• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.708-717
• /
• 2003

With the development of precision manufacturing technologies, the importance of precision positioning devices is increasing. Conventional actuators, dual stage or mechanically contacting type, have limitation in coping with performance demands. As a possible solution, magnetic suspension technology was studied. Such a contact-free system has advantages in terms of high accuracy, low production cost and easy adaptability to high precision manufacturing processes. This paper deals with magnetically suspended multi-degrees of freedom actuator which can realize large linear motion. In this paper, the operating principle is explained with the magnetic force analysis, and the equations of motion are derived. Experimental results of the implemented system are also given.

• Kyungpook Mathematical Journal
• /
• 제47권3호
• /
• pp.381-392
• /
• 2007

In 1906, da Rios, a student of Leivi-Civita, wrote a master's thesis modeling the motion of a vortex in a viscous fluid by the motion of a curve propagating in $R^3$, in the direction of its binormal with a speed equal to its curvature. Much later, in 1971 Hasimoto showed the equivalence of this system with the non-linear Schr$\ddot{o}$dinger equation (NLS) $$q_t=i(q_{ss}+\frac{1}{2}{\mid}q{\mid}^2q$$. In this paper, we use the same idea as Terng used in her lecture notes but different technique to extend the above relation to the case of $R^3$, and obtained an analogous equation that $$q_t=i[q_{ss}+(\frac{1}{2}{\mid}q{\mid}^2+1)q]$$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.314-316
• /
• 2001

This paper present the position control method for the application of permanent magnet linear synchronous motor. Controller is designed as a conventional P-PI controller, but the extra information is used such as velocity and acceleration from motion profiles. The profiles comes from S-Curve which is an optimized point-to-point motion profiles to achieve fast motions with minimum vibration[2]. In this application, the targets of the position control are maximum 10um position error within 10msec after respective ending point of position profiles. The implementation of the controller has been done in full digital way. All the controller is designed on the DSP TMS320VC33 control board. To prove performance of the controller, the experiment was performed with a servo linear motor.

• 대한기계학회논문집
• /
• 제12권1호
• /
• pp.131-136
• /
• 1988

본 연구에서는 기반의 주기변위를 받는 주진동계에 비선형스프링과 선형 감쇠를 갖는 비선형동흡진기가 부착된 진동계의 운동방정식을 유도하여 조화바란스법 으로 지면에 대한 주진동계의 상대진폭의 진폭비를 산출하고 안정성해석을 하였으며, 비선형성의 영향과 스프링의 경.연성에 따르는 특성을 규명하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.513-518
• /
• 2001

This research has been performed to estimate the hunting motion hysteresis of railway passenger cars. An old and a new car with almost same structure are chosen as analysis models. To solve effectively a set of simultaneous equations of motion strongly coupled with creep relations, shooting algorithm in which the nonlinear relations are regarded as a two-point boundary value problem is adopted. The bifurcation theory is applied to the dynamic analysis to distinguish differences between linear and nonlinear critical speeds by variation of parameters. It is found that there are some factors and their operation area to make nonlinear critical speed respond to them more sensitivity than linear critical speed. Full-scale roller rig tests are carried out for the validation of the numerical results. Finally, it is concluded that the wear of wheel profile and the stiffness discontinuities of wheelset suspension caused by deterioration have to be considered in the analysis to predict hysteresis of critical speed precisely.

• 대한조선학회지
• /
• 제8권2호
• /
• pp.25-34
• /
• 1971

The characters of linear response of ship among irregular waves were researched. But nonlinear characters of ship motion in irregular waves have not been considered. Then the author showed a method to linearize nonlinearity of damping coefficient of ship by making statistically equivalent linear theory and get equivalent gain K from the condition that the difference of variance between linear response and approximate response is minimum and show that the results of correlogram and spectrum, obtained from this method, for model 700 GT Ferry boat agree with the actual response. The author pays a particular attention not to the nonlinear element but to nonlinear system itself.

• Structural Engineering and Mechanics
• /
• 제23권2호
• /
• pp.177-193
• /
• 2006

Determining the hysteretic energy demand and dissipation capacity and level of damage of the structure to a predefined earthquake ground motion is a highly non-linear problem and is one of the questions involved in predicting the structure's response for low-performance levels (life safe, near collapse, collapse) in performance-based earthquake resistant design. Neural Network (NN) analysis offers an alternative approach for investigation of non-linear relationships in engineering problems. The results of NN yield a more realistic and accurate prediction. A NN model can help the engineer to predict the seismic performance of the structure and to design the structural elements, even when there is not adequate information at the early stages of the design process. The principal aim of this study is to develop and test multi-layered feedforward NNs trained with the back-propagation algorithm to model the non-linear relationship between the structural and ground motion parameters and the hysteretic energy demand in steel moment resisting frames. The approach adapted in this study was shown to be capable of providing accurate estimates of hysteretic energy demand by using the six design parameters.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.697-703
• /
• 2011

In this paper a control system with a high performance dynamic response for linear induction motors (LIMs) is proposed which takes into account the end-effect in both the machine model and the control system. Primary flux oriented control has two major drawbacks i.e. a lack of decoupling of the thrust and the flux and a possibility of system instability due to the end-effect. Both of these drawbacks have been dealt with in this paper. A flux estimation method is proposed to correct the flux orientation error caused by the end effect. Extensive motor performance evaluations under the proposed control system prove its superiority over conventional vector control.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.650-653
• /
• 2001

In recent the energy efficiency of a refrigerator has been restricted extremely. A compressor consumes a great portion of input power in a refrigerator. So it is necessary to develop a more efficient compressor in these days. The existing reciprocating compressor need to a crank shaft to convert the rotating motion to the straight motion and is not efficient. But the linear compressor using mechanic resonance is efficient but need a drive instead of a crank shaft to control a position accurately. However it is impossible to apply a stroke sensor practically because of the internal circumstance of compressor. In this paper, A new sensorless stroke control method using the current and voltage of linear compressor is proposed.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1733-1740
• /
• 2004

In the transverse flux linear induction motor(TFLIM) with the general secondary composed of conductor and back-yoke, there exists a magnetized force into the normal direction or the air-gap direction of the thrust motion as well as the thrust force. Therefore, the various methodologies have been tried to use the normal force by the two independent control variables of the multi-phase input. But, as the force depends inevitably and strongly on the thrust force, it is essential to decouple both forces for two control index. In this paper, we suggest a novel approach capable of compensating the couple between both forces and the control index by using the DC-biased multi-phase input, and then realizing the independent control of TFLIM.