• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.777-786
• /
• 2007

This paper presents a modified simulated annealing algorithm to optimize linear scheduling projects with multiple resource constraints and its effectiveness is verified with a proposed problem. A two-stage solution-finding procedure is used to model the problem. Then the simulated annealing and the modified simulated annealing are compared in the same condition. The comparison results and the reasons of improvement by the modified simulated annealing are presented at the end.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.516-518
• /
• 1995

This paper presents the optimal short-term operation scheduling by using fuzzy linear programming method on cogeneration systems connected with auxiliary equipments. Simulation is performed in case of the bottomming cycle. Modeling of cogeneration systems and auxiliary equipments is done, the effectiveness of modeling is evaluated through the detailed simulation. After the optimal operation scheduling is established by using linear programming method, the last optimal operation scheduling is established by using fuzzy linear programming method. The results of simulation show the auxiliary equipments can be effeciently operated in case of the bottomming cycle by modeling proposed in this paper.

• 한국ITS학회 논문지
• /
• 제8권1호
• /
• pp.1-8
• /
• 2009

본 연구는 기존의 버스 운영계획모형을 시스템 다이나믹스(System Dynamics : SD) 관점에서 검토하는 것을 주된 목적으로 하고 있다. 결정변수들 간의 선형적 관계에 기초한 교��비용모델에 SD관점을 적용하여 순환적 관계로의 재구성을 시도하였으며, 그 결과물로 최적배차간격모형의 인과지도(Causal Loop Diagram)을 제시하였다. 또한 계량적 시뮬레이션이 가능한 저유량 인과지도(Stock & Flow Diagram)을 작성하여 시뮬레이션 결과의 의미를 논의하였다. 연구결과, 시뮬레이션에 적용한 수식이 기존의 교통비용모형에 토대를 두고 있기 때문에 시뮬레이션 결과가 기존의 연구와 큰 차이를 보이지 않았다.

• 제어로봇시스템학회논문지
• /
• 제12권7호
• /
• pp.719-727
• /
• 2006

This paper proposes a new method to obtain a maximum allowable delay bound for a scheduling of networked discrete control systems and event-based scheduling method. The proposed method is formulated in terms of linear matrix inequalities and can give a much less conservative delay bound than the existing methods. A network scheduling method is presented based on the delay obtained through the proposed method, and it can adjust the sampling period to allocate same utilization to each control loop. The presented method can handle three types of data (sporadic, emergency data, periodic data and non real-time message) and guarantees real-time transmission of periodic and sporadic emergency data using modified EDF scheduling method.

• 한국건축시공학회지
• /
• 제10권4호
• /
• pp.31-39
• /
• 2010

선형 공정계획 방법은 1929년 엠파이어 스테이트 빌딩에서 그래픽한 용도로 사용되면서 현재는 다양한 작업 공간, 현장 작업과 조립 작업에 적용되고 있다. 선형 공정계획 상에 동시적인 크리티칼 패스가 발생하면 자원 관리는 작업흐름의 최적화 문제로 연결되어 유연한 작업생산성과 지속적인 자원의 할당을 하기 위해 적용되고 있다. 그러나 선형 공정계획 모델 연구에서 간과하고 있는 선형 공정계획 모델의 작업 관계성을 고려하는 것이 필요하다. 이에 본 연구는 선형 공정계획 모델에 관한 기존 연구를 분석하여 네트워크 공정표의 관계성을 선형 공정표에 적용할 수 있는 방법을 제시한다. 네트워크 공정표를 선형공정표로 변환 시에 발생하는 작업의 관계성을 고찰하고 건축물의 물리적 층수 변화와 같이 작업공간의 변화에 따라 선형 공정표에 반영되어야 할 선형 공정표상의 액티비티의 이동 문제를 고찰하여 네트워크 공정표를 선형 공정표로 호환할 수 있는 시스템 개발을 위한 기초연구를 제공하는 것이 본 연구의 목적이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.428-430
• /
• 1997

An LQG/LTR based gain scheduling control scheme for the two link inverted pendulum is presented. It is shown by simulation that the gain scheduling scheme based on the robust linear control theory still preserves the robust property of the linear control scheme and can be applied to control a class of nonlinear systems.

• 대한산업공학회지
• /
• 제24권4호
• /
• pp.591-600
• /
• 1998

The scheduling of parallel computing systems consists of two procedures, the assignment of tasks to each available processor and the ordering of tasks in each processor. The assignment procedure is same with a clustering. The clustering is classified into linear or nonlinear according to the precedence relationship of the tasks in each cluster. The parallel computing system can be modeled with a Directed Acyclic Graph(DAG). By the granularity theory, DAG is categorized into Coarse Grain Type(CDAG) and Fine Grain Type(FDAG). We suggest the linear clustering method for the scheduling of CDAG using the genetic algorithm. The method utilizes a properly that the optimal schedule of a CDAG is one of linear clustering. We present the computational comparisons between the suggested method for CDAG and an existing method for the general DAG including CDAG and FDAG.

• 전자공학회논문지A
• /
• 제29A권4호
• /
• pp.74-82
• /
• 1992

This paper deals with the scheduling problems, which are the most important subtask in High-level Synthesis. ILP(integer linear programming) formulations are used as a scheduling problem approach.For practical application to digital system design, we have concentrated our attentions on pipelined datapath scheduling. For experiment results, we choose the 5-th order digital wave filter as a benchmark and do the schedule. Finally, we can obtain better and near-optimal scheduling results.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.777-786
• /
• 1999

This work is concerned with the assignment of the desired eigenstructure for linear time-varying systems such as missiles, rockets, fighters, etc. Despite its well-known limitations, gain scheduling control appeared to be the focus of the research efforts. Scheduling of frozen-time, frozen-state controller for fast time-varying dynamics is known to be mathematically fallacious, and practically hazardous. Therefore, recent research efforts are being directed towards applying time-varying controllers. In this paper, ⅰ) we introduce a differential algebraic eigenvalue theory for linear time-varying systems, and ⅱ) we also propose an eigenstructure assignment scheme for linear time-varying systems via the differential Sylvester equation based upon the newly developed notions. The whole design procedure of the proposed eigenstructure assignment scheme is very systematic, and the scheme could be used to determine the stability of linear time-varying systems easily as well as provides a new horizon of designing controllers for the linear time-varying systems. The presented method is illustrated by a numerical example.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1622-1626
• /
• 2011

Recently, interests on microgrids have been growing as clean power systems. Microgrids include small scaled distributed generation such as wind and solar power as well as diesel generators as main power sources. To operate a microgrid effectively, optimal scheduling for the microgrid is important. Especially, in the grid-connected mode, power trades between the microgrid and the power grid should be considered in optimal scheduling. In this paper, mathematic models for optimal operation of a microgrid were established based on the linear programming. In particular, the shiftable load was considered in the models to optimize it in microgrid operation. To show feasibility of the proposed models, they were applied to optimal microgrid operation and the results were discussed.