• 대한조선학회논문집
• /
• 제34권2호
• /
• pp.75-84
• /
• 1997

본 연구에서는 스펙트럼 해석법에 기초한 새로운 개념의 정밀한 선체구조 피로강도평가 시스템을 개발하였으며 membrane 방식 LNG 운반선을 대상으로 하여 수치계산을 수행함으로써 그 효용성을 검증하였다. 선체에 작용하는 파랑하중을 스트립 이론으로 직접계산하고 3차원 정밀 구조해석과 영향계수 개념을 바탕으로 Miner 법칙에 의한 누적손상도를 계산하여 설계기준과 비교, 검토하였다.

• 한국해양공학회지
• /
• 제16권1호
• /
• pp.36-40
• /
• 2002

Despite the frequent use of ring-stiffened cylinders as a submarine pressure hull or members of various types of offshore structure, their ultimate strength analysis methods have not been well established because of their complex structural characteristics. This paper has established the method how to use commercial softwares based on the finite element method to implement the ultimate strength analysis of ring-stiffened cylinders covering both types of initial imperfection, i.e. initial deformation and initial stress by combining two separately offered functions of common commercial finite element softwares, linear elastic buckling analysis and nonlinear stress analysis. Developed method was applied to one of the world-widely used commercial softwares. ABAQUS for the analysis of ring stiffened cylinders. This paper ends with some useful information about the imperfection sensitivity of ultimate strength ring stiffened cylinders.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권2호
• /
• pp.82-94
• /
• 2001

The purpose of this paper is to analyze the static and dynamic stability-of the unmanned airship under development ; the target airship's over-all length of hull is 50m and the maximum diameter is 12.5m. For the analysis, the dynamic model of an airship was defined and both the nonlinear and linear dynamic equations of motion were derived. Two different configuration models (KA002Y and KA003Y) of the airship were used for the target model of the static stability analysis and the dynamic stability analysis. From the result of analyses, though the airship is unstable in static stability, dynamic characteristics of the airship can provide the stable dynamic stability. All of the results, airship models and dynamic flight equations will be an important basement and basic information for the next step of developing the automatic flight control system(AFCS) and the stability augmentation system(SAS) for the unmanned airship as well as for the stratospheric airship in the future.

• 대한조선학회논문집
• /
• 제49권5호
• /
• pp.425-432
• /
• 2012

Viscous flow fields of side-by-side arranged two-dimensional floating bodies are numerically simulated by a Navier-Stokes equation solver. Two identical bodies with a narrow gap are forced to heave and sway motions. Square and rounded bilge hull forms are compared to find out the effects of vortex shedding on damping force. Wave height, force RAOs, added mass and damping coefficients including non-diagonal cross coefficients are calculated and a similarity between the wave height and force RAOs is discussed. CFD which can take into account of viscous damping and vortex shedding shows better results than linear potential theory.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1160-1181
• /
• 2014

Springing and whipping are becoming increasingly important considerations in ship design as container ships increase in size. In this study, the springing and whipping characteristics of a large container ship were investigated through a series of systematic model tests in waves. A multi-segmented hull model with a backbone was adopted for measurement of springing and whipping signals. A conversion method for extracting torsion springing and whipping is described in this paper for the case of an open-section backbone. Higher-order springing, higher-mode torsion responses, and the effects of linear and nonlinear springing in irregular waves are highlighted in the discussion.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.114-118
• /
• 2001

Despite the frequent use of ring-stiffened cylinders as a submarine pressure hull or members of various types of offshore sutructures, their ultimate strength analysis methods have not been well established because of their complex structural characteristics. This paper has established the method how to use commercial softwares based on the finite element method to implement the ultimate strength analysis of ring-stiffened cylinders covering both types of initial imperfections, I. e. initial deformation and initial stress by combining two separately offered functions of common commercial finite element softwares, linear elastic buckling analysis and nonlinear stress analysis. Developed method was applied to one of the world-widely used commercial softwares, ABAQUS for the analysis of ring-stiffened cylinders. This paper ends with some useful information about the imperfection sensitivity of ultimate strength of ring-stiffened cylinders.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.144-149
• /
• 2001

A study for the structural strength analysis on the doubler plate subjected to the axial, biaxial in-plane compression and shear load has been performed through the systematic evaluation process. In order to estimate the proper static strength of doubler plate, non-linear elasto-plastic analysis is introduced. Gap element modeling for contact effect between main plate and doubler is prepared and nonlinear analysis procedures are illustrated based on MSC/N4W . In addition, some design guides are suggested through the consideration of several important effects such as corrosion of main plate, doubler width, doubler length and doubler thickness. Finally theses results are compared with developed design formula based on the buckling strength and general trends and design guides according to the variation of design parameters are discussed.

• 대한조선학회지
• /
• 제19권4호
• /
• pp.53-59
• /
• 1982

Relative bow-motions of a ship in wave are investigated by using linear theory. The relative displacement is assumed to be composed of incident wave elevation, motion response, dynamic swell-up and ship wave elevation. Radiation problem is solved by distributing sources on the hull surface and wave elevation in a uniform stream is obtained by integrating Havelock's function with centerplane source distributions. Relative displacements for I.T.T.C. S7-175 model are calculated. Dynamic swell-ups make the relative displacement larger except small heading angles. Amplitudes of relative motion on weather-side are generally larger than those on lee-side. Ship wave elevations in a uniform stream also give considerable contributions and our calculations are verified to be reasonable in comparison with experimental results.

• 대한산업공학회지
• /
• 제18권2호
• /
• pp.43-49
• /
• 1992

Edge coloring problem is to find a minimum cardinality coloring of the edges of a graph so that any pair of edges incident to a common node do not have the same colors. Edge coloring problem is NP-hard, hence it is unlikely that there exists a polynomial time algorithm. We formulate the problem as a covering of the edges by matchings and find valid inequalities for the convex hull of feasible solutions. We show that adding the valid inequalities to the linear programming relaxation is enough to determine the minimum coloring number(chromatic index). We also propose a method to use the valid inequalities as cutting planes and do the branch and bound search implicitly. An example is given to show how the method works.

• 수산해양기술연구
• /
• 제17권2호
• /
• pp.109-113
• /
• 1981

Most existing theories on ship waves and wave resistance are based on the perturbation of the flow field by a small pararr.eter which specifies the slenderness of the ship hull. Since however, ship hulls in practice are neither so slender nor thin enough to secure the validity of the linearized theory, the agreen:ent between the theoretical prediction and the experimental result is not generally satisfactory. The author pointed out that the contribution by the non-linear term in the free surface condition can be represented by sorr.e source distribution over the still water plane. This paper leads to a forrr.ula for the wave resistance of not slender ships at low Froude nurr.bers. and deals with the asynptotic expression. As a nurr.erical example, the wave resistance of Wigley model is calculated, and the result is compared with experimental values. It is concluded that the wave resistance coefficient varies in the rate of Fn6 at low speed limit in general. A comparison with the result derived from the linearized free surface condition shows that the non-linearity of the free surface is irr portant at low speed.