DOI QR코드

DOI QR Code

Static vulnerability of existing R.C. buildings in Italy: a case study

  • Maria, Polese (Department of Structural Engineering, University of Naples "Federico II") ;
  • Gerardo M., Verderame (Department of Structural Engineering, University of Naples "Federico II") ;
  • Gaetano, Manfredi (Department of Structural Engineering, University of Naples "Federico II")
  • Received : 2010.09.28
  • Accepted : 2011.05.25
  • Published : 2011.08.25

Abstract

The investigation on possible causes of failures related to documented collapses is a complicated issue, primarily due to the scarcity and inadequacy of information available. Although several studies have tried to understand which are the inherent structural deficiencies or circumstances associated to failure of the main structural elements in a reinforced concrete frame, to the authors knowledge a uniform approach for the evaluation building static vulnerability, does not exist yet. This paper investigates, by means of a detailed case study, the potential failure mechanisms of an existing reinforced concrete building. The linear elastic analysis for the three-dimensional building model gives an insight on the working conditions of the structural elements, demonstrating the relevance of a number of structural faults that could sensibly lower the structure's safety margin. Next, the building's bearing capacity is studied by means of parametric nonlinear analysis performed at the element's level. It is seen that, depending on material properties, concrete strength and steel yield stress, the failure hierarchy could be dominated by either brittle or ductile mechanisms.

Keywords

References

  1. Augenti, N. (2003), "The collapse of a building in Naples in the Arenella zone", Proceedings of International Conference of Structural Diseases and Reliability, May, Naples. (In Italian)
  2. Bal, E., Crowley, H., Pinho, R. and Gülay, F.G. (2007), "Structural characteristics of Turkish RC building stock in Northern marmara region for loss assessment applications", Research Report No. ROSE-2007/03, Iuss Press, Pavia, ISBN: 978-88-6198-003-7.
  3. Cosenza, E., Manfredi, G., Parretti, R., Prota, A., Verderame, G.M. and Fabbrocino, G. (2006), "Seismic assessment and retrofitting of the Tower of the Nations", Proceedings of the 2nd fib Congress, Naples.
  4. Eurocode 2 (2004), "Design of concrete structures - Part 1-1: General rules and rules for buildings", EN 1992-1-1: 2004.
  5. Fardis, M. (2009), "Seismic design, assessment and retrofitting of concrete buildings based on EN-Eurocode 8", Springer, ISBN 978-1-4020-9842-0.
  6. Gori, R. and Muneratti, E. (1997), "Nondeterministic aspects in structural design: proposals for classification of errors", J. Perform. Constr. Fac., 11(4), 184-189. https://doi.org/10.1061/(ASCE)0887-3828(1997)11:4(184)
  7. Gori, R. and Muneratti, E. (1995), "Structural failures of early reinforced concrete constructions", Proceeding of the 6th International conference of Structural Faults and Repair, Edimburgh, 269-273.
  8. Kaltakci, M.Y., Arslan, M.H., Korkmaz, H.H. and Ozturk, M. (2007), "An investigation on failed or damaged reinforced concrete structures under their own-weight in Turkey", Eng. Fail. Anal., 14, 962-967. https://doi.org/10.1016/j.engfailanal.2006.12.005
  9. Kim, Y.M., Kim, C.K. and Hong, S.G. (2006), "Fuzzy based state assessment for reinforced concrete building structures", Eng. Struct., 28, 1286-1297. https://doi.org/10.1016/j.engstruct.2005.12.011
  10. King, S. and Delatte, N.J. (2004), "Collapse of 2000 Commonwealth Avenue: Punching shear case study", J. Perform. Constr. Fac., 18(11), 54-61. https://doi.org/10.1061/(ASCE)0887-3828(2004)18:1(54)
  11. Masi, A. (2003), "Seismic Vulnerability assessment of gravity load designed R/C frames", Bull. Earthq. Eng., 1, 371-395. https://doi.org/10.1023/B:BEEE.0000021426.31223.60
  12. Melchers, R.E. (1999), Structural Reliability Analysis and Prediction, John Wiley & Sons.
  13. Michel, P.P., Sylvan, A., Brandstrom, H. and Magnusson, E. (2001), "Kamedo report n. 85: Collapse of building during wedding reception in Jerusalem", Prehosp. Disast. Med., 22(1), 81-82.
  14. Nehdi, M. and Greenough, T. (2007), "Modeling shear capacity of RC slender beams without stirrups using genetic algorithms", Smart Struct. Syst., 3(1), 51-68. https://doi.org/10.12989/sss.2007.3.1.051
  15. Palmisano, F., Vitone, A., Vitone, C. and Vitone, V. (2001), "The collapse of the building sited in Viale Giotto, Foggia", Proceedings of International Conference of Structural Diseases and Reliability, Venice, December. (In Italian)
  16. Polese, M., Verderame, G.M., Fisciano, R., Cosenza, E. and Manfredi, G. (2006), "Towards a Methodological Approach to Evaluate the Static Vulnerability of Old R.C. Constructions", Proceedings of the 2nd fib Congress, Naples.
  17. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), "Displacement-based seismic design of structures" Iuss-Press editions, Pavia, Italy, ISBN 978-88-6198-000-6.
  18. 121Samra, R.M. (1995), "New analysis for creep behavior in concrete columns", J. Struct. Eng., 121(3), 399-407. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(399)
  19. Singh, C.J. (1976), "Bibliography of Structural Failures 1850-1970", Building Research Establishment, U.K.
  20. Song, J. and Kang, W. (2010), "Probabilistic shear strength models for reinforced concrete beams without shear reinforcement", Struct. Eng. Mech., 34(1), 15-38. https://doi.org/10.12989/sem.2010.34.1.015
  21. Vecchio, F.J., Bentz, E.C. and Collins, M.P. (2004), "Tools for forensic analysis of concrete structures", Comput. Concrete, 1(1), 1-14. https://doi.org/10.1296/CAC2004.01.01.01
  22. Verderame, G.M., Polese, M. and Cosenza, E. (2009), "Vulnerability of existing R.C. buildings under gravity loads: A simplified approach for non sway structures", Eng. Struct., 31(9), 2141-2151. https://doi.org/10.1016/j.engstruct.2009.03.014
  23. Verderame, G.M., Polese, M., Mariniello, C. and Manfredi, G. (2010), "A simulated design procedure for the assessment of seismic capacity of existing RC buildings", Adv. Eng. Soft., 41(2), 323-335. https://doi.org/10.1016/j.advengsoft.2009.06.011
  24. Walker, A.C. (1981), "Study and analysis of the first 120 failure cases", Structural Failures in Buildings, Institute of Structural Engineers, London, U.K.

Cited by

  1. Mechanism based assessment of damage-dependent fragility curves for RC building classes vol.13, pp.5, 2015, https://doi.org/10.1007/s10518-014-9663-4
  2. Seismic response of current RC buildings in Kathmandu Valley vol.53, pp.4, 2015, https://doi.org/10.12989/sem.2015.53.4.791
  3. Assessment of seismic fragility curves for existing RC buildings in Algiers after the 2003 Boumerdes earthquake vol.46, pp.6, 2013, https://doi.org/10.12989/sem.2013.46.6.791
  4. Aftershock collapse fragility curves for non-ductile RC buildings: a scenario-based assessment vol.46, pp.13, 2017, https://doi.org/10.1002/eqe.2894
  5. Seismic Vulnerability for RC Infilled Frames: Simplified Evaluation for As-Built and Retrofitted Building Typologies vol.8, pp.10, 2018, https://doi.org/10.3390/buildings8100137
  6. Simplified assessment of maximum interstory drift for RC buildings with irregular infills distribution along the height pp.1573-1456, 2018, https://doi.org/10.1007/s10518-018-0473-y
  7. Sustainable Selective Mitigation Interventions towards Effective Earthquake Risk Reduction at the Community Scale vol.10, pp.8, 2018, https://doi.org/10.3390/su10082894