망의 정적 비선형 유한요소해석기법을 제시한다. 먼저, 공간 트러스요소와 탄성현수선 케이블요소(elastic catenary cable element)의 접선강도행렬과 질량행렬을 유도하는 과정을 간략히 요약한다. 지점 변위를 일으키고 자중을 받는 케이블망의 초기평형 상태를 결정하기 위하여, Newton-Raphson 반복법에 근거한 하중증분법과 현수케이블요소를 적용하는 경우에 viscous damping을 고려한 dynamic relaxation법을 제시한다. 또한 초기의 정적평형상태를 기준으로 추가하중에 대한 케이블망의 정적 비선형해석을 수행한다. 지점변위와 외력을 받는 케이블 구조에 대하여 비선형해석을 수행하고, 해석결과들을 기존의 문헌의 결과와 비교, 검토하므로써 본 논문에서 제시한 이론 및 해석방법의 타당성을 입증한다.

• 한국소음진동공학회논문집
• /
• 제22권1호
• /
• pp.46-52
• /
• 2012

Since the engine and reduction gear in a naval vessel are usually supported by the mounting system separately, the misalignment between the input shaft of the reduction gear and the output shaft of the engine should occur caused by ship motion. In this study, this misalignment is estimated from the linear static analysis assuming that the phase of movements of the engine and reduction gear at low frequency range is same and the dynamic effect is not affect to them. Through comparing the relative displacement of the engine and reduction gear calculated from linear static analysis to that from dynamic analysis as well as experiment, the assumption in this study could be verified.

• 제어로봇시스템학회논문지
• /
• 제11권11호
• /
• pp.913-919
• /
• 2005

An advanced method of Relaxed Static Stability (RSS) is utilized for improving the aerodynamic performance of modem version supersonic jet fighter aircraft. The flight control system utilizes RSS criteria in both longitudinal and lateral-directional axes to achieve performance enhancements and improve stability. Standard CLDA (Control Law Design and Analysis) process is provided that reduce the development period of the flight control system. In addition, if this process is employed in developing flight control laws, it reduces the trial and error development and verification of control laws. This paper details the design process of developing a flight control law for the RSS aircraft, utilizing military specifications, linear and nonlinea, analysis using XMATH and ATLAS(Aircraft, Tim Linear and Simulation), handling quality tests using the HQS (Handling Quality Simulator), and real flight test results to verify aircraft dynamic flight responses.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.43-49
• /
• 1995

Sasol Advanced Synthol Reactor was divided into two chambers by grid plate perforated with diffuser holes. The reactor has high stress level beacuse of membrane stress due to internal pressure, thermal stress due to temperature difference and local stress due to structural discontinuity at the juncture of grid plate and shell. Moreover, geometric nonlinear behaviors may appear in the grid plate because of pressure difference between two chambers. In order to survey the stress level and geometric nonlinear behaviors around grid plate, heat transfer analysis, linear static analysis and geometric nonlinear analysis were performed using NISA II developed by EMRC. This paper demonstrates the result of accessment for linear static and geometric nonlinear analysis under various load combinations.

• Structural Engineering and Mechanics
• /
• 제55권5호
• /
• pp.913-929
• /
• 2015

The ratcheting and strain cyclic behaviour of joined conical-cylindrical shells under uniaxial strain controlled, uniaxial and multiaxial stress controlled cyclic loading are investigated in the paper. The elasto-plastic deformation of the structure is simulated using Chaboche non-linear kinematic hardening model in finite element package ANSYS 13.0. The stress-strain response near the joint of conical and cylindrical shell portions is discussed in detail. The effects of strain amplitude, mean stress, stress amplitude and temperature on ratcheting are investigated. Under strain symmetric cycling, the stress amplitude increases with the increase in imposed strain amplitude. Under imposed uniaxial/multiaxial stress cycling, ratcheting strain increases with the increasing mean/amplitude values of stress and temperature. The abrupt change in geometry at the joint results in local plastic deformation inducing large strain variations in the vicinity of the joint. The forcing frequency corresponding to peak axial ratcheting strain amplitude is significantly smaller than the frequency of first linear elastic axial vibration mode. The strains predicted from quasi static analysis are significantly smaller as compared to the peak strains from dynamic analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.584-587
• /
• 1992

Because linear motor directly drives linear motion, it does not need conversion equipment such as belt and gear. Especially linear pulse motor provide more precise positioning and large force of linear pulse motors. As current manufacture technic of linear pulse motor is much to be desired at home. This motor lay out to make use of computer aided design program, In this paper the experimental motor is 2-phases 4-poles hybrid pulse motor which has teeth per pole Simulation program is divided its function into 4 parts - air gap permeance analysis, permanent magnet & non-linear core operating point determine, winding configuration, leakage flux analysis. It is possible to make motor static and magnetic characteristics for this simulation program. Also, by varying input parameters of the program, experimental motor is to be compared to motor characteristics.

• Structural Engineering and Mechanics
• /
• 제39권4호
• /
• pp.599-620
• /
• 2011

The investigation on possible causes of failures related to documented collapses is a complicated issue, primarily due to the scarcity and inadequacy of information available. Although several studies have tried to understand which are the inherent structural deficiencies or circumstances associated to failure of the main structural elements in a reinforced concrete frame, to the authors knowledge a uniform approach for the evaluation building static vulnerability, does not exist yet. This paper investigates, by means of a detailed case study, the potential failure mechanisms of an existing reinforced concrete building. The linear elastic analysis for the three-dimensional building model gives an insight on the working conditions of the structural elements, demonstrating the relevance of a number of structural faults that could sensibly lower the structure's safety margin. Next, the building's bearing capacity is studied by means of parametric nonlinear analysis performed at the element's level. It is seen that, depending on material properties, concrete strength and steel yield stress, the failure hierarchy could be dominated by either brittle or ductile mechanisms.